req node id again

[Daemon D]

1. IDE 1.6.1
2. Lib 1.4.1
3. Vera Lite + usb hub (ext. power D-Link) + Arduino nano serial + NRF24L01 + PA + capacitor
4. NEW repeater (or node) Arduino nano (New but have never been used) + NRF24L01 + PA + capacitor 47 mf <- trable
5. Arduino nano + NRF24L01 + PA + capacitor <- repeater altid 3;255
6. More ardiuno nano nodes, working fine

When I try to teach the base of the new node, get the error (Any loaded standard program for node):

send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
read: 3-3-255 s=255,c=3,t=7,pt=0,l=0:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
repeater started, id 255
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
req node id
send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:

EEPROM clear did
This NRF24L01 + PA worked before on another node
When I load the program to work with radio module - it works :code
What is the can be a problem?

[Daemon D]

@Daemon-D solved the problem by cleaning the routing table in 3 repeater

[Mouridsen]

@Daemon-D: Do you mean using the "Clear" button for the child nodes in Vera?? I have the same issue.

[Daemon D]

@Mouridsen said:

Do you mean using the "Clear" button for the child nodes in Vera?? I have the same issue.

Yes