Error decoding message from gateway, probably received bad byte.
-
Hello everyone,
I wanted to implement MySensors with HASS as a students project. I already have it running at home and it works flawlessly. But now I cannot overcome the following error:
mysensors.mysensors: Error decoding message from gateway, probably received bad byte.I've never had such an error before. I tried using the combination of Arduino-Gateway and Arduino-DHT22 AND I also tried to have both on the same Arduino (both ways worked with my sketches at home).
I also tried to install pyserial 2.5 as it was stated in another thread. :/
Do you guys have any idea what else I could try?
-
Hi!
What arduino are you using as gateway? How have you configured the mysensors component in home assistant?
So at home a similar setup is working together with home assistant, but at school it doesn't? What's the difference between the two environments, hardware and software -wise?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login