Software

[sundberg84]

@vanathi - this is a forum for MySensors and not z-wave. I suggest you ask in a homeautomation forum for the right protocol. Perhaps for the controller you intend to use. Ie, if you are going to use Domoticz, ask at Domoticz forum.

[vanathi]

@sundberg84 Domoticz uses Linux know

[vanathi]

@sundberg84 I thought to install the Domoticz Linux software into Odroid C1+. Is it possible sir..?

[sundberg84]

@vanathi - Sorry, I dont know. You are in the wrong forum.
Go ask at www.domoticz.com/forum if you want to use that controller.

[vanathi]

@sundberg84 Okay.Thank you sir

[gohan]

Well, Linux and domoticz are working on raspberry pi so I would expect to work also on that system.

[vanathi]

@gohan thank you gohan.
Domoticz provides a Linux-based software know. May I install that to odroid C1+ and make them communicate with devices through Z wave stick.
Is it possible sir..?

[gohan]

I theory I would say yes, but you will have to find out by trying or ask in domoticz and odroid forum which Linux distribution is better

[vanathi]

Okay. I wil check with that.

[vanathi]

There anybody...?
I want to know any hardware module which supports my windows application software.
Please suggest me if anything u know...

[gohan]

What windows application are you referring to?

[vanathi]

@gohan Thank you for your response Mr.Gohan.
I wanna install comfortclick window based OS into that hardware module i.e Single Board Computer.

[gohan]

@vanathi said in Software:

comfortclick

Any mini computer will probably be enough to run that application, just pic one with windows 10 support but it is totally off topic on this forum.

[vanathi]

@gohan ya i just asked as a help and want you to suggest any SBC which supports my application software

[gohan]

I got that, I am just saying that there are more specialized forum on hardware for your needs.

[vanathi]

@gohan Really i don't know those links ..that's why asking help to you