'Bad byte' error

[martinhjelmare]

@fleshfear

pip3 install pyserial==2.5

[A Former User]

now i have 2.5. But still no luck. What to do.

[A Former User]

now i allso have this in my log

16-03-12 19:45:33 mysensors.mysensors: Error decoding message from gateway, probably received partial data before connection was complete.

[martinhjelmare]

@fleshfear

Nothing else is accessing the serial port?

[A Former User]

no that i know of. Its a virtual machine dedicated to only ha. And i have just testet if it was the virtual enviroment there was to blame. But on indigo domistic the plugin for mysensors works and can talk to the gateway.

Im i missing something else like pyserial or?

Is the only thing needed ha and pyserial?

[martinhjelmare]

Have you rebooted the machine after installing pyserial 2.5?

You can also check that there's no remains of other pyserial versions where the python packages are installed on your machine.

What distribution are you running?

[A Former User]

yep have rebooted, many times after that.

How do i check if there are any other version installed? I could not install pyserial just like you said, i had to run a

pip3 uninstall pyserial

first.

it' a ubuntu 15.10

[martinhjelmare]

Python library files on Ubuntu are usually found in:

/usr/local/lib/pythonX.X/site-packages

[A Former User]

ls -la /usr/local/lib/python3.4/dist-packages/
homeassistant/                  MarkupSafe-0.23.egg-info/       pytz-2015.7.dist-info/          vincenty/
homeassistant-0.15.0.dist-info/ pip/                            PyYAML-3.11.egg-info/           vincenty-0.1.3.egg-info/
jinja2/                         pip-8.1.0.dist-info/            requests/                       yaml/
Jinja2-2.8.dist-info/           pyserial_py3k-2.5.egg-info/     requests-2.9.1.dist-info/       
markupsafe/                     pytz/                           serial/  

[A Former User]

also don't know if, it is related.

but i had this in the configuration:

persistence_file: 'mysensors.json'

But every time i started the HA, the log said it couldnt find the file. But efter i removed it, and create the new file i couldnt find. the new log have this:

16-03-12 22:26:47 homeassistant.bootstrap: Error during setup of component mysensors
Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/bootstrap.py", line 105, in _setup_component
    if not component.setup(hass, config):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 111, in setup
    port, persistence, persistence_file, version, baud_rate)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 75, in setup_gateway
    baud=baud_rate)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 277, in __init__
    persistence_file, protocol_version)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 32, in __init__
    self._load_sensors()
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 162, in _load_sensors
    self._perform_file_action(self.persistence_file, 'load')
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 177, in _perform_file_action
    func(filename)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 133, in _load_pickle
    self.sensors = pickle.load(file_handle)
EOFError: Ran out of input

[A Former User]

the new config looks like this

mysensors:
  gateways:
    - port: '/dev/ttyUSB0'
      baud_rate: 38400
  debug: true
  persistence: true
  version: '1.5'
  optimistic: true

[martinhjelmare]

Which arduino model are you using for the gateway?

[A Former User]

Its a nano.

[martinhjelmare]

Did you change baudrate in MyConfig.h to 38400? Otherwise I think we've found the problem.

Nano can use the default 115200 baudrate in MyConfig.h. The baudrate in HA config has to match. You can remove that line and hass will default to 115200.

[A Former User]

no i haven't, so i have just removed the line, and restarted HA.
But no luck. im still getting this.

Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/bootstrap.py", line 105, in _setup_component
    if not component.setup(hass, config):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 111, in setup
    port, persistence, persistence_file, version, baud_rate)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 75, in setup_gateway
    baud=baud_rate)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 277, in __init__
    persistence_file, protocol_version)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 32, in __init__
    self._load_sensors()
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 162, in _load_sensors
    self._perform_file_action(self.persistence_file, 'load')
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 177, in _perform_file_action
    func(filename)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 133, in _load_pickle
    self.sensors = pickle.load(file_handle)
EOFError: Ran out of input

[A Former User]

okay putting

persistence_file: 'mysensors.json'

Will get the gateway started. but will result in a file not found. if i put the correct path in like

persistence_file: '/var/opt/homeassistant/mysensors.json'

i get this in the log.

16-03-13 02:11:26 homeassistant.bootstrap: Error during setup of component mysensors
Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/bootstrap.py", line 105, in _setup_component
    if not component.setup(hass, config):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 111, in setup
    port, persistence, persistence_file, version, baud_rate)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 75, in setup_gateway
    baud=baud_rate)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 277, in __init__
    persistence_file, protocol_version)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 32, in __init__
    self._load_sensors()
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 162, in _load_sensors
    self._perform_file_action(self.persistence_file, 'load')
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 177, in _perform_file_action
    func(filename)
  File "/var/opt/homeassistant/lib/mysensors/mysensors.py", line 145, in _load_json
    self.sensors = json.load(file_handle, cls=MySensorsJSONDecoder)
  File "/usr/lib/python3.4/json/__init__.py", line 268, in load
    parse_constant=parse_constant, object_pairs_hook=object_pairs_hook, **kw)
  File "/usr/lib/python3.4/json/__init__.py", line 331, in loads
    return cls(**kw).decode(s)
  File "/usr/lib/python3.4/json/decoder.py", line 343, in decode
    obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python3.4/json/decoder.py", line 361, in raw_decode
    raise ValueError(errmsg("Expecting value", s, err.value)) from None
ValueError: Expecting value: line 1 column 1 (char 0)

[martinhjelmare]

If you check the content of

/var/opt/homeassistant

What does it show?

[A Former User]

That's where all my configuration is. And there is a mysensors.json file present.

[martinhjelmare]

Try deleting the json file and have the full path to the json file in the config, as before. Restart hass.

Edit: Also delete any pickle files, if any.

[A Former User]

full path and no file, gets me

File does not exist or is not readable: /var/opt/homeassistant/mysensors.json

but will get me a gateway started.