Raspberry GW rfm95 wont work



  • Hi,
    I use an The Dragino LoRa/GPS_HAT and an Adafruit rfm95 Modul. But I can't get any of them to work on my Raspberry. Are there any specific wiring or configuration for them?

    For the Adafruit I used this wiring:
    5V -> 5V
    GND -> GND
    G0 -> 22
    SCK -> 23
    MISO -> 21
    MOSI -> 19
    CS -> 24
    RST -> GND


  • Mod

    Congrats on your first post @geforcegamer 🙂

    The wiring looks good.
    What does the debug log say?



  • Here the debug log:

    pi@raspberrypi:~/MySensors $ sudo ./bin/mysgw
    Feb 12 11:34:17 INFO  Starting gateway...
    Feb 12 11:34:17 INFO  Protocol version - 2.3.2-beta
    Feb 12 11:34:17 DEBUG Serial port /dev/ttyMySensorsGateway (115200 baud) created
    Feb 12 11:34:17 DEBUG MCO:BGN:INIT GW,CP=RLNGL---,REL=3,VER=2.3.2-beta
    Feb 12 11:34:17 DEBUG TSF:LRT:OK
    Feb 12 11:34:17 DEBUG TSM:INIT
    Feb 12 11:34:17 DEBUG TSF:WUR:MS=0
    Feb 12 11:34:17 DEBUG !TSM:INIT:TSP FAIL
    Feb 12 11:34:17 DEBUG TSM:FAIL:CNT=1
    Feb 12 11:34:17 DEBUG TSM:FAIL:DIS
    Feb 12 11:34:17 DEBUG TSF:TDI:TSL
    Feb 12 11:34:27 DEBUG TSM:FAIL:RE-INIT
    Feb 12 11:34:27 DEBUG TSM:INIT
    Feb 12 11:34:27 DEBUG !TSM:INIT:TSP FAIL
    Feb 12 11:34:27 DEBUG TSM:FAIL:CNT=2
    Feb 12 11:34:27 DEBUG TSM:FAIL:DIS
    Feb 12 11:34:27 DEBUG TSF:TDI:TSL
    

    Where can I find the pins in the config? I think there is something wrong.


Log in to reply
 

Suggested Topics

1
Online

11.4k
Users

11.1k
Topics

112.7k
Posts