Air Quality Sensor

[epierre]

This post is deleted!

[epierre]

This post is deleted!

[epierre]

@hek about initial calibration, how would I do check if there is a value in the eeprom or not, and if not run an initial calibration ?

[hek]

@epierre

Unwritten eeprom has the value 0xff.

[Omemanti]

Hi,
First of al I'm a novice in all of this. I can read some code but the whole arduino thing is new to me.

I tried to get the MQ135 working on my uno with tearing apart the : https://github.com/empierre/arduino/blob/master/1.3/MQ135dgi.ino.
I tried to pull out the bits and parts to get a accurate reading on my serial monitor.

It sometimes read 1 or 2, but most of the time it is 0.
Can it have something to do with it being mounted on its own PCB? (I ordered the one suggested in the store..)
Can someone help me out?

Groetjes Mark

[epierre]

@Omemanti hello have you plugged it on the right pins, this is an analogic sensor to be plugged on A0, with 5V and GND pins. Don't wire the digital one, useless...

My minimal value is 53.. so not 0 or 1 hwich looks more like the digital output ;-)

[Omemanti]

should be alright right?

[epierre]

@Omemanti cabling is correct

[korttoma]

Hi,
Where can I find AirQuality1.xml?? (or all files related to this device if there are others then the .xml)

01 09/03/14 13:46:53.685 ctrl_chr[31;1mDevice_LuaUPnP::LoadDeviceDoc can't load /etc/cmh-lu//D_AirQuality1.xmlctrl_chr[0m <0x2acc9000>
02 09/03/14 13:46:53.686 ctrl_chr[33;1mJobHandler_LuaUPnP::m_sMissingFile_set /etc/cmh-lu//D_AirQuality1.xmlctrl_chr[0m <0x2acc9000>

Seems like if this file is missing it brakes the whole MySensors plugin.
All devices related to MySensors plugin are blank and nothing seems to update.
Deleting the device that use AirQuality.xml will make the rest work again.

Help!!

[hek]

@korttoma

Unfortunately no one has created it :(

[korttoma]

@hek
ahh, that's why I cant find it... no pressure from my side to get one done but maybe we should mention this little detail on the MySensors building page just as a heads up for others since there is a sketch published and all...

[epierre]

I made a template but I'm unable to test it...

[epierre]

@hek here is an updated list from the Wunder Weather list of reportable gases:

Carbon Monoxide – CO
Carbon Dioxide – CO2
Oxygen – O2
Methane – CH4
Hydrogen – H2
Ammonia – NH3
Isobutane – C4H10
Ethanol – CH3CH2OH (aka C2H5OH or C2H60)
Toluene – C6H5CH3
Hydrogen Sulfide – H2S
Nitrogen Dioxide – NO2
Ozone – O3
Hydrocarbons – VOC
Chlorine CL2
Ammonium NH4
Ethanol CO2H50H
Methyl CH3
Acetone CH3_2CO
LPG (both C3H8 C4H10)

• NO - nitric oxide
• NOX - nitrogen oxides
• NO3 ion (nitrate, not adjusted for ammonium ion) UG/M3
• SO4 ion, sulfate, not adjusted for ammonium ion, UG/M3
• SO2 sulfur dioxide, ppb
• EC (elemental carbon) – PM2.5 UG/M3
• OC (organic carbon, not adjusted for oxygen and hydrogen) – PM2.5 UG/M3
• BC (black carbon at 880 nm) UG/M3
• UV-AETH (second channel of Aethalometer at 370 nm) UG/M3
• PM2.5 mass - UG/M3
• PM10 mass - PM10 mass

[hek]

Thanks!

Still thinking about you gas_type suggestion. It would introduce another level of device types. Hmm..

[epierre]

@korttoma look above to S_CO2Sensor.json D_CO2Sensor.xml D_CO2Sensor.json, if you can test it...

[epierre]

@Yveaux I know you are strong at finding datasheet... can you find one for me ? I can't find the 2SH12 sensor altgough I've asked for it to all suppliers on aliexpress...

Same for theWSP1110

[Yveaux]

@epierre Couldn't find it either, sorry...
I wouldn't buy a $52,- component without a datasheet, if I were you...

[epierre]

@Yveaux When I asked for the WSP110 they sent me only this (not the same for this one is HCHO and well documented...) :

[hek]

@epierre

I wonder what the green curve represents :confused:

[epierre]

@hek that should be the more sensitive, and since it is given mostly for CHCO I guess this is it... (Formaldehyde)