Gateway in Client Mode and 2 Controller?

[ThomasDr]

Hallo,

can a Gateway in Client Mode connect to 2 Controller?

regards
ThomasD

[hek]

Nope, not possible.

[Corvl]

Just checking if I have the same question, since I am not sure about "client mode".

Is it possible to controll the ethernet gateway with 2 vera's ?

Thanks,
Cor

[FotoFieber]

@Corvl
At least for the internal messages like time and node_id assignment it would be impossible to have multiple gateways.

What about bridging the two veras? http://wiki.micasaverde.com/index.php/Bridged_Mios_Engines

[Corvl]

@ Fotofieber;

I have bridges both vera's. What I want is the other vera ( too far away for a z-wave device) to be able to switch on and off the main vera. ( in case it freezes).

I have now build a second ethernet controller , which is near the main vera. So I was just wondering if I could controll a node ( relais) via the ethernet gateway which is than on both vera's.

Cor

[LastSamurai]

Well as far as I understand it you can use MQTT (and the MQTT gateway) with serveral controllers as long as they can understand MQTT.

[FotoFieber]

@LastSamurai
As long as the veras don't try to be the main controller at the same time.