MYSBootloader 1.3 pre-release & MYSController 1.0.0beta

[rollercontainer]

@Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

[Takero]

@rollercontainer said:

@Takero https://github.com/mysensors/Arduino/blob/development/libraries/MySensors/MyConfig.h#L387

Yes, i know what, but this is not there I am looking for.

The Autor wrote:
Attached bootloader file, compiled with these settings:

nRF24 (Channel 76, base address 0xA8A8E1FC00, data rate 250kbs)
115200 baud (16Mhz) or 57600 (8Mhz)

I want a Bootloader file with Channel 105.

[rollercontainer]

sorry, you are right. Since the source isnt yet available, you cant compile your custom bootloader. So, thats a no.

[n1ck1355]

@tekka here is the log output:

05.04.16 21:51:34	STARTUP	Initialize message logging
05.04.16 21:51:34	STARTUP	1.0.0 (build 3312)
05.04.16 21:51:34	STARTUP	FPC 3.0.0 / Lazarus 1.6
05.04.16 21:51:34	STARTUP	still under development :) tekka 2016
05.04.16 21:51:34	STARTUP	Load INI file...
05.04.16 21:51:34	STARTUP	INI version NA
05.04.16 21:52:08	INFO	Connected to 192.168.0.101:5003
05.04.16 21:52:23	RX	2;255;3;0;15;0100
05.04.16 21:52:23	NODE	New node discovered, node id=2
05.04.16 21:52:23	CHILD	New child discovered, node id=2, child id=internal
05.04.16 21:52:30	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:30	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:30	INFO	BL version=258
05.04.16 21:52:30	INFO	No FW assigned
05.04.16 21:52:36	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:36	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:36	INFO	BL version=258
05.04.16 21:52:36	INFO	No FW assigned
05.04.16 21:52:43	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:52:43	DEBUG	Undefined firmware/type for node=2
05.04.16 21:52:43	INFO	BL version=258
05.04.16 21:52:43	INFO	No FW assigned
05.04.16 21:53:00	RX	2;255;3;0;15;0100
05.04.16 21:53:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:07	INFO	BL version=258
05.04.16 21:53:07	INFO	No FW assigned
05.04.16 21:53:14	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:14	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:14	INFO	BL version=258
05.04.16 21:53:14	INFO	No FW assigned
05.04.16 21:53:21	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:21	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:21	INFO	BL version=258
05.04.16 21:53:21	INFO	No FW assigned
05.04.16 21:53:38	RX	2;255;3;0;15;0100
05.04.16 21:53:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:45	INFO	BL version=258
05.04.16 21:53:45	INFO	No FW assigned
05.04.16 21:53:52	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:52	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:52	INFO	BL version=258
05.04.16 21:53:52	INFO	No FW assigned
05.04.16 21:53:58	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:53:58	DEBUG	Undefined firmware/type for node=2
05.04.16 21:53:58	INFO	BL version=258
05.04.16 21:53:58	INFO	No FW assigned
05.04.16 21:54:16	RX	2;255;3;0;15;0100
05.04.16 21:54:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:23	INFO	BL version=258
05.04.16 21:54:23	INFO	No FW assigned
05.04.16 21:54:29	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:29	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:29	INFO	BL version=258
05.04.16 21:54:29	INFO	No FW assigned
05.04.16 21:54:36	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:54:36	DEBUG	Undefined firmware/type for node=2
05.04.16 21:54:36	INFO	BL version=258
05.04.16 21:54:36	INFO	No FW assigned
05.04.16 21:54:54	RX	2;255;3;0;15;0100
05.04.16 21:55:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:01	INFO	BL version=258
05.04.16 21:55:01	INFO	No FW assigned
05.04.16 21:55:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:07	INFO	BL version=258
05.04.16 21:55:07	INFO	No FW assigned
05.04.16 21:55:14	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:14	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:14	INFO	BL version=258
05.04.16 21:55:14	INFO	No FW assigned
05.04.16 21:55:32	RX	2;255;3;0;15;0100
05.04.16 21:55:38	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:38	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:38	INFO	BL version=258
05.04.16 21:55:38	INFO	No FW assigned
05.04.16 21:55:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:45	INFO	BL version=258
05.04.16 21:55:45	INFO	No FW assigned
05.04.16 21:55:52	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:55:52	DEBUG	Undefined firmware/type for node=2
05.04.16 21:55:52	INFO	BL version=258
05.04.16 21:55:52	INFO	No FW assigned
05.04.16 21:56:10	RX	2;255;3;0;15;0100
05.04.16 21:56:16	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:16	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:16	INFO	BL version=258
05.04.16 21:56:16	INFO	No FW assigned
05.04.16 21:56:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:23	INFO	BL version=258
05.04.16 21:56:23	INFO	No FW assigned
05.04.16 21:56:30	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:30	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:30	INFO	BL version=258
05.04.16 21:56:30	INFO	No FW assigned
05.04.16 21:56:47	RX	2;255;3;0;15;0100
05.04.16 21:56:54	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:56:54	DEBUG	Undefined firmware/type for node=2
05.04.16 21:56:54	INFO	BL version=258
05.04.16 21:56:54	INFO	No FW assigned
05.04.16 21:57:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:01	INFO	BL version=258
05.04.16 21:57:01	INFO	No FW assigned
05.04.16 21:57:07	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:07	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:07	INFO	BL version=258
05.04.16 21:57:07	INFO	No FW assigned
05.04.16 21:57:25	RX	2;255;3;0;15;0100
05.04.16 21:57:32	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:32	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:32	INFO	BL version=258
05.04.16 21:57:32	INFO	No FW assigned
05.04.16 21:57:39	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:39	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:39	INFO	BL version=258
05.04.16 21:57:39	INFO	No FW assigned
05.04.16 21:57:45	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:57:45	DEBUG	Undefined firmware/type for node=2
05.04.16 21:57:45	INFO	BL version=258
05.04.16 21:57:45	INFO	No FW assigned
05.04.16 21:58:03	RX	2;255;3;0;15;0100
05.04.16 21:58:10	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:10	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:10	INFO	BL version=258
05.04.16 21:58:10	INFO	No FW assigned
05.04.16 21:58:16	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:16	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:16	INFO	BL version=258
05.04.16 21:58:16	INFO	No FW assigned
05.04.16 21:58:23	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:23	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:23	INFO	BL version=258
05.04.16 21:58:23	INFO	No FW assigned
05.04.16 21:58:41	RX	2;255;3;0;15;0100
05.04.16 21:58:45	USER	Debug=FALSE
05.04.16 21:58:45	INFO	*** Logging STOP ***
05.04.16 21:58:47	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:47	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:47	INFO	BL version=258
05.04.16 21:58:47	INFO	No FW assigned
05.04.16 21:58:54	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:58:54	DEBUG	Undefined firmware/type for node=2
05.04.16 21:58:54	INFO	BL version=258
05.04.16 21:58:54	INFO	No FW assigned
05.04.16 21:59:01	RX	2;255;4;0;0;FFFFFFFF0800077E0102
05.04.16 21:59:01	DEBUG	Undefined firmware/type for node=2
05.04.16 21:59:01	INFO	BL version=258
05.04.16 21:59:01	INFO	No FW assigned

hope it helps finding out whats wrong ;)

[Fabien]

@tekka I try with build 3312 and working fine with wine
Now I'm looking for I_PRESENTATION. With 2.0 beta it doesn't seem to work. May I use smartSleep ?

[Fabien]

So after few test, wrks fine with I_PRESENTATION request and using smartSleep (with interrupts too).

[n1ck1355]

@tekka : do you have any clue whats wrong with my setup?

[DrJeff]

Does the gateway need the OTA firmware (flashed) written to it as well as the Nodes?

[tekka]

@n1ck1355 yes, probably there is a timing issue with serial uploads. Need to review the STK500 code. Can you confirm that OTA FW updates work fine?

[tekka]

@DrJeff No, only the nodes

[DrJeff]

@tekka Cool thanks, can I use Arduino as ISP to program bootloader?

[tekka]

@DrJeff Yep :)

[DrJeff]

@tekka , Time to try Thanks! :)

[n1ck1355]

@tekka yes ota fw updates works. Tried it with the Time fw

[n1ck1355]

@tekka i musst revert my previous post...
I've OTA uploaded the sketch from my first post:

void setup() {
  Serial.begin(57600);
  Serial.println("Setup Start");
}

void loop() {
}

and i connected the board over Serial with my computer. After uploading the sketch i did not noticed any output on the serial monitor in the Arduino IDE. Also checked the transfer rate.

However the time reporter firmware works fine.

[siklosi]

Is there a way to send ota firmware to node using some cli (python or...) script? I'm using MySensors with domoticz on RPi and when flashing new firmware I usually disconnect gw from rpi plug it into notebook and send fw using MYSController. If I could just disable gw in domoticz and send fw using some script it would be great until (if) domoticz gets support for ota fw.

[rollercontainer]

I've just tried two 3,3V Pro Minis. Flashed the 8MHz MYSBootloader without problems (Nano as ISP). After that I connected the FTDI Adapter and programmed Blink and ReadAnalogVoltage examples without error. Both didn't worked on both Pro Minis. With original Bootloaders, they work.

Where is my fault?

[tekka]

@rollercontainer You have to provide additional information such as logs, etc. for troubleshooting

[Thar0l]

@tekka Serial not working after uploading MYSbootloader v1.3pre. ArduinoProMini 5v16Mhz. Is it normal?

[tekka]

@Алексей-Гусаров please provide additional information such as config and logs.