Bug Reports

@hek That was very visible, please excuse my ignorance. Even though I have looked at this page I managed to leave the change unnoticed.

@hek said: @noelgeorgi said: http://forum.arduino.cc/index.php?topic=101104.0 This solution adds zero security. Password is transported unencrypted over the network. It provide negative security. Such a piss poor solution actually makes existing security weaker. And potentially compromises the entire system. :-1:

@Francois I have the same issue and my gateway freeze even with node sending temperature. I read something about 2 capacitors : one chemical 4.7uF and a non polarized around 10nF, I'll try it soon. I don't have 10uF or higher as @drock1985 mentioned to test. Do you ?

Excellent, it worked

I'm sorry for that ;) It works perfectly after the library update thank you very much @sundberg84

Hi @doblanch! This issue was resolved in 1.5 and if you are using 1.5 you should do fine! My repeaters use 1.5 and works great.

@hek said: That's plain wrong. Created a PR here: https://github.com/mysensors/Arduino/pull/316 Thank you @hek !!

Just what I need - many thanks!

@Yveaux said: @Oitzu isn't that the same as I'm saying? Yes... i misread your post in a way that you suggest he needs to built a multicore system to achive that... i'm sorry. :/

Thanks a lot - that did the trick! Ran a few tests for comparison and its a lot smaller. API 1.4 - IDE 1.6.5 Sketch uses 14,324 bytes (99%) of program storage space. Maximum is 14,336 bytes. API 1.5 IDE 1.6.5 Sketch uses 14,504 bytes (101%) of program storage space. Maximum is 14,336 bytes. API 1.6 dev IDE 1.6.5 Sketch uses 12,240 bytes (85%) of program storage space. Maximum is 14,336 bytes.

Add the string debug print.

Maybe its broke.... The China stuff is not everytime the same quality :D Do you have another one?

You might have an old version of the MySensors library among your codebender private libraries. Remove it and re-clone sketch.

Ok, think this functionality was removed when the blinking stuff was incorporated into the library.

You don't need to upgrade to 1.5, you can simply download the sketch from here https://github.com/mysensors/Arduino/tree/development/libraries/MySensors/examples/PressureSensor

Thank for the reply, but i already found the problem, i was using an old IDE, i installed the last version and it fixed the problem

@b0rmann it's a compilation error, you must add the following lines before #include <MySensor.h> : #include <MyTransportNRF24.h> #include <MyHwATMega328.h>