Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor
  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Bug Reports
  3. ESP8266 WiFi gateway issue

ESP8266 WiFi gateway issue

Scheduled Pinned Locked Moved Bug Reports
49 Posts 6 Posters 19.9k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • hekH Offline
    hekH Offline
    hek
    Admin
    wrote on last edited by hek
    #22

    @snow

    Could you perhaps enable "#define MY_DEBUG" in the gateway sketch?

    Would alos be interesting to see the result when you add

    Serial.println(inputString);

    Here:
    https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/core/MyProtocolMySensors.cpp#L36

    1 Reply Last reply
    0
    • snowS Offline
      snowS Offline
      snow
      wrote on last edited by snow
      #23

      Here is the output from the gateway console when I rotate knob on the encoder.

      connected with 00000000, channel 6
ip:192.168.0.110,mask:255.255.255.0,gw:192.168.0.1
.IP: 192.168.0.110
0;0;3;0;9;gateway started, id=0, parent=0, distance=0
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:24
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:24
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:26
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:26
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:28
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:28
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:30
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:30
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:32
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:32
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:34
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:34
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:36
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:36
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:38
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:38
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:40
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:40
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:42
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:42

      Here is output from the gateway console, when I slide down dimmer on the Domoticz

      0;0;3;0;9;read: 3-3-0 s=1,c=1,t=2,pt=0,l=11,sg=0:03M Version
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:0
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:0
0;0;3;0;9;Client 0: 3;1;1;1;3;93M Version
3;1;1;1;3;93M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:93M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:93M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;87M Version
3;1;1;1;3;87M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:87M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:87M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;93M Version
3;1;1;1;3;93M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:93M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:93M Version
0;0;3;0;9;Client 0: 3;1;1;1;2;03M Version
3;1;1;1;2;03M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=2,pt=0,l=11,sg=0,st=ok:03M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=2,pt=0,l=11,sg=0:03M Version
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:0
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:0
0;0;3;0;9;Client 0: 3;1;1;1;2;13M Version
3;1;1;1;2;13M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=2,pt=0,l=11,sg=0,st=ok:13M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=2,pt=0,l=11,sg=0:13M Version
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=2,l=2,sg=0:93
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:93
0;0;3;0;9;Client 0: 3;1;1;1;3;93M Version
3;1;1;1;3;93M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:93M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:93M Version
0;0;3;0;9;read: 3-3-0 s=255,c=0,t=17,pt=0,l=10,sg=0:1.6.0-beta
0;0;3;0;9;read: 3-3-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
0;0;3;0;9;Client 0: 3;255;3;0;6;M Version
3;255;3;0;6;M Version
0;0;3;0;9;send: 0-0-3-3 s=255,c=3,t=6,pt=0,l=9,sg=0,st=ok:M Version
0;0;3;0;9;read: 3-3-0 s=1,c=0,t=4,pt=0,l=0,sg=0:
0;0;3;0;9;read: 3-3-0 s=255,c=3,t=11,pt=0,l=21,sg=0:DimmableLED /w bu
0;0;3;0;9;read: 3-3-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.2
0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=1,l=1,sg=0:93
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=1,l=1,sg=0,st=ok:93
0;0;3;0;9;Client 0: 3;1;1;1;3;80M Version
3;1;1;1;3;80M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:80M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:80M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;73M Version
3;1;1;1;3;73M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:73M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:73M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;67M Version
3;1;1;1;3;67M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:67M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:67M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;60M Version
3;1;1;1;3;60M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:60M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:60M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;53M Version
3;1;1;1;3;53M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:53M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:53M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;47M Version
3;1;1;1;3;47M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:47M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:47M Version
0;0;3;0;9;Client 0: 3;1;1;1;3;40M Version
3;1;1;1;3;40M Version
0;0;3;0;9;send: 0-0-3-3 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:40M Version

0;0;3;0;9;read: 3-3-0 s=1,c=1,t=3,pt=0,l=11,sg=0:40M Version

      The output from sensor console

      Starting...
send: 3-3-0-0 s=255,c=0,t=17,pt=0,l=10,sg=0,st=ok:1.6.0-beta
send: 3-3-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-3 s=255,c=3,t=6,pt=0,l=9,sg=0:M Version
send: 3-3-0-0 s=1,c=0,t=4,pt=0,l=0,sg=0,st=ok:
send: 3-3-0-0 s=255,c=3,t=11,pt=0,l=21,sg=0,st=ok:DimmableLED /w button
send: 3-3-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.2
sensor started, id=3, parent=0, distance=1
Sending in last known light level to controller: 93
send: 3-3-0-0 s=1,c=1,t=3,pt=1,l=1,sg=0,st=ok:93
Ready to receive messages...
read: 0-0-3 s=1,c=1,t=3,pt=1,l=1,sg=0:93
New light level received: 93
Fading level: 1
Fading level: 2
Fading level: 3
Fading level: 4
Fading level: 5
Fading level: 6
Fading level: 7
Fading level: 8
Fading level: 9
Fading level: 10
Fading level: 11
Fading level: 12
Fading level: 13
Fading level: 14
Fading level: 15
Fading level: 16
Fading level: 17
Fading level: 18
Fading level: 19
Fading level: 20
Fading level: 21
Fading level: 22
Fading level: 23
Fading level: 24
Fading level: 25
Fading level: 26
Fading level: 27
Fading level: 28
Fading level: 29
Fading level: 30
Fading level: 31
Fading level: 32
Fading level: 33
Fading level: 34
Fading level: 35
Fading level: 36
Fading level: 37
Fading level: 38
Fading level: 39
Fading level: 40
Fading level: 41
Fading level: 42
Fading level: 43
Fading level: 44
Fading level: 45
Fading level: 46
Fading level: 47
Fading level: 48
Fading level: 49
Fading level: 50
Fading level: 51
Fading level: 52
Fading level: 53
Fading level: 54
Fading level: 55
Fading level: 56
Fading level: 57
Fading level: 58
Fading level: 59
Fading level: 60
Fading level: 61
Fading level: 62
Fading level: 63
Fading level: 64
Fading level: 65
Fading level: 66
Fading level: 67
Fading level: 68
Fading level: 69
Fading level: 70
Fading level: 71
Fading level: 72
Fading level: 73
Fading level: 74
Fading level: 75
Fading level: 76
Fading level: 77
Fading level: 78
Fading level: 79
Fading level: 80
Fading level: 81
Fading level: 82
Fading level: 83
Fading level: 84
Fading level: 85
Fading level: 86
Fading level: 87
Fading level: 88
Fading level: 89
Fading level: 90
Fading level: 91
Fading level: 92
Fading level: 93
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:80M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:80M Version
New light level received: 80
Fading level: 92
Fading level: 91
Fading level: 90
Fading level: 89
Fading level: 88
Fading level: 87
Fading level: 86
Fading level: 85
Fading level: 84
Fading level: 83
Fading level: 82
Fading level: 81
Fading level: 80
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:73M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:73M Version
New light level received: 73
Fading level: 79
Fading level: 78
Fading level: 77
Fading level: 76
Fading level: 75
Fading level: 74
Fading level: 73
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:67M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:67M Version
New light level received: 67
Fading level: 72
Fading level: 71
Fading level: 70
Fading level: 69
Fading level: 68
Fading level: 67
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:60M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:60M Version
New light level received: 60
Fading level: 66
Fading level: 65
Fading level: 64
Fading level: 63
Fading level: 62
Fading level: 61
Fading level: 60
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:53M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:53M Version
New light level received: 53
Fading level: 59
Fading level: 58
Fading level: 57
Fading level: 56
Fading level: 55
Fading level: 54
Fading level: 53
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:47M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:47M Version
New light level received: 47
Fading level: 52
Fading level: 51
Fading level: 50
Fading level: 49
Fading level: 48
Fading level: 47
read: 0-0-3 s=1,c=1,t=3,pt=0,l=11,sg=0:40M Version
send: 3-3-0-0 s=1,c=1,t=3,pt=0,l=11,sg=0,st=ok:40M Version
New light level received: 40
Fading level: 46
Fading level: 45
Fading level: 44
Fading level: 43
Fading level: 42
Fading level: 41
Fading level: 40

      I hope it will be helpful

      1 Reply Last reply
      0
      • hekH Offline
        hekH Offline
        hek
        Admin
        wrote on last edited by
        #24

        It almost looks like Domoticz sends the "Version" stuff. Is it possible to see what Domoticz sends? Anot logs over there?

        1 Reply Last reply
        0
        • snowS Offline
          snowS Offline
          snow
          wrote on last edited by
          #25

          Output from RPi console. pi@domoticz ~/domoticz $ sudo ./domoticz -verbose 1

          2015-11-08 15:06:57.916  MySensors: connected to: 192.168.0.110:5003
2015-11-08 15:06:57.916  MySensors: Gateway Ready...
2015-11-08 15:06:58.917  MySensors: Gateway Version: 1.6.0-beta
2015-11-08 15:07:12.928  MySensors: Node: 3, Sketch Name: DimmableLED /w button
2015-11-08 15:07:13.932  MySensors: Node: 3, Sketch Version: 1.2
subtype       = AC
Sequence nbr  = 0
ID            = 0000003
Unit          = 1
Command       = On
2015-11-08 15:07:13.936  (MySensors) Lighting 2 (LED Dimmer)
subtype       = AC
Sequence nbr  = 0
ID            = 0000003
Unit          = 1
Command       = Set Level: 12
2015-11-08 15:07:32.010  (MySensors) Lighting 2 (LED Dimmer)
subtype       = AC
Sequence nbr  = 1
ID            = 0000003
Unit          = 1
Command       = Set Level: 11
2015-11-08 15:07:33.981  (MySensors) Lighting 2 (LED Dimmer)
subtype       = AC
Sequence nbr  = 2
ID            = 0000003
Unit          = 1
Command       = Set Level: 10
2015-11-08 15:07:35.984  (MySensors) Lighting 2 (LED Dimmer)
subtype       = AC
Sequence nbr  = 3
ID            = 0000003
Unit          = 1
Command       = Set Level: 9
2015-11-08 15:07:38.055  (MySensors) Lighting 2 (LED Dimmer)
subtype       = AC
Sequence nbr  = 4
ID            = 0000003
Unit          = 1
Command       = Set Level: 8

          I'll try to build Serial Gateway and do the same test

          1 Reply Last reply
          0
          • GizMoCuzG Offline
            GizMoCuzG Offline
            GizMoCuz
            wrote on last edited by
            #26

            There is a small problem with domoticz regarding the light level (fixed in beta #3563)
            When the slider was set to 100%, around 93% was send to the node

            BUT, what domoticz sends, is OK, there is NO version stuff added (really strange your seeing this!)

            I made a test sketch, and this is the output:

            Starting...
            send: 254-254-0-0 s=255,c=0,t=17,pt=0,l=10,sg=0,st=ok:1.6.0-beta
            send: 254-254-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
            read: 0-0-254 s=255,c=3,t=6,pt=0,l=1,sg=0:M
            send: 254-254-0-0 s=1,c=0,t=4,pt=0,l=0,sg=0,st=ok:
            send: 254-254-0-0 s=255,c=3,t=11,pt=0,l=21,sg=0,st=ok:DimmableLED /w button
            send: 254-254-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.2
            sensor started, id=254, parent=0, distance=1
            Ready to receive messages...
            read: 0-0-254 s=1,c=1,t=2,pt=0,l=1,sg=0:0
            send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0
            V_LIGHT received: 0
            read: 0-0-254 s=1,c=1,t=2,pt=0,l=1,sg=0:1
            send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:1
            V_LIGHT received: 1
            read: 0-0-254 s=1,c=1,t=3,pt=0,l=2,sg=0:43
            send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:43
            V_DIMMER received: 43
            read: 0-0-254 s=1,c=1,t=3,pt=0,l=2,sg=0:86
            send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:86
            V_DIMMER received: 86
            read: 0-0-254 s=1,c=1,t=3,pt=0,l=3,sg=0:100
            send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=3,sg=0,st=ok:100
            V_DIMMER received: 100

            All perfect

            Sketch:
            // Enable debug prints
            #define MY_DEBUG

            // Enable and select radio type attached
            #define MY_RADIO_NRF24
            //#define MY_RADIO_RFM69

            #define MY_NODE_ID 254

            #include <SPI.h>
            #include <MySensor.h>

            #define SN "DimmableLED /w button"
            #define SV "1.2"

            #define CHILD_ID_LIGHT 1

            MyMessage dimmerMsg(CHILD_ID_LIGHT, V_DIMMER);

            void setup()
            {
            Serial.println("Ready to receive messages...");
            }

            void presentation() {
            // Send the Sketch Version Information to the Gateway
            present(CHILD_ID_LIGHT, S_DIMMER);
            sendSketchInfo(SN, SV);
            }

            void loop()
            {
            }

            void receive(const MyMessage &message)
            {
            if (message.type == V_LIGHT) {
            Serial.print("V_LIGHT received: ");
            Serial.println(message.getString());
            } else if (message.type == V_DIMMER) {
            Serial.print("V_DIMMER received: ");
            Serial.println(message.getString());
            }
            else {
            Serial.print("Unhandled message received: ");
            Serial.println(message.getString());
            }
            }

            snowS 1 Reply Last reply
            0
            • hekH Offline
              hekH Offline
              hek
              Admin
              wrote on last edited by
              #27

              @GizMoCuz
              How do you terminate the strings in Domoticz? Only \n or both \n and \r?

              Does the controller have exactly the same behaviour when communicating with an ethernet gateway as serial gateway?

              1 Reply Last reply
              0
              • GizMoCuzG GizMoCuz

                There is a small problem with domoticz regarding the light level (fixed in beta #3563)
                When the slider was set to 100%, around 93% was send to the node

                BUT, what domoticz sends, is OK, there is NO version stuff added (really strange your seeing this!)

                I made a test sketch, and this is the output:

                Starting...
                send: 254-254-0-0 s=255,c=0,t=17,pt=0,l=10,sg=0,st=ok:1.6.0-beta
                send: 254-254-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
                read: 0-0-254 s=255,c=3,t=6,pt=0,l=1,sg=0:M
                send: 254-254-0-0 s=1,c=0,t=4,pt=0,l=0,sg=0,st=ok:
                send: 254-254-0-0 s=255,c=3,t=11,pt=0,l=21,sg=0,st=ok:DimmableLED /w button
                send: 254-254-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.2
                sensor started, id=254, parent=0, distance=1
                Ready to receive messages...
                read: 0-0-254 s=1,c=1,t=2,pt=0,l=1,sg=0:0
                send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0
                V_LIGHT received: 0
                read: 0-0-254 s=1,c=1,t=2,pt=0,l=1,sg=0:1
                send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:1
                V_LIGHT received: 1
                read: 0-0-254 s=1,c=1,t=3,pt=0,l=2,sg=0:43
                send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:43
                V_DIMMER received: 43
                read: 0-0-254 s=1,c=1,t=3,pt=0,l=2,sg=0:86
                send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:86
                V_DIMMER received: 86
                read: 0-0-254 s=1,c=1,t=3,pt=0,l=3,sg=0:100
                send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=3,sg=0,st=ok:100
                V_DIMMER received: 100

                All perfect

                Sketch:
                // Enable debug prints
                #define MY_DEBUG

                // Enable and select radio type attached
                #define MY_RADIO_NRF24
                //#define MY_RADIO_RFM69

                #define MY_NODE_ID 254

                #include <SPI.h>
                #include <MySensor.h>

                #define SN "DimmableLED /w button"
                #define SV "1.2"

                #define CHILD_ID_LIGHT 1

                MyMessage dimmerMsg(CHILD_ID_LIGHT, V_DIMMER);

                void setup()
                {
                Serial.println("Ready to receive messages...");
                }

                void presentation() {
                // Send the Sketch Version Information to the Gateway
                present(CHILD_ID_LIGHT, S_DIMMER);
                sendSketchInfo(SN, SV);
                }

                void loop()
                {
                }

                void receive(const MyMessage &message)
                {
                if (message.type == V_LIGHT) {
                Serial.print("V_LIGHT received: ");
                Serial.println(message.getString());
                } else if (message.type == V_DIMMER) {
                Serial.print("V_DIMMER received: ");
                Serial.println(message.getString());
                }
                else {
                Serial.print("Unhandled message received: ");
                Serial.println(message.getString());
                }
                }

                snowS Offline
                snowS Offline
                snow
                wrote on last edited by
                #28

                @GizMoCuz
                I have tested Your sketch and the same stuff is added at the end

                Starting...
send: 254-254-0-0 s=255,c=0,t=17,pt=0,l=10,sg=0,st=ok:1.6.0-beta
send: 254-254-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-254 s=255,c=3,t=6,pt=0,l=7,sg=0:Mersion
send: 254-254-0-0 s=1,c=0,t=4,pt=0,l=0,sg=0,st=ok:
send: 254-254-0-0 s=255,c=3,t=11,pt=0,l=21,sg=0,st=ok:DimmableLED /w button
send: 254-254-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.2
sensor started, id=254, parent=0, distance=1
Ready to receive messages...
read: 0-0-254 s=1,c=1,t=2,pt=0,l=1,sg=0:0
send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0
V_LIGHT received: 0
read: 0-0-254 s=1,c=1,t=2,pt=0,l=1,sg=0:1
send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:1
V_LIGHT received: 1
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:93Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:93Mersion
V_DIMMER received: 93Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:86Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:86Mersion
V_DIMMER received: 86Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:79Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:79Mersion
V_DIMMER received: 79Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:71Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:71Mersion
V_DIMMER received: 71Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:64Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:64Mersion
V_DIMMER received: 64Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:57Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:57Mersion
V_DIMMER received: 57Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:50Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:50Mersion
V_DIMMER received: 50Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:43Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:43Mersion
V_DIMMER received: 43Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:36Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:36Mersion
V_DIMMER received: 36Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:29Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:29Mersion
V_DIMMER received: 29Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:21Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:21Mersion
V_DIMMER received: 21Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:14Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:14Mersion
V_DIMMER received: 14Mersion
read: 0-0-254 s=1,c=1,t=3,pt=0,l=9,sg=0:74Mersion
send: 254-254-0-0 s=1,c=1,t=3,pt=0,l=9,sg=0,st=ok:74Mersion
V_DIMMER received: 74Mersion
read: 0-0-254 s=1,c=1,t=2,pt=0,l=9,sg=0:04Mersion
send: 254-254-0-0 s=1,c=1,t=2,pt=0,l=9,sg=0,st=ok:04Mersion
V_LIGHT received: 04Mersion

                Is it possible as some crap is sitting in my ESP8266 EEPROM memory?

                1 Reply Last reply
                0
                • GizMoCuzG Offline
                  GizMoCuzG Offline
                  GizMoCuz
                  wrote on last edited by GizMoCuz
                  #29

                  @hek, with \n
                  MySensors is implemented in domoticz for a long time now... there should be nothing wrong with it.....

                  Also in my sketches all is received perfectly

                  Could there be a difference between the ESP8266 and nRF ?
                  I only use the nRF currently (and probably will for ever as i have 20 more chips and a lot more arduino's g)

                  Also i do not send anything with the word version in it, it looks this is a left over from sending the sketch information ?

                  I dont know how you guys get that nice colors in the log (brown/white/green), but the green number is OK, that white behind it is not

                  1 Reply Last reply
                  0
                  • GizMoCuzG Offline
                    GizMoCuzG Offline
                    GizMoCuz
                    wrote on last edited by
                    #30

                    @hek, as demonstrated with the new V_CUSTOM, there is send a lot of information from domoticz -> node, and all prints well, so maybe thats a confirm that this part is working OK (at least on the nRF024)

                    1 Reply Last reply
                    0
                    • GizMoCuzG Offline
                      GizMoCuzG Offline
                      GizMoCuz
                      wrote on last edited by
                      #31

                      I also find it strange that at the beginning V_LIGHT correctly displays 0 or 1, and at the end 04 ? (0 = OK)

                      1 Reply Last reply
                      0
                      • snowS Offline
                        snowS Offline
                        snow
                        wrote on last edited by
                        #32

                        I made a Serial Gateway and updated Domoticz to latest beta, and this is the output from the same sensor.

                        0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=1,sg=0,st=ok:7
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=1,sg=0:7
2;1;1;1;3;7
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:14
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:14
2;1;1;1;3;14
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:21
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:21
2;1;1;1;3;21
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:29
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:29
2;1;1;1;3;29
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:36
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:36
2;1;1;1;3;36
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:43
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:43
2;1;1;1;3;43
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:50
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:50
2;1;1;1;3;50
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:57
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:57
2;1;1;1;3;57
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:64
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:64
2;1;1;1;3;64
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:71
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:71
2;1;1;1;3;71
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:79
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:79
2;1;1;1;3;79
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:86
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:86
2;1;1;1;3;86
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:93
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:93
2;1;1;1;3;93
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=3,sg=0,st=ok:100
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=3,sg=0:100
2;1;1;1;3;100

                        All OK

                        1 Reply Last reply
                        0
                        • hekH Offline
                          hekH Offline
                          hek
                          Admin
                          wrote on last edited by
                          #33

                          @snow

                          Could you try replacing this in MySensors/core/MyGatewayTransportEthernet.cpp

                          bool _readFromClient(uint8_t i) {
	while (clients[i].connected() && clients[i].available()) {
		char inChar = clients[i].read();
		if (inputString[i].idx < MY_GATEWAY_MAX_RECEIVE_LENGTH - 1) {
			// if newline then command is complete
			if (inChar == '\n') {
				// a command was issued by the client
				// we will now try to send it to the actuator
				// echo the string to the serial port
				debug(PSTR("Client %d: %s\n"), i, inputString[i].string);

				// add string terminator and clear the string:
				inputString[i].string[inputString[i].idx] = 0;
				inputString[i].idx = 0;
				bool ret = protocolParse(_ethernetMsg, inputString[i].string);
				if (ret) {
					return ret;
				}

			} else {
				// add it to the inputString:
				inputString[i].string[inputString[i].idx++] = inChar;
			}
		} else {
			// Incoming message too long. Throw away
			debug(PSTR("Client %d: Message too long\n"), i);
			inputString[i].idx = 0;
			// Finished with this client's message. Next loop() we'll see if there's more to read.
			break;
		}
	}
	return false;
}

                          And let me know how it behaves.

                          1 Reply Last reply
                          0
                          • GizMoCuzG Offline
                            GizMoCuzG Offline
                            GizMoCuz
                            wrote on last edited by
                            #34

                            I think that will solve the issue... @snow, waiting patiently for your reply ;)

                            1 Reply Last reply
                            0
                            • snowS Offline
                              snowS Offline
                              snow
                              wrote on last edited by
                              #35

                              It's much better now. I can control dimmer from the domoticz. :)

                              0;0;3;0;9;Client 0 connected
0;0;3;0;9;Client 0: 0;0;3;0;2;Get Version
0;0;3;0;2;Get Version
0;0;3;0;9;read: 2-2-0 s=255,c=0,t=17,pt=0,l=10,sg=0:1.6.0-beta
0;0;3;0;9;read: 2-2-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
0;0;3;0;9;Client 0: 2;255;3;0;6;M Version
2;255;3;0;6;M
0;0;3;0;9;send: 0-0-2-2 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
0;0;3;0;9;read: 2-2-0 s=1,c=0,t=4,pt=0,l=0,sg=0:
0;0;3;0;9;read: 2-2-0 s=255,c=3,t=11,pt=0,l=21,sg=0:DimmableLED /w bu
0;0;3;0;9;read: 2-2-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.2
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=1,l=1,sg=0:100
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=1,l=1,sg=0,st=ok:100
0;0;3;0;9;Client 0: 2;1;1;1;3;93M
2;1;1;1;3;93
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:93
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:93
0;0;3;0;9;Client 0: 2;1;1;1;3;86
2;1;1;1;3;86
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:86
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:86
0;0;3;0;9;Client 0: 2;1;1;1;3;79
2;1;1;1;3;79
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:79
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:79
0;0;3;0;9;Client 0: 2;1;1;1;3;71
2;1;1;1;3;71
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:71
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:71
0;0;3;0;9;Client 0: 2;1;1;1;3;64
2;1;1;1;3;64
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:64
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:64
0;0;3;0;9;Client 0: 2;1;1;1;3;57
2;1;1;1;3;57
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:57
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:57
0;0;3;0;9;Client 0: 2;1;1;1;3;50
2;1;1;1;3;50
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:50
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:50
0;0;3;0;9;Client 0: 2;1;1;1;3;43
2;1;1;1;3;43
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:43
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:43
0;0;3;0;9;Client 0: 2;1;1;1;3;36
2;1;1;1;3;36
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:36
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:36
0;0;3;0;9;Client 0: 2;1;1;1;3;36
2;1;1;1;3;36
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:36
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:36
0;0;3;0;9;Client 0: 2;1;1;1;3;29
2;1;1;1;3;29
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:29
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:29
0;0;3;0;9;Client 0: 2;1;1;1;3;21
2;1;1;1;3;21
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:21
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:21
0;0;3;0;9;Client 0: 2;1;1;1;3;14
2;1;1;1;3;14
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=2,sg=0,st=ok:14
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=2,sg=0:14
0;0;3;0;9;Client 0: 2;1;1;1;3;74
2;1;1;1;3;7
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=0,l=1,sg=0,st=ok:7
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=0,l=1,sg=0:7
0;0;3;0;9;Client 0: 2;1;1;1;2;0
2;1;1;1;2;0
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=2,pt=0,l=1,sg=0,st=ok:0
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=2,pt=0,l=1,sg=0:0
0;0;3;0;9;read: 2-2-0 s=1,c=1,t=3,pt=2,l=2,sg=0:0
0;0;3;0;9;send: 0-0-2-2 s=1,c=1,t=3,pt=2,l=2,sg=0,st=ok:0
                              1 Reply Last reply
                              0
                              • hekH Offline
                                hekH Offline
                                hek
                                Admin
                                wrote on last edited by
                                #36

                                Great, I'll push this fix ASAP.

                                1 Reply Last reply
                                0
                                • HoffanH Offline
                                  HoffanH Offline
                                  Hoffan
                                  wrote on last edited by
                                  #37

                                  @Hoffan said:
                                  anyone that knows if include button working now? With vera as controller

                                  1 Reply Last reply
                                  0
                                  • HoffanH Offline
                                    HoffanH Offline
                                    Hoffan
                                    wrote on last edited by
                                    #38

                                    I can answer that question by my self.. Its still not working

                                    1 Reply Last reply
                                    0
                                    • hekH Offline
                                      hekH Offline
                                      hek
                                      Admin
                                      wrote on last edited by
                                      #39

                                      @Hoffan, I verified the inclusion button functionality in the dev branch during the weekend (at least on AtMega but it should work fine on ESP as well).

                                      Just make sure to enable the feature and set a valid ESP-pin. All is documented in sketch.

                                      1 Reply Last reply
                                      0
                                      • HoffanH Offline
                                        HoffanH Offline
                                        Hoffan
                                        wrote on last edited by
                                        #40

                                        @hek

                                        Okey So i must enable it in the sketch even if i only use the start button in the GUI in Vera

                                        1 Reply Last reply
                                        0
                                        • hekH Offline
                                          hekH Offline
                                          hek
                                          Admin
                                          wrote on last edited by
                                          #41

                                          @Hoffan
                                          Not the "button" feature (unless you use it), but the "inclusion mode" feature must be enabled.

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes

                                          10

                                          Online

                                          11.7k

                                          Users

                                          11.2k

                                          Topics

                                          113.1k

                                          Posts


                                          Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                          • Login
                                          • Don't have an account? Register
                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • MySensors
                                          • OpenHardware.io
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular