Irrigation Controller (up to 16 valves with Shift Registers)

tombstone

It's really hard to work out what's good post over bad post. Lol

tombstone

Its my 1st project and I have learnt alot but have got myself a snag and I am getting this....

Arduino: 1.8.3 (Windows 10), Board: "Arduino Pro or Pro Mini, ATmega328 (5V, 16 MHz)"

C:\Users\HTPC\Documents\Arduino\Irrigation_Controller_1\Irrigation_Controller_1..ino:82:21: fatal error: TimeLib.h: No such file or directory

#include <TimeLib.h>

compilation terminated.

exit status 1
Error compiling for board Arduino Pro or Pro Mini.

gohan

go to library manager and install Time library

tombstone

This post is deleted!

tombstone

This post is deleted!

tombstone

This post is deleted!

tombstone

This post is deleted!

tombstone

ok I almost there :-D but my pro mini has just Analog 1 to 3. I say I have to change the coda were abouts...
I also have not setup up my Vera Controller as I see you have to pay...

Is there another one that is eazy as I have try some but can not get it to work. eg HomeGenie is download and on my pc but don't think its not to good. don't know how to find my pro mini. happy to chagaen to someing eazer to get me started thanks guys....

tombstone

Domoticz LOOKS :-D GOOD
BUT new to all this :-D

Black Cat

If you are looking for Software, try openhab.

You need to buy Vera, but the software is free.

tombstone

@Black-Cat thanks 😁

tombstone

ok so when adding to Domoticz..
I go to hardware...
I name is..... test...
then choose.. MySensors Gateway with LAN interface....
Data Timeout: .... Disabled.....
Remote Address.... (I have tryed)....

IP Address, Subnet Mask, Default Gateway, Primary DNS, Secondary DNS.

(i try everythinbg I can think of and still not work)

Port: ... 5003
My pro min has the red light on and blink blue occassionally.

what I get from the Domoticz log is



2017-07-30 18:00:00.627 Error: MySensors: Can not connect to: 61.9.211.33:5003
2017-07-30 18:00:00.627 TCP: Connection problem (Unable to connect to specified IP/Port)
2017-07-30 18:00:00.627 TCP: Reconnecting in 30 seconds...
'''

tbowmo

@tombstone

What hardware are you using for the gateway? Arduino, Sensebender GW, ESP8266, is it wired or wireless?

Does it get an IP address from your router?

Can you successfully telnet to the above IP address on port 5003? (And what is the output)

Does the gateway send any logs to the serial port? If yes, then post them on the forum.

tombstone

@tbowmo
The hardware I'am using for the gateway is the Arduino pro mini and its wireless from the NRF24L01+ 2.4GHz Wireless Transceiver

I don't know if it is getting IP address from my router.

have not use telnet before (I have just youtube it and enabled it... all what i got from youtube was that you can send email lol cool)

Does the gateway send any logs to the serial port? If yes, then post them on the forum. (were do I get them logs the ones from Domoticz and below but not much info to go on)

Thanks :-D

tbowmo

@tombstone

How is the promini connected to the device runnning domoticz?

To me it sounds like that you have the promini connected directly to your computer where domoticz is running, then you should add it as a serial gateway, and not ethernet gateway

If you haven't already done this, I suggest that you read about the mysensors network so you have a basic understanding on how mysensors works.

tombstone

@tbowmo
I have it runing both ways but with serial gateway there no errors but when going to setup there is no NODES.

2017-07-30 19:20:55.764 TCP: Connection problem (Unable to connect to specified IP/Port)
2017-07-30 19:20:55.766 TCP: Reconnecting in 30 seconds...
2017-07-30 19:21:26.035 TCP: Reconnecting...
2017-07-30 19:21:37.093 MySensors: TCP/IP Worker stopped...
2017-07-30 19:27:03.150 MySensors: Using serial port: COM4

tombstone

@tombstone

//#define MY_NODE_ID 1  // Set this to fix your Radio ID or use Auto

IS there someing I have missed with adding NODES???

tombstone

0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.1.1
3 TSM:INIT
4 TSF:WUR:MS=0
11 TSM:INIT:TSP OK
13 TSM:FPAR
15 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2022 !TSM:FPAR:NO REPLY
2024 TSM:FPAR
2026 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4034 !TSM:FPAR:NO REPLY
4036 TSM:FPAR
4038 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6046 !TSM:FPAR:NO REPLY
6048 TSM:FPAR
6050 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8058 !TSM:FPAR:FAIL
8059 TSM:FAIL:CNT=1
8061 TSM:FAIL:PDT
18065 TSM:FAIL:RE-INIT
18067 TSM:INIT
18074 TSM:INIT:TSP OK
18076 TSM:FPAR
18078 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20086 !TSM:FPAR:NO REPLY
20088 TSM:FPAR
20090 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22099 !TSM:FPAR:NO REPLY
22102 TSM:FPAR
22104 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
24112 !TSM:FPAR:NO REPLY
24114 TSM:FPAR
24116 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26124 !TSM:FPAR:FAIL
26125 TSM:FAIL:CNT=2
26127 TSM:FAIL:PDT
36130 TSM:FAIL:RE-INIT
36132 TSM:INIT
36140 TSM:INIT:TSP OK
36142 TSM:FPAR
36144 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
38152 !TSM:FPAR:NO REPLY
38154 TSM:FPAR
38156 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
40164 !TSM:FPAR:NO REPLY
40166 TSM:FPAR
40168 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
42176 !TSM:FPAR:NO REPLY
42178 TSM:FPAR
42180 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
44188 !TSM:FPAR:FAIL
44189 TSM:FAIL:CNT=3
44191 TSM:FAIL:PDT
54194 TSM:FAIL:RE-INIT
54196 TSM:INIT
54203 TSM:INIT:TSP OK
54205 TSM:FPAR
54207 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
56215 !TSM:FPAR:NO REPLY
56217 TSM:FPAR
56219 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
58227 !TSM:FPAR:NO REPLY
58229 TSM:FPAR
58231 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
60239 !TSM:FPAR:NO REPLY
60241 TSM:FPAR
60243 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
62252 !TSM:FPAR:FAIL
62254 TSM:FAIL:CNT=4
62255 TSM:FAIL:PDT
72258 TSM:FAIL:RE-INIT
72260 TSM:INIT
72267 TSM:INIT:TSP OK
72269 TSM:FPAR
72271 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
74280 !TSM:FPAR:NO REPLY
74283 TSM:FPAR
74285 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
76293 !TSM:FPAR:NO REPLY
76295 TSM:FPAR
76297 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
78305 !TSM:FPAR:NO REPLY
78307 TSM:FPAR
78309 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
80317 !TSM:FPAR:FAIL
80318 TSM:FAIL:CNT=5
80320 TSM:FAIL:PDT
90323 TSM:FAIL:RE-INIT
90326 TSM:INIT
90333 TSM:INIT:TSP OK
90335 TSM:FPAR
90337 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
92345 !TSM:FPAR:NO REPLY
92347 TSM:FPAR
92349 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
94357 !TSM:FPAR:NO REPLY
94359 TSM:FPAR
94361 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
96369 !TSM:FPAR:NO REPLY
96371 TSM:FPAR
96373 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
98381 !TSM:FPAR:FAIL
98383 TSM:FAIL:CNT=6
98384 TSM:FAIL:PDT
108387 TSM:FAIL:RE-INIT
108389 TSM:INIT
108396 TSM:INIT:TSP OK
108398 TSM:FPAR
108401 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
110408 !TSM:FPAR:NO REPLY
110410 TSM:FPAR
110413 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
112420 !TSM:FPAR:NO REPLY
112422 TSM:FPAR
112425 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
114433 !TSM:FPAR:NO REPLY
114435 TSM:FPAR
114438 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
116445 !TSM:FPAR:FAIL
116447 TSM:FAIL:CNT=7
116449 TSM:FAIL:PDT

This is my debug log. will like to know if there some thing I missed as I learning thanks :+1:

tbowmo

@tombstone

Just to be sure, you have one pro mini with NRF24 working as a gateway, connected to your computer?

And then you have one (or more) pro minis also with NRF24, acting as nodes?

gohan

@tombstone said in Irrigation Controller (up to 16 valves with Shift Registers):

@tombstone
//#define MY_NODE_ID 1  // Set this to fix your Radio ID or use Auto
IS there someing I have missed with adding NODES???

yuo need to uncomment that line

Irrigation Controller (up to 16 valves with Shift Registers)

14

11.7k

11.2k

113.1k