Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor
  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Development
  3. MYSBootloader 1.3 pre-release & MYSController 1.0.0beta

MYSBootloader 1.3 pre-release & MYSController 1.0.0beta

Scheduled Pinned Locked Moved Development
otamyscontrollermysbootloader
198 Posts 53 Posters 111.1k Views 58 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • n1ck1355N n1ck1355

    thx tekka for clearing this :)
    for my bootloader problem:
    i burned the 1.3mysbootloader with the 8mhz config successfully from the arduino dev ide.
    then i uploaded a little test sketch like this without errors:

    void setup() {
  Serial.begin(57600);
  Serial.println("Setup Start");
}

void loop() {
}

    but there is no output on the serial monitor. it lookes like the bootloader didn't start the sketch.

    T Offline
    T Offline
    tekka
    Admin
    wrote on last edited by
    #32

    @n1ck1355 Please enable logging in MYSController, reboot the node and post the log here after a few mins of recording.

    1 Reply Last reply
    0
    • T Offline
      T Offline
      Takero
      Hardware Contributor
      wrote on last edited by
      #33

      Hi, i like OTA Update :-)

      How it is possible to change the Cannel from 76 to 105?

      R 1 Reply Last reply
      0
      • T Takero

        Hi, i like OTA Update :-)

        How it is possible to change the Cannel from 76 to 105?

        R Offline
        R Offline
        rollercontainer
        wrote on last edited by
        #34

        @Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

        T 1 Reply Last reply
        0
        • R rollercontainer

          @Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

          T Offline
          T Offline
          Takero
          Hardware Contributor
          wrote on last edited by
          #35

          @rollercontainer said:

          @Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

          Yes, i know what, but this is not there I am looking for.

          The Autor wrote:
          Attached bootloader file, compiled with these settings:

          nRF24 (Channel 76, base address 0xA8A8E1FC00, data rate 250kbs)
          115200 baud (16Mhz) or 57600 (8Mhz)

          I want a Bootloader file with Channel 105.

          R 1 Reply Last reply
          0
          • T Takero

            @rollercontainer said:

            @Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

            Yes, i know what, but this is not there I am looking for.

            The Autor wrote:
            Attached bootloader file, compiled with these settings:

            nRF24 (Channel 76, base address 0xA8A8E1FC00, data rate 250kbs)
            115200 baud (16Mhz) or 57600 (8Mhz)

            I want a Bootloader file with Channel 105.

            R Offline
            R Offline
            rollercontainer
            wrote on last edited by
            #36

            sorry, you are right. Since the source isnt yet available, you cant compile your custom bootloader. So, thats a no.

            1 Reply Last reply
            0
            • n1ck1355N Offline
              n1ck1355N Offline
              n1ck1355
              wrote on last edited by
              #37

              @tekka here is the log output:

              05.04.16 21:51:34	STARTUP	Initialize message logging
05.04.16 21:51:34	STARTUP	1.0.0 (build 3312)
05.04.16 21:51:34	STARTUP	FPC 3.0.0 / Lazarus 1.6
05.04.16 21:51:34	STARTUP	still under development :) tekka 2016
05.04.16 21:51:34	STARTUP	Load INI file...
05.04.16 21:51:34	STARTUP	INI version NA
05.04.16 21:52:08	INFO	Connected to 192.168.0.101:5003
05.04.16 21:52:23	RX	2;255;3;0;15;0100
05.04.16 21:52:23	NODE	New node discovered, node id=2
05.04.16 21:52:23	CHILD	New child discovered, node id=2, child id=internal
05.04.16 21:52:30	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:30	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:30	INFO	BL version=258
05.04.16 21:52:30	INFO	No FW assigned
05.04.16 21:52:36	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:36	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:36	INFO	BL version=258
05.04.16 21:52:36	INFO	No FW assigned
05.04.16 21:52:43	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:43	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:43	INFO	BL version=258
05.04.16 21:52:43	INFO	No FW assigned
05.04.16 21:53:00	RX	2;255;3;0;15;0100
05.04.16 21:53:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:07	INFO	BL version=258
05.04.16 21:53:07	INFO	No FW assigned
05.04.16 21:53:14	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:14	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:14	INFO	BL version=258
05.04.16 21:53:14	INFO	No FW assigned
05.04.16 21:53:21	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:21	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:21	INFO	BL version=258
05.04.16 21:53:21	INFO	No FW assigned
05.04.16 21:53:38	RX	2;255;3;0;15;0100
05.04.16 21:53:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:45	INFO	BL version=258
05.04.16 21:53:45	INFO	No FW assigned
05.04.16 21:53:52	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:52	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:52	INFO	BL version=258
05.04.16 21:53:52	INFO	No FW assigned
05.04.16 21:53:58	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:58	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:58	INFO	BL version=258
05.04.16 21:53:58	INFO	No FW assigned
05.04.16 21:54:16	RX	2;255;3;0;15;0100
05.04.16 21:54:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:23	INFO	BL version=258
05.04.16 21:54:23	INFO	No FW assigned
05.04.16 21:54:29	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:29	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:29	INFO	BL version=258
05.04.16 21:54:29	INFO	No FW assigned
05.04.16 21:54:36	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:36	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:36	INFO	BL version=258
05.04.16 21:54:36	INFO	No FW assigned
05.04.16 21:54:54	RX	2;255;3;0;15;0100
05.04.16 21:55:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:01	INFO	BL version=258
05.04.16 21:55:01	INFO	No FW assigned
05.04.16 21:55:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:07	INFO	BL version=258
05.04.16 21:55:07	INFO	No FW assigned
05.04.16 21:55:14	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:14	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:14	INFO	BL version=258
05.04.16 21:55:14	INFO	No FW assigned
05.04.16 21:55:32	RX	2;255;3;0;15;0100
05.04.16 21:55:38	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:38	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:38	INFO	BL version=258
05.04.16 21:55:38	INFO	No FW assigned
05.04.16 21:55:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:45	INFO	BL version=258
05.04.16 21:55:45	INFO	No FW assigned
05.04.16 21:55:52	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:52	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:52	INFO	BL version=258
05.04.16 21:55:52	INFO	No FW assigned
05.04.16 21:56:10	RX	2;255;3;0;15;0100
05.04.16 21:56:16	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:16	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:16	INFO	BL version=258
05.04.16 21:56:16	INFO	No FW assigned
05.04.16 21:56:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:23	INFO	BL version=258
05.04.16 21:56:23	INFO	No FW assigned
05.04.16 21:56:30	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:30	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:30	INFO	BL version=258
05.04.16 21:56:30	INFO	No FW assigned
05.04.16 21:56:47	RX	2;255;3;0;15;0100
05.04.16 21:56:54	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:54	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:54	INFO	BL version=258
05.04.16 21:56:54	INFO	No FW assigned
05.04.16 21:57:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:01	INFO	BL version=258
05.04.16 21:57:01	INFO	No FW assigned
05.04.16 21:57:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:07	INFO	BL version=258
05.04.16 21:57:07	INFO	No FW assigned
05.04.16 21:57:25	RX	2;255;3;0;15;0100
05.04.16 21:57:32	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:32	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:32	INFO	BL version=258
05.04.16 21:57:32	INFO	No FW assigned
05.04.16 21:57:39	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:39	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:39	INFO	BL version=258
05.04.16 21:57:39	INFO	No FW assigned
05.04.16 21:57:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:45	INFO	BL version=258
05.04.16 21:57:45	INFO	No FW assigned
05.04.16 21:58:03	RX	2;255;3;0;15;0100
05.04.16 21:58:10	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:10	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:10	INFO	BL version=258
05.04.16 21:58:10	INFO	No FW assigned
05.04.16 21:58:16	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:16	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:16	INFO	BL version=258
05.04.16 21:58:16	INFO	No FW assigned
05.04.16 21:58:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:23	INFO	BL version=258
05.04.16 21:58:23	INFO	No FW assigned
05.04.16 21:58:41	RX	2;255;3;0;15;0100
05.04.16 21:58:45	USER	Debug=FALSE
05.04.16 21:58:45	INFO	*** Logging STOP ***
05.04.16 21:58:47	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:47	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:47	INFO	BL version=258
05.04.16 21:58:47	INFO	No FW assigned
05.04.16 21:58:54	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:54	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:54	INFO	BL version=258
05.04.16 21:58:54	INFO	No FW assigned
05.04.16 21:59:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:59:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:59:01	INFO	BL version=258
05.04.16 21:59:01	INFO	No FW assigned

              hope it helps finding out whats wrong ;)

              1 Reply Last reply
              0
              • T tekka

                @Fabien Are you running MYSController on WINE? I updated a few things, please update to the most recent version of MYSController (build 3312, here or via update button) and post the log. Thanks.

                F Offline
                F Offline
                Fabien
                wrote on last edited by Fabien
                #38

                @tekka I try with build 3312 and working fine with wine
                Now I'm looking for I_PRESENTATION. With 2.0 beta it doesn't seem to work. May I use smartSleep ?

                1 Reply Last reply
                0
                • F Offline
                  F Offline
                  Fabien
                  wrote on last edited by
                  #39

                  So after few test, wrks fine with I_PRESENTATION request and using smartSleep (with interrupts too).

                  1 Reply Last reply
                  1
                  • n1ck1355N Offline
                    n1ck1355N Offline
                    n1ck1355
                    wrote on last edited by
                    #40

                    @tekka : do you have any clue whats wrong with my setup?

                    T 1 Reply Last reply
                    0
                    • DrJeffD Offline
                      DrJeffD Offline
                      DrJeff
                      wrote on last edited by
                      #41

                      Does the gateway need the OTA firmware (flashed) written to it as well as the Nodes?

                      T 1 Reply Last reply
                      0
                      • n1ck1355N n1ck1355

                        @tekka : do you have any clue whats wrong with my setup?

                        T Offline
                        T Offline
                        tekka
                        Admin
                        wrote on last edited by tekka
                        #42

                        @n1ck1355 yes, probably there is a timing issue with serial uploads. Need to review the STK500 code. Can you confirm that OTA FW updates work fine?

                        1 Reply Last reply
                        0
                        • DrJeffD DrJeff

                          Does the gateway need the OTA firmware (flashed) written to it as well as the Nodes?

                          T Offline
                          T Offline
                          tekka
                          Admin
                          wrote on last edited by
                          #43

                          @DrJeff No, only the nodes

                          DrJeffD 1 Reply Last reply
                          0
                          • T tekka

                            @DrJeff No, only the nodes

                            DrJeffD Offline
                            DrJeffD Offline
                            DrJeff
                            wrote on last edited by
                            #44

                            @tekka Cool thanks, can I use Arduino as ISP to program bootloader?

                            T 1 Reply Last reply
                            0
                            • DrJeffD DrJeff

                              @tekka Cool thanks, can I use Arduino as ISP to program bootloader?

                              T Offline
                              T Offline
                              tekka
                              Admin
                              wrote on last edited by
                              #45

                              @DrJeff Yep :)

                              DrJeffD 1 Reply Last reply
                              0
                              • T tekka

                                @DrJeff Yep :)

                                DrJeffD Offline
                                DrJeffD Offline
                                DrJeff
                                wrote on last edited by
                                #46

                                @tekka , Time to try Thanks! :)

                                1 Reply Last reply
                                0
                                • n1ck1355N Offline
                                  n1ck1355N Offline
                                  n1ck1355
                                  wrote on last edited by
                                  #47

                                  @tekka yes ota fw updates works. Tried it with the Time fw

                                  1 Reply Last reply
                                  0
                                  • n1ck1355N Offline
                                    n1ck1355N Offline
                                    n1ck1355
                                    wrote on last edited by n1ck1355
                                    #48

                                    @tekka i musst revert my previous post...
                                    I've OTA uploaded the sketch from my first post:

                                    void setup() {
  Serial.begin(57600);
  Serial.println("Setup Start");
}

void loop() {
}

                                    and i connected the board over Serial with my computer. After uploading the sketch i did not noticed any output on the serial monitor in the Arduino IDE. Also checked the transfer rate.

                                    However the time reporter firmware works fine.

                                    1 Reply Last reply
                                    0
                                    • siklosiS Offline
                                      siklosiS Offline
                                      siklosi
                                      wrote on last edited by
                                      #49

                                      Is there a way to send ota firmware to node using some cli (python or...) script? I'm using MySensors with domoticz on RPi and when flashing new firmware I usually disconnect gw from rpi plug it into notebook and send fw using MYSController. If I could just disable gw in domoticz and send fw using some script it would be great until (if) domoticz gets support for ota fw.

                                      1 Reply Last reply
                                      1
                                      • R Offline
                                        R Offline
                                        rollercontainer
                                        wrote on last edited by rollercontainer
                                        #50

                                        I've just tried two 3,3V Pro Minis. Flashed the 8MHz MYSBootloader without problems (Nano as ISP). After that I connected the FTDI Adapter and programmed Blink and ReadAnalogVoltage examples without error. Both didn't worked on both Pro Minis. With original Bootloaders, they work.

                                        Where is my fault?

                                        T 1 Reply Last reply
                                        0
                                        • R rollercontainer

                                          I've just tried two 3,3V Pro Minis. Flashed the 8MHz MYSBootloader without problems (Nano as ISP). After that I connected the FTDI Adapter and programmed Blink and ReadAnalogVoltage examples without error. Both didn't worked on both Pro Minis. With original Bootloaders, they work.

                                          Where is my fault?

                                          T Offline
                                          T Offline
                                          tekka
                                          Admin
                                          wrote on last edited by tekka
                                          #51

                                          @rollercontainer You have to provide additional information such as logs, etc. for troubleshooting

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes

                                          24

                                          Online

                                          12.0k

                                          Users

                                          11.2k

                                          Topics

                                          113.4k

                                          Posts


                                          Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                          • Login
                                          • Don't have an account? Register
                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • MySensors
                                          • OpenHardware.io
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular