Best posts made by Mr_sensor

Mr_sensor

Great! That helped a lot. I Kicked that out when reading the Converting a sketch from 1.5 to 2.x article.

4911 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:20.4
4954 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:50.2
4962 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
4968 MCO:SLP:TPD

Now I only have to find out what to use for mqtt to read this sensor values. Thats still not very clear to me:
Guess it would be something like:
mygateway1-out/2/2/0/0/ or 2/2/0/0/1 ?

Would it be possible to have something like this:

mygateway-out/2/2/Temperature ?

Mr_sensor

@sundberg84 Well I tried that but did not get the measurement straight from the pcb si I decided t solder a new board using the right capacitor this time (0,1uf instead of 1uf) made sure using the right resistors as well and adding a capacitor after the booster. Than with the same mini pro from the other board tested again and wow it is working as intended.

Child ID 2Battery Voltage: 3.44 V
Battery Percent: 102 %
2930 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=0,pt=1,l=1,sg=0,ft=0,st=OK:102
2938 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
2945 TSF:TDI:TSL
2947 MCO:SLP:WUP=-1
2949 TSF:TRI:TSB
3065 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
3178 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
957
Child ID 2Battery Voltage: 3.22 V
Battery Percent: 95 %
3690 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=0,pt=1,l=1,sg=0,ft=0,st=OK:95
3698 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
3704 TSF:TDI:TSL
3706 MCO:SLP:WUP=-1
3708 TSF:TRI:TSB
3815 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
3932 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
955
Child ID 2Battery Voltage: 3.21 V
Battery Percent: 95 %
4442 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
4452 TSF:TDI:TSL
4454 MCO:SLP:WUP=-1
4456 TSF:TRI:TSB
4560 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
4673 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
953
Child ID 2Battery Voltage: 3.21 V
Battery Percent: 95 %
5185 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
5193 TSF:TDI:TSL
5195 MCO:SLP:WUP=-1
5197 TSF:TRI:TSB
5304 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
5416 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
952
Child ID 2Battery Voltage: 3.20 V
Battery Percent: 95 %
5926 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
5935 TSF:TDI:TSL
5939 MCO:SLP:WUP=-1
5941 TSF:TRI:TSB
6045 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
6158 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
952
Child ID 2Battery Voltage: 3.20 V
Battery Percent: 95 %
6670 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
6678 TSF:TDI:TSL
6680 MCO:SLP:WUP=-1
6682 TSF:TRI:TSB
6789 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
6901 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
952
Child ID 2Battery Voltage: 3.20 V
Battery Percent: 95 %
7411 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
7419 TSF:TDI:TSL
7424 MCO:SLP:WUP=-1
7426 TSF:TRI:TSB
7530 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
7643 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
952
Child ID 2Battery Voltage: 3.20 V
Battery Percent: 95 %
8155 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
8163 TSF:TDI:TSL
8165 MCO:SLP:WUP=-1
8167 TSF:TRI:TSB
8273 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
8388 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
955
Child ID 2Battery Voltage: 3.21 V
Battery Percent: 95 %
8898 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
8908 TSF:TDI:TSL
8910 MCO:SLP:WUP=-1
8912 TSF:TRI:TSB
9021 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
9132 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
948
Child ID 2Battery Voltage: 3.19 V
Battery Percent: 94 %
9646 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=0,pt=1,l=1,sg=0,ft=0,st=OK:94
9654 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
9660 TSF:TDI:TSL
9662 MCO:SLP:WUP=-1
9664 TSF:TRI:TSB
9771 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
9881 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
952
Child ID 2Battery Voltage: 3.20 V
Battery Percent: 95 %
10395 TSF:MSG:SEND,2-2-0-0,s=255,c=3,t=0,pt=1,l=1,sg=0,ft=0,st=OK:95
10403 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
10409 TSF:TDI:TSL
10412 MCO:SLP:WUP=-1
10414 TSF:TRI:TSB
10520 TSF:MSG:SEND,2-2-0-0,s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=OK:998.0
T: 998.00
10635 TSF:MSG:SEND,2-2-0-0,s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=OK:998.0
H: 998.00
953
Child ID 2Battery Voltage: 3.21 V
Battery Percent: 95 %
11147 MCO:SLP:MS=60000,SMS=0,I1=255,M1=255,I2=255,M2=255
11155 TSF:TDI:TSL

Now in mqtt I can see the percentage as:

95
qos : 0, retain : false, cmd : publish, dup : false, topic : **mygateway1-out/2/255/3/0/0**, messageId : , length : 30, Raw payload : 5753```

But not the voltage?

Mr_sensor

@mfalkvidd said in What is loaded / running on the arduino?:

@mr_sensor you are correct that it is not possible to get the sketch from the Arduino.

But all MySensors sketches have something like this:
sendSketchInfo("TemperatureAndHumidity", "1.1");
which identifies which type of sketch and the version of that sketch, every time the sensor is restarted. If you store your sketches in some version control system (git is most popular), keeping track of them becomes quite easy.

See also https://forum.mysensors.org/topic/2203/method-to-reveal-sketch-inside-node-or-g-w for an earlier discussion on a similar topic.

@mfalkvidd thanks for the reply. The sendSketchInfo is indeed helpfull will also read the link.