problem getting Id from GW (parent)



  • Hi all,

    I´ve built a NRF24l01 quality meter from AWI, unfortunately I don´t get the node connected to my Gateway. This is what my gateway tells me on the serial output:

    0;255;3;0;9;TSP:MSG:SEND 0-0-250-250 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0
    0;255;3;0;9;TSP:MSG:READ 250-250-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
    0;255;3;0;9;TSP:MSG:BC
    0;255;3;0;9;TSP:MSG:FPAR REQ (sender=250)
    0;255;3;0;9;TSP:CHKUPL:OK
    0;255;3;0;9;TSP:MSG:GWL OK
    

    As far as I understand there is a radio connection, but the node and the gw don´t want to talk to each other. Could anybody help me to understand what is going wrong here please?

    edit: I must mention that it occasionally works, so it must be wired correctly...

    edit2: Output of Node Serial monitor:

    Starting sensor (RNNNA-, 2.0.0)
    TSM:INIT
    TSM:RADIO:OK
    TSP:ASSIGNID:OK (ID=100)
    TSM:FPAR
    TSP:MSG:SEND 100-100-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
    TSP:MSG:READ 0-0-0 s=0,c=0,t=0,pt=0,l=0,sg=0:
    !TSP:MSG:PVER mismatch
    

Log in to reply
 

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.