Hi, I thought I would share my newest project with you Guys.
This project is a multisensory, containing a relay and a motion sensor.

The project is powered by 230V and has a small 5V power supply in the box as well.
What I used:
HC-SR501 PIR
1 channel relay
Arduino Pro Mini 5V
NRF24L01+
AMS1117 5V-3.3V Step Down Module
1A 5V Power Supply from Ebay

Code:
MultiSensor_Relay_Motion.ino

Pictures:

The Multisensor is used in my basement room, and turns on the light if there is motion, when I enter the room.
The logic is made by PLEG on a Vera3

@ServiceXp @hek Here just a little update

I have now glued all parts to the box, and added a plastic cover over the part with 230V

so now nothing should be able to touch and it looks a bit nicer.

Hi
Its been a long time since I made something Mysensors.

But now I made my first WIFI node with led dimmer. Using the ESP8266 NodeMCU.

I use the VeraPlus and made a new Mysensors Device, and put in the IP of the NodeMCU.

This is not my last wifi node. I am thinking of making a motion/temp sensor next :-)

and the box.

Hi I have made a wall controller, but I'm using S_LIGHT as presentation. Is it possible to make it as S_SCENECONTROLLER1 insted. Then I only have one device and the node, insted of as now 4 devices and a node?

I dont know if it possible. What I want is to make is a MySensor device that acts like a scene controller.

Regards dalhoj

Maybe for floor heating, then you dont have to place anything on the floor, and can have a thermostat on the wall, but messure on the floor.