What did you build today (Pictures) ?

[rozpruwacz]

@scalpel yeah, I did this kind of project also and I wonder if there is a software for that It would be fun to be able to set the wakeup ir code from the linux os, with for example i2c or 1-wire interface.

[gohan]

@rozpruwacz how often would you need to change the IR code for that?

[rozpruwacz]

rarely, but still it would be fun to make such thing

[dakipro]

@sincze said in What did you build today (Pictures) ?:

her favourite radio channel at her prefer

@sincze hi, could you elaborate a bit more the TV messages, do you have any link with more info? Was that the LG tv with Mqtt that was mentioned on the forum?(or I mixed forums)

[sincze]

@dakipro we use kodi on al lgl tvs. The libreelec TV box has cec and can turn on the TV via hdmi. If TV is on I am able to control the volume via the LG webserver. Kodi (api) can display the notifications for Me :). Not that fancy but it works like a charm.

[wallyllama]

Side note. I did a quick search, there is a cec library for arduino!
https://github.com/stefslon/cec-arduino

[bjacobse]

@sincze
If it works like a charm - it's fancy

[sundberg84]

Back to topic! Last night I made some changes to my ATX Power supply because the variable settings was to sensitive:

[zboblamont]

@sundberg84 Did you find that taking the cover off improved the accuracy at all ?

[maghac]

I built a lithophane lamp for my grandson. The electronics is basically only a pro mini and 36 neopixels. Sadly this version is not mysensorized but maybe I'll do that in version 2

[NeverDie]

@maghac Cool. How were you able to convert the photos into that embossed material (or whatever it is)? Is that a CNC process, or something else? It seems to have very good resolution.

[gohan]

I have seen a video where you can convert your pictures and print them using a 3D printer

[maghac]

@gohan said in What did you build today (Pictures) ?:

I have seen a video where you can convert your pictures and print them using a 3D printer

Correct, these are 3D printed lithophanes (https://en.wikipedia.org/wiki/Lithophane). I used http://3dp.rocks/lithophane/ to convert jpg files to STL files for printing.

[Nca78]

After failing to assemble a completely functional version of my new livolo switch board, I assembled a first prototype of my new "22" sensor board. Unfortunately I didn't receive the sensors yet so it only has a switch, a hall sensor for door and a led, but that's enough for the first testing.
Board is made to cut headers when it will be finished, but meanwhile I can use the headers to make it a breakout board for the nrf51 module or for each of the sensors.

[scalz]

@Nca78 nice it looks like familiar to me, i don't know why I agree with you, I prefer rounded square shape as it fits more easily everywhere than circles

[NeverDie]

Have you settled yet on what kind of connector you're going to use on future boards?

[Nca78]

@scalz said in What did you build today (Pictures) ?:

@Nca78 nice it looks like familiar to me, i don't know why

Not sure which one you're talking about, as it's some kind of child between @NeverDie 's board (same nrf51 module and small size) and your aeos (shape, on board sensors). But it's more like a challenge to me, make the smallest board possible (22*22mm) with as many sensors as possible (at the moment, door, TH, light, accelerometer) and I have a bit of margin to add more like the leak detection from @NeverDie it's really nice to be able to do it with such a tiny sensor.
I'll do a more complete and flexible 33 board later, I will try to make it some kind of a hand-solderable version of aeos

[NeverDie]

As far as minimizing size goes, I think you're right: square (or some kind of rectangle) is going to be better. I end up throwing away a lot of useable space going from square to circle, which, unfortunately, forced me into increasing the diameter (i.e. the size). So, in the end, square/rectangular is probably better. I think the allure of the circle is to try to fit the whole thing perfectly onto a coincell (which acts as a kind of limit on how small you can ultimately go), but unfortunately that can't happen with any of the coincell holders I've seen so far....

[scalz]

@Nca78
It was just a private joke If I inspire some people, then I'm glad! Because like you said, aeos is different (better mcu, more ios&sensors, and latest unpublished revision is..more generous).

But, if you're trying to make a "aeos" (same sensors for instance) in future, then i don't get the point..why reinventing the wheel? Your board has qfn/dfn footprints too, so I don't see how it's easier to handsolder.
If this is related to Ic's price, there are lot of different ways to get them cheaper.

You should maybe use stencils (maybe you already do it) that will save your day

Keep the good work

@NeverDie yep, agree with you

[NeverDie]

@scalz We're not going to get much software being written (such as, for instance, an OTA booloader that we can all use or cool self-destructing crypto wizardy) until there's worthwhile nRF5 hardware available, so anything you can do to speed up the release of your designs would really help. I've been trying to Johnny Appleseed this, without getting much apparent traction on people adopting it. People seem to like your stuff, which looks very professional. If you can, try to make it available so people can start writing software, integrating it, etc. As the saying goes, a rising tide lifts all boats.

[gohan]

@NeverDie said in What did you build today (Pictures) ?:

I've been trying to Johnny Appleseed this,

What have you been trying to do?

[NeverDie]

@gohan said in What did you build today (Pictures) ?:

@NeverDie said in What did you build today (Pictures) ?:

I've been trying to Johnny Appleseed this,

What have you been trying to do?

I posted a lot of nRF5 PCB's hoping that others would find some appealing and jump on the nRF5 bandwagon, but so far not much seems to have happened. Aside from some helpful feedback/suggestions from @nca78, I'm not really any better off than if I hadn't bothered. I'm not sure what motivates other PCB posters, but the feedback/suggestions have been the only real payoff for me. Unfortunately, most PCB postings have garnered zero, even if there appear to have been a lot of downloads.

[Yveaux]

@NeverDie @scalz To get the nRF5 series adopted by MySensors and its users I think we should start with a single board. We have to make sure it is easy to obtain/replicate (by using a ready available module, or using a hardware partner where people can just order the board) and supply the required getting started docs.
I really appreciate all the work done on the nRF5 support, but now we have to take the leap from prototype to 'production' to get it adopted by the community.

[gohan]

@Yveaux agreed
@NeverDie don't let you down, not everybody knows how to design PCBs or provide suggestions in that matter.

[NeverDie]

@Yveaux said in What did you build today (Pictures) ?:

@NeverDie @scalz To get the nRF5 series adopted by MySensors and its users I think we should start with a single board.

I think that's a good idea. A standardized reference platform would really help in building some forward momentum. How about you start a thread saying exactly what it is that you'd want the board to be like, and maybe it will gather some consensus and someone will make it. Like I say, I've launched numerous trial balloons, and it's just not an efficient way to get there from here. My guess is it will be some kind of multi-sensor board, maybe even the same as what @scalz and/or @nca78 are already doing.

[Nca78]

@scalz said in What did you build today (Pictures) ?:

@Nca78
But, if you're trying to make a "aeos" (same sensors for instance) in future, then i don't get the point..why reinventing the wheel? Your board has qfn/dfn footprints too, so I don't see how it's easier to handsolder.

Bigger board won't have those QFN and LGA footprints of course
As you say I don't want to reinvent the wheel, especially one that'll look square compared to yours
But I think it's important we still have a DIY option available for those who don't like soldering LGA or 0402, an equivalent of using the pro mini for the nrf5 world.

[sincze]

This sunday a friend of mine and I did not know what to build. So we decided to use a project designed by @Yveaux
Source

I received 2 new CDEByte antennas that needed a range test. As I live in a mansion.... Next to a park we figured out that walking 1 degrees outside would be an excellent time to do a range test. It was not raining so.....

Our conclusion would be:

• Cheap ass NRF... good enough for indoor usage.. if it can mesh.
• Cheap ass Amplified NRF.. good enough in the house, needs a bit more space and power, but works quite well.
• CDEByte... not cheap.. but man my hands were freezing outside due to the long range.. And according to @Yveaux we could achieve a higher range if we would have set the power to MAX... During testing this was MIN.

[bjacobse]

@sincze said in What did you build today (Pictures) ?:

CDEByte

Thank you for the test Which pointed to me that I urgently need a new serialgateway and use CDEBYTE

[brendanl]

Over the weekend I hacked the previously battery powered Minecraft lights in the Minecraft bedroom (doesn't everyone have one?). Now there's no more replacing batteries and OpenHAB controls include On, Off, Brightness and Flame Flicker.

This is the reason I was asking about establishing power distribution in the attic. I've decided to distribute 12v and drop to 5 or 3.3 only as needed.

More info and video: https://techconz.com/smart-home/minecraft-lights/

[NeverDie]

Received the PCB today, so I put together this leak detector for testing:


Looks as though some of the physical clearance tolerances are a bit tight, so I'll have to do another spin after changing the PCB layout. Some Kapton tape will compensate for now and allow for some initial testing.

[SquareKinematics]

Not MySensors, but related. Power over Ethernet (802.3af compliant) addon for the raspberry pi zero. I plan to use this for high power & high reliability devices where wireless will not work.

Top one is a higher power version, bottom one just uses an off the shelf regulator.

Currently these just have some IR LED's to control IR devices.

[NeverDie]

@SquareKinematics
Very useful to have. Not sure if you're aware, but you can buy PoE power adapters off the shelf. Even Amazon sells them. You select the output voltage you want with a slide switch.

[sincze]

And so it it almost Christmas...

Jolly jolly.. wel actually no....

We have had wet feet from the central heating system serveral times now around Christmas or New Year.
Causing a wet floor and other possible disasters. Yes I know.. A Central Heating Mechanism should not leak, you could try putting a bucket underneath... But that is not 'that home automation' smart that I was looking for.

So to detect a leakage.... I came up with this some time ago.

Pretty standard, a few wires... a Mysensors Node... and Pushover to send me urgens notifications about the leakge.

link url))

And ladies and gentlemen it actually works as you can see in the pushover sreenshot, it kicked off today.

[NeverDie]

@sincze You could also put some salt into your tray for added conductivity when things get wet.

[sincze]

@neverdie Great tip, this will resolve in even a quicker response during a flood right?. I already added toilet paper as cover for a smooth moist/water distribution. Lets add some salt to that and hopefully never see an error message again. But I wont bet a bitcoin on that ;-).. Happy with this cheap solution.

[gohan]

well, since you are not using distilled water, normal tap water should have enough conductivity

[manutremo]

@sincze How did you design the detection circuitry? Are you using an analog or a digital input?

Tap water should work without adding more conductivity - in my case I just designed something similar but I wanted to detect an overfill of osmosis water, which is similar to distilled. I had issues with getting it to work through a digital input, so I just built a voltage divider capable of detecting the small change in conductivity. I also added a capacitor to be sure that no false alarms would be received because of noise in the lines. It's been working perfect for days now.

[rmtucker]

@neverdie said in What did you build today (Pictures) ?:

@sincze You could also put some salt into your tray for added conductivity when things get wet.

Be very careful using salt,i killed an SI7021 doing something similar.
I got up one morning and found the sensor covered in white fur and it was dead

[andrew]

2 gang EU type livolo customisation, from theory to product... still in progress.

!

[andrew]

[NeverDie]

@andrew Wow!

[sincze]

@manutremo As the water indeed is 'rock' solid here in the area I was pretty succesfull using the digital pins. A short... when there is a water connection or open... when there is no connection. No false alarms. Only legit... Each leakage costs me money to get some guy to fix it for me. But at least the floor is not ruined anymore as I had that the first 2 times.

[sincze]

@rmtucker ai ai . what happened with the salt???

[sincze]

@andrew Wow indeed.

[sincze]

Almost Christmas, that means... Lights. In this case programmable 5v LED's that are driven by an Arduino and controlled via Mysensors & Domoticz.

While the arduino sketch has a lot of tricks (showing animations).. I still have to figure out HOW I can stop an animation from playing when I want to see the next one.. It now completes the first animation.. and then starts the one I selected. It needs to break from the function if a new message comes in. I'll have to look for some examples in the forum.

[rozpruwacz]

@andrew I see that You put the nrf module between two pcbs. Do You have issues with reception ? Because the boards may act as a shielding.

[andrew]

@rozpruwacz I try to avoid filled copper areas, which could act as RF blockers. as I mentioned, everything is still in progress, in-wall tests will just come. hopefully I'll have time for that in the next 2 weeks.

[mfalkvidd]

(CNC milling forked to separate thread. It got too interesting )

[mtiutiu]

@andrew

I know that this is not the right place to ask but I'm very curious how do you overcome the fact that in EU there's only the live with in the walls for light switches. I saw that you used a HLK-PM0xx module for testing which needs both live and null. Or maybe your "in-wall" wiring is different... Anyways congratulations for your work so far.

[andrew]

@mtiutiu well, that's the dirty hacking part electricians will probably not like it.

so, for first, I've a different approach to control my lamps compared to other in-wall switches and dimmers, due to the fact, that I won't switch the mains directly, with the switch. I have LED ceiling lamps which operate at 12V, but the power supplies (230V to 12V) are in the lamps' body. it could be possible to switch their mains on/off thus to turn the lamps on/off (this is what I do now with standard switches), but it is not possible to dim the lights this way.
to be able to dim the LEDs as well I'll have a lamp controller node right after the switching PSUs in each lamp. this will be controlled with the in-wall switches (and could be controlled with other nodes/gateways as well), over the air only.

as all of my wall lamp switch have dual wiring (one line in, two switched line out) I planned the following setup:
one switched line will be "re-assigned" and wired to N at the lamp. this way, at the wall switch I'll have both L and N. the other switched in-wall line will still forward the L to the lamp, but it will do it directly, to continuously operate the lamp's PSU, which also powers the lamp's controller module.
the controller will be always on and it will control both the dimming (PWM on the 12V) and the switching wich basically allowing or disabling the 12V from the PSU to the LEDs.

the in-wall switch will be basically just a radio remote controller this way, but operating from the mains, without any need of batteries.

I hope that my explanation wasn't too complicated

[fernando alvarez buylla]

well today finally i decide to change to c.h.i.p. as a controller with domoticz an amazing device but too bad for the product that got really bad customer support, ( if you planning to buy a c.h.i.p. read the forum first to get all the problems)

this is my controller using a chip, arduino nano

planing to chage the nano to a nodemcu

[NeverDie]

@fernando-alvarez-buylla Is the C.H.I.P. better than a Raspberry Pi Zero? At least with a Pi, you know there's going to be support.
https://www.adafruit.com/product/2885?gclid=EAIaIQobChMIrMm-lcv-1wIVxSSBCh1PJQB3EAQYASABEgItsvD_BwE
https://www.adafruit.com/product/3400

[fernando alvarez buylla]

@neverdie go for the pi zero chip is really nice a little better than the pi zero wifi and bt integraded 4gb and a few cool stuff , but theres people that pay a year ago and still waiting for the chip to arrive , no reply and no support on forum , to me chip is dying , you cant never go wrong with a pi , but i will try in a few months the omega2 to remplace my chips

[Nca78]

@fernando-alvarez-buylla said in What did you build today (Pictures) ?:

i will try in a few months the omega2 to remplace my chips

What kind of controller are you going to run on that underpowered thing ? Entry level price is cheap but if you want SD card reader and a bit more storage (32Mb) you have to pay 20$, more than the price of an orange pi zero + box which is already available and runs well with Armbian.

[Nca78]

Working on clearing up the backlog of unfinished NModule shields, today I finished to test the dual touch button shield, made a script to use it as on/off button or as dual button with short press = on and long press = off, as seen below as a dual scene controller.
https://www.youtube.com/watch?v=064Jlx2eawI

I made a box so it can be easily customized depending on what you use it for. Unfortunately internet is too bad at the moment in Vietnam to use Fusion 360 so I made it with 123D Design which is less convenient and it's not really high-end assembly

[NeverDie]

@nca78 said in What did you build today (Pictures) ?:

I made a box so it can be easily customized depending on what you use it for.

Is it a 3D printed enclosure then, or did you find some other way to make it? Looks very nice.

[Nca78]

@neverdie said in What did you build today (Pictures) ?:

@nca78 said in What did you build today (Pictures) ?:

I made a box so it can be easily customized depending on what you use it for.

Is it a 3D printed enclosure then, or did you find some other way to make it? Looks very nice.

3D printed. Bottom of prints can look pretty good if find the good settings and print on a glass surface.

[dbemowsk]

@nca78 I would assume that pads 1 and 2 are capacitive touch surfaces, correct? very nice design.

[Nca78]

@dbemowsk said in What did you build today (Pictures) ?:

@nca78 I would assume that pads 1 and 2 are capacitive touch surfaces, correct? very nice design.

Thank you !
Yes using dirt cheap TTP223 breakouts at the back so no SMD soldering needed.

[NeverDie]

I received the next version of the leak detector PCB today. Putting it together, it checks out: thanks to a change in layout, it has the same board size as before, but now no clearance issues. i.e. No need for Kapton tape!

If I had had my own PCB CNC etcher, it would have saved me the time I lost waiting for the earlier version from the fab, only to find out that the clearances were too tight and that I would have to re-do it. Looking forward to not having such delays ever again.

[wergeld]

Christmas wreathe for the techie in all of us.
pretty colors
flashing
wire wrapping

Uses a pro mini and a lot of wire-wrapping. Other components on the circuit boards are just there for show.

(ugh, google photos links not showing up so converted to links)

[dbemowsk]

@wergeld Hadn't thought of it that way... Good call....

[reinhold]

Finally got the PCBs from AllPCB.com (cost 5 Euros and took a total of 7 days from order submission to free DHL delivery to Europe!!!) for my own MySensors Arduino Pro Mini prototyping board. Unfortunately the soldering iron broke during my assembly, so it's not fully finished and I couldn't test it yet, either...

This board is inspired by the Nano IO shields that are offered on AliExpress and improves it further for my needs (and switched to the Pro Mini instead of the Nano).

• Each analog and digital pin of the Pro Mini has its own VCC and GND pins,
• the board also provides its own voltage regulator, solder pins for by NRF24L01+ and RFM69H are provided (plus the 5V->3.3V XC6206 regulator),
• either a tiny 55-pin breadboard or three I²C connectors can be placed on the board.
• One can also use PogoPins instead of soldering the Pro Mini (or headers for it) to burn the bootloader or change fuses on the Pro Mini via the ICSP connector.
  

All design files are available on GitHub: https://www.openhardware.io/view/538/Arduino-Pro-Mini-IO-Shield

[NeverDie]

@reinhold I like how you hid the pin holes for the ICSP underneath the breadboard.

[Yveaux]

A temperature controlled PWM fan controller for my DPS5005 power supply!

The original 2-wire fan that came with the power supply casing made an incredible amount of noise.
Using PWM to reduce its velocity made it even more noisy

So, I made a fresh start and ordered a quality fan (almost as expensive as the whole casing...)

Using nothing more than a 5V pro mini, piezo speaker, DS18B20 temperature sensor and a resistor I made a full fledged fan controller

It takes the current temp from the DS18B20 (which will be mounted on the heatsink) and ramps up the fan linearly in the 30..60 C range. Below 30 C, the fan is off.
If RPM readback indicates a stalled fan, or DS18B20 returns wrong values the buzzer will force me to invest what's wrong

[mfalkvidd]

@yveaux next step is to use the piezo for active noise cancelling

[Yveaux]

@mfalkvidd don't tempt me...

[gohan]

@yveaux that looks like a Noctua fan. I have a DPS5015 and I was planning to make some mods on the case (I got the other model that is bigger), so I guess I am gonna ask you for some code

[Nca78]

@yveaux said in What did you build today (Pictures) ?:

The original 2-wire fan that came with the power supply casing made an incredible amount of noise.
Using PWM to reduce its velocity made it even more noisy

Less funny that way but did you try to lower the PWM frequency of the atmega to it's minimum ? I had the same problem with the fan I put in my fridge cabinet and low PWM frequency solved it.

[Yveaux]

@nca78 I did fiddle with the frequency, but the fan was just total crap, so I decided to replace it anyhow.

[tbowmo]

@Yveaux @Nca78

An RC filter could probably also make wonders for the fan. I had to add one for the parts fan on my 3D printer. Couldn't control the speed with PWM without the RC filter..

Btw. probably a bit over the top of using an arduino as fan control? Unless you plan on adding a NRF radio, and report the temperature + PWM duty cycle to your mysensors system, and store the values in influxdb?

[NeverDie]

@tbowmo said in What did you build today (Pictures) ?:

Btw. probably a bit over the top of using an arduino as fan control?

Really? How so? Seems like the end result will be as quiet as possible, yet avoids stalling.

[Yveaux]

@neverdie said in What did you build today (Pictures) ?:

@tbowmo said in What did you build today (Pictures) ?:

Btw. probably a bit over the top of using an arduino as fan control?

Really? How so? Seems like the end result will be as quiet as possible, yet avoids stalling.

Indeed! I thought of going the analog way, but the final solution would be more expensive, I didn't have the parts at hand, it wouldn't have as many features and it would have cost me a lot more time...

[Yveaux]

@tbowmo said in What did you build today (Pictures) ?:

An RC filter could probably also make wonders for the fan.

Probably, but again, the fan was total crap and made a lot of wind noise due to the bad condition of its blades.

[tbowmo]

a 555 and a couple of resistors / capacitors..

https://electronics.stackexchange.com/questions/91102/555-temperature-controlled-pwm

But then again, I recon that most of us might have more atmega328 based boards, than 555's in the parts bin

about the RC for PWM, it was meant as a hint for others that might fight problems with a fan that they couldn't control properly with PWM..

[ben999]

@tbowmo 555s need knowledge... i wouldn't know what to do with these except cufflinks
arduinos are much more accessible

[Yveaux]

@tbowmo said in What did you build today (Pictures) ?:

a 555 and a couple of resistors / capacitors..
https://electronics.stackexchange.com/questions/91102/555-temperature-controlled-pwm

Still, no tacho readback to detect stalled fans, no temperature sensor verification or overtemperature warning, no initial fan spinup and little control over how the fans reacts to temperature changes....

[mfalkvidd]

Testing a flow meter.

It works pretty well, but at high flow rates (90 pulses per second) the esp8266 resets. Not sure if the reset is caused by too many interrupts or if the sensor uses too much power.

[dbemowsk]

Though not fully finished, I am prototyping a new in-wall switch/scene controller with an integrated 128x64 OLED display. The design is made to fit my decora wall switch design that I had posted a while back. Here is a mock up of how I think the keypad and screen will be layed out.
!

For the screen, I am hoping to display the current room temperature and possibly the outside temp. I can also scroll messages across the screen if needed. I can also do some custom graphics and icons.

I have tested the display connected to my uno with the Adafruit sample code and think it does a nice job. This is not my video, but it is the same sample code that I used to test it.
128x64 cheap OLED display Adafruit library Arduino UNO – 00:59
— Cutter Slade

I'll post more as I get further along.

[sincze]

Well as you can see, my prototyping skills are not at the level of @dbemowsk (always interested in the under side of the boards, mine look .. yeah a mess?), however I managed to create this enclosure (once closed looks nice enough).

It should control the programmable LED lights in my livingroom (900 pieces).The board is powered 5v from the same power supply as the LED's. In addition it needs to measure the lux in the livingroom to decide if it is dark enough to turn on the lights.

Initial tests looked okay, however after finding 56 effects in the Doll House of @Yveaux I decided to use that FX library as well. However the Arduino Mega is out of RAM to accomodate a full controll of the 900 LEDS. It will only control around 650 LEDS with that FX library.

After being in contact with @Yveaux we decided to use an ESP solution. I have a spare NodeMCU v3 that can house the ESP gateway sketch and will have enough memory to controll the LEDs. Well now I have to look for a nice prototyping thing/case for the NodeMCU and add a level shifter as well. The LED's control line wants to be controlled by at least 3,7v.

This is the nice thing about these kind of projects.. "There is always something to do"

[dbemowsk]

@sincze I've done and seen a lot worse than this. Good job. Any particular reason you chose to use a Arduino Mega?

[sincze]

@dbemowsk Well first I started with my all time favourite... the Nano, as I have prototyping boards available.;-) but even with some simple light shows it did not have enough memory to hold de states of each individual 900 LEDs.

I moved to the Mega. as it has more memory. My sketch worked fine so I started to build the node in its box. I also looked at the Github for the Doll House inspiration. I found the library that had 56 effects. So I thought why not use that one... Migrated my sketch, did a few tests with 300 LEDS, completed the enclosure and only than found out It could not controll all the 900 leds, due to memory issue. Insufficient RAM.

But as this forum is a learning curve for me please feel free to share your thoughts. I always look at examples from others and see what I can do with it myself. I don't have fancy PCB equipment, justs a soldering iron and my own Aliexpress wearhouse with components

[dbemowsk]

@sincze I should have known. All you had to say was memory and it would have made sense, or should I say sincze. LOL. With needing to hold states of 900 LEDs, I am going to guess that they are WS2812 LED strips.

[NeverDie]

@dbemowsk I like your buttons-OLED a lot. It would be nice to have available a generic module like this with a screen and buttons and which "just works" to use on different projects. Nice work!

[dbemowsk]

@neverdie I am hoping to soon have all of my boards posted on openhardware.io. I am just waiting for a reply on a thread I posted last night on what OHL to use when I upload them. I currently have a power supply board, the controller board that you see in the pics above, and a universal switch board that allows you to build it into everything from a single paddle switch to an 8 button scene controller. All of this fits a standard decora style US wall switch box. I designed the controller to be somewhat universal which is what gave me the flexibility for this design. I had thought about a similar design with this OLED display in which the buttons were layed out in an up, down, left, right and center select (U, D, L, R, S) configuration. If I ever get around to designing a board for this, I might see if it is possible for me to fit the buttons in a multi-configuration layout similar to my original button board where you can choose to make the 6 button layout like in my pics, or the U, D, L, R, S layout.

[dbemowsk]

@neverdie As far has having a generic module, the display and button board, or even my original button board can be used with other things. The key is just knowing the connections, and you could plug these on to any header in that configuration. Below is the layout of my controller board, but if you layed out headers in the configurations I have on this board, you could use any of my switch boards.

[dbemowsk]

Since this is still in mockup stage, this is the other button configuration I was thinking about with an up, down, left, right, and center select.

[sundberg84]

Assembling and testing rev 5 tonight.

[dbemowsk]

So last night I got the display connected and I now have the Adafruit sample code running on it:
Wall switch OLED display test – 01:58
— Dan Bemowski

Tonight I will be installing the buttons and hopefully working on some test code for the buttons and the screen. Here is my proposal for the switch wiring. The red traces are for the columns, and the blue are for the rows.

One thing that I would like to do with this is to possibly display some animated graphics for the current weather condition. Seeing the falling stars at the end of the Adafruit test code made me think of rain or snow falling. Something like that might go outside the limits of the pro minis memory, but hey, never hurts to try.

[dbemowsk]

So I have all of the keys soldered in and wired. I did some simple tests to see how things were working. I tested with a font size of 2, and again with a font size of 4.

Font size 2.
OLED keypad test #1 – 00:27
— Dan Bemowski

Font size 4
OLED keypad test #2 – 00:27
— Dan Bemowski

[boozz]

Today I build a basic node for temperature (DS18B20) and analog input. Most of my nodes feature a DS18B20 connection as it only 'costs' a 4k7 resistor and a connector.
PCB is etched.

[BulldogLowell]

@dbemowsk said in What did you build today (Pictures) ?:

Seeing the falling stars at the end of the Adafruit test code made me think of rain or snow falling. Something like that might go outside the limits of the pro minis memory, but hey, never hurts to try.

Hey Nice Work!

I see you are using I2C, vs SPI... that may be why your display is so much slower than the demo in the Adafruit video.

Can't wait to see the final board!

[NeverDie]

@boozz What are those 3 pin male connectors called?

[andrew]

@neverdie said in What did you build today (Pictures) ?:

@boozz What are those 3 pin male connectors called?

I guess that is molex 3 pin tht pcb connector, like this https://uk.rs-online.com/web/p/pcb-headers/4838477/

[Dalhoj]

Hi
Its been a long time since I made something Mysensors.

But now I made my first WIFI node with led dimmer. Using the ESP8266 NodeMCU.

I use the VeraPlus and made a new Mysensors Device, and put in the IP of the NodeMCU.

This is not my last wifi node. I am thinking of making a motion/temp sensor next

and the box.

[andrew]

one step further...

ISP works, FTDI works, test code works, and looks like a genuine board
now comes the hard part

[NeverDie]

@andrew
What is that spring loaded contraption? Is it for holding your PCB while you solder it? If so, I can see how that would be handy.

[andrew]

@neverdie said in What did you build today (Pictures) ?:

What is that spring loaded contraption? Is it for holding your PCB while you solder it? If so, I can see how that would be handy.

yes. I have a "third hand" station as well, which is good for through hole parts and pcb handling, but for smd, this could be a life saver.

this is the exact item which I ordered and which you can see on the photo:
https://www.aliexpress.com/item/8-12cm-Fixture-Motherboard-PCB-Holder-For-Mobile-Phone-Board-Repair-Tool/32767458535.html

[dbemowsk]

Today's progress on the new switch consists of finishing the basic 3D model of the wall switch plate and working on some of the programming.

For the wall plate design I do not have buttons as of yet, but the main part of the wall plate turned out good. I did the initial print in yellow because I am out of white at the moment. I am still trying to figure out the best way of printing it. In the video, you will see that the tabs are looking a bit rough. That is because I printed this one face down with supports for the tabs. If I decide to print them that way, it won't be bad because the tabs will be hidden under the wall plate cover. I will try printing them both ways to see which comes out better.

For the programming, I created a couple bitmap icons and did a sample of those icons animated on the screen. The animations toggle back and forth and each runs for about 10 seconds. One bitmap is a rain drop, and the other is a snow flake. The idea is to use these to display weather conditions. I will probably design some clouds and a sun as well and have 4 possible animated weather displays.
raindrops and snowflakes – 00:31
— Dan Bemowski

[boozz]

@neverdie

Yes these are 'molex' pcb connectors.

An ebay alternative can be found at: Ebay shop cayin34