RFM69HW radio speed

[dzairo]

Hi All .
Where I can set radio speed for RFM69HW module ??
I use Atmega328p as MCU and RFM69HW module , I want set radio speed around 3,6kbps .
Is it possible ??

and output power for RFM69HW set to maximum +20dBm

where I set this parameter??

thanks.

[Yveaux]

@dzairo for the new RFM69 driver it is defined by the MY_RFM69_MODEM_CONFIGURATION parameter.

The library contains a number of predefined settings, starting from: https://github.com/mysensors/MySensors/blob/development/hal/transport/RFM69/driver/new/RFM69_new.h#L201

Select a preconfigured setting or roll your own, and add the define before the MySensors include:

#define MY_RFM69_MODEM_CONFIGURATION RFM69_FSK_BR55_5_FD50

[dzairo]

thanks.
but in MyConfig.h is this setting disabled :

//#define MY_RFM69_MODEM_CONFIGURATION (RFM69_FSK_BR55_5_FD50)

then I need enable it .. or leave because this is default modem setting after power up ?
and need enable only if want select another configuration ??

[mfalkvidd]

@dzairo no need to modify MyConfig.h. Just add the define to your sketch, if you want to override the default setting. Additional documentation: https://www.mysensors.org/apidocs/group__RFM69Newgrp.html#ga70bef975c2c3070e34c24770f7f301b9