bootloaders

[Terence Faul]

Hi

Can someone assist.

is mysensors/MySensorsBootloaderRF24 the same as MYSbootloader?

[mfalkvidd]

@terence-faul the readme says so at least

[Terence Faul]

Yep that's why I was asking.

Anyone able to assist in getting this board into platformio?

[dirkc]

@terence-faul any solution so far?

I found this:

create a file, e.g. mysensors_bootloader_130_8Mhz.json and save it to ~/.platformio/boards/

{
  "build": {
    "core": "arduino",
    "extra_flags": "-DARDUINO_ARCH_AVR -DARDUINO_AVR_PRO",
    "f_cpu": "8000000L",
    "mcu": "atmega328p",
    "variant": "standard"
  },
  "frameworks": [
    "arduino"
  ],
  "fuses": {
    "efuse": "0xFE",
    "hfuse": "0xD2",
    "lfuse": "0xE2",
    "lock": "0x0F",
    "unlock": "0x3F"
  },
  "name": "MySensorsBootloader 1.3.0 (Atmega328P@8M,3.3V)",
  "upload": {
    "maximum_ram_size": 2048,
    "maximum_size": 30720,
    "protocol": "arduino",
    "require_upload_port": true,
    "speed": 57600
  },
  "url": "http://www.mysensors.org",
  "vendor": "MySensors"
}

the platformio.ini should look like this:

[env:mysensors_bootloader_130_8Mhz]
platform = atmelavr
framework = arduino
board = MYSBootloader_8MHz.hex
src_build_flags = -I/Users/dirk/Arduino/libraries/MySensors

lib_deps =
  # Using a library name

but I do not know where to store the MYSBootloader_8MHz.hex