Inclusion mode not reliably starting



  • I built the ESP8266 wifi gateway and connected it to my Vera. Communication is working fine between them, but the gateway will only intermittently go into inclusion mode. When I click the Start button in Vera, I can see the data being sent to the gateway to start inclusion mode, both in the Vera logs, and in the serial console:

    Client 0: 0;0;3;0;5;1
    
    0;0;3;0;9;read: 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0:
    255;255;3;0;3;
    Client 0: 255;255;3;0;4;58
    
    0;0;3;0;9;send: 0-0-255-255 s=255,c=3,t=4,pt=0,l=2,sg=0,st=bc:58
    Client 0: 0;0;3;0;5;1
    
    

    Sometimes it will go into inclusion mode. But, when it doesn't, I have to reboot the gateway and try again. Sometimes inclusion mode will continue to work for 3 or 4 more tries, or, it will not and I will have to reboot to get it working again.

    Any thoughts? I've tried 2 different radios. One of the normal tiny ones, and then the version of it with the SMA connector and antenna on it. Same results with both.



  • Seems to be fixed. I cleared the EEPROM and reloaded the firmware.


Log in to reply
 

Suggested Topics

  • 3
  • 24
  • 2
  • 4
  • 2
  • 1

23
Online

11.2k
Users

11.1k
Topics

112.5k
Posts