Support for Gas Meter?

[macieiks]

Hello Guys,

I would like to ask if anyone managed to make Gas Meter sketch using MySensors? As I Can see there is no official support for S_GAS and V_M3, however I would like to ask, maybe someone has workaround for it? Right now I am using MySensor (door sketch, reed attached near GAS meter magnet) and in Domoticz (software) I have virtual switch that triggers script to update the counter value when door switch is triggered ON. It is working, but there is a big disadvantage, it is spamming a lot of logs and my SD card will not be in good shape in close future, so I am looking for other solution. Any advices?

Thanks
Maciek

[sundberg84]

Hi!

Is it a gas meter with a magnet sensor? If so you could just use the rain sketch, either http://www.mysensors.org/build/rain or i made my own (http://forum.mysensors.org/topic/1950/domotiocz-rain-gauge) thats some lighter (and based on a reed switch/tipping bucket magnet. You have to reconfig it so each magnet trigger is equal your gas volume.

This is supported in the last beta atleast:

S_GAS
V_FLOW:
Flow of water/gas in meter (for now send as a percentage sensor)

V_VOLUME:
Water or Gas Volume

[macieiks]

Hello everyone

I just updated my Ethernet W5100 Gateway to beta 1.6.0 and I modified "WaterPulseSensor" to support V_GAS - present(CHILD_ID, S_GAS) and it is working... Right now I am testing it on my desk but I will try this weekend to attach magnet sensor to my gas meter

See yaaa