My Ugly ESP GW Prototype

[hek]

@scalz said:

Huzzah esp8266

Yes, Huzzah seems nice. But I bought a couple of these (which includes an esp-07):
http://www.ebay.com/itm/141656822263?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[hitosnap]

All ESP stuff info http://tech.scargill.net/ ESP12E or ESP13 .

[Didi]

I knowMr Scargills techblog very long and it´s really good ;-)

[tbowmo]

@hek

Do you have some more details on that level converter thingie that you've used between the arduino, and the ESP8266?

[hek]

I used this one:

http://www.ebay.com/itm/181572335264?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[Moshe Livne]

@hek what is the thing the nrf is sitting on? what is the esp for? and if this is ugly, you should see some of my stuff.... it is almost neat....

[hek]

@Moshe-Livne

Te radio is sitting on a (slightly modified) NRF-socket adapter plate as I didn't have any AMS step downs laying around.
http://www.ebay.com/itm/Socket-Adapter-plate-Board-for-8Pin-NRF24L01-Wireless-Transceive-module-51-/200960749614?pt=LH_DefaultDomain_0&hash=item2eca31b02e

The ESP is there to create a wireless connection to the controller (PoC).

[tekka]

@hek said:

Waiting with interest on results from the community members trying to port MySensors library running natively on ESP.

I'm running the GW sketch (and repeater node) natively on the ESP8266 - however, the porting needs some additional work on EEPROM handling and pointer addressing. Also, a stable power supply is important (>3.1V with ESP8266 and NRF24 attached, no peaks). Will post more as porting progresses.

[Mickey]

@tekka said:

@hek said:

Waiting with interest on results from the community members trying to port MySensors library running natively on ESP.

I'm running the GW sketch (and repeater node) natively on the ESP8266 - however, the porting needs some additional work on EEPROM handling and pointer addressing. Also, a stable power supply is important (>3.1V with ESP8266 and NRF24 attached, no peaks). Will post more as porting progresses.

Do you porting it to Arduino environment or using the native esp sdk ?

[A Former User]

Would also be interested to have MySensors on ESP8266 "native" (without Arduino) using the Arduino IDE. This is what you are planning to do ?

[BulldogLowell]

I'll donate a Photon to someone who can port the ethernet gateway over to Particle!!!

@hek ?? WE SHOULD BE ABLE TO ADD A LOT OF FUNCTIONALITY WITH THIS LITTLE POWERHOUSE

128KB RAM
120MHZ

[epierre]

I already have one, thanx !

guy, I had the same idea, and the photon is a beast (when you make it work for I was an alpha alpha tester...)

[epierre]

@BulldogLowell someone already ported the nrf24l library here: https://community.particle.io/t/request-answered-nrf24l01-library/2286

[NeverDie]

Have you guys seen this? http://www.seeedstudio.com/depot/EMW3165-CortexM4-based-WiFi-SoC-Module-p-2488.html
The specs seem almost the same as the Photon's, but it's less than half the price. And, it's in stock.

I'm open minded. Is there a reason to prefer the Photon?

[tbowmo]

@NeverDie

Looks interesting. However, it's probably a bit more complicated to use for newcommers, as it's not arduino compatible (not yet anyways).

[NeverDie]

@tbowmo said:

@NeverDie

Looks interesting. However, it's probably a bit more complicated to use for newcommers, as it's not arduino compatible (not yet anyways).

Good point. Also, the Photon already has header pins soldered on, and not having that means extra work.

I think I'm persuaded that, at least for now, the Photon can justify its higher price.

What's the best board to dock it into? Or is it simply roll-you-own with female headers on some prototyping board?

Sparkfun will have a Photon redboard, but at $39.95....

[tbowmo]

@NeverDie

Is Photon compatible with Arduino? (the build eco system). That is one of the key elements of mysensors at the moment, and what makes it accessible for newcommers.

If not then everything needs to be ported to another build system..

[BulldogLowell]

@tbowmo said:

Is Photon compatible with Arduino?

It is "Arduino-like" for sure, but a little different in that it's implementation is still developing. I've done a few projects with Photon, including (vera controlled) LED projects and sensors. There are some differences so you may find it rough at first (particularly with the availability of Libraries).

Probably a great add-on to your sensor network if you are more experienced with Arduino.

Like MySensors, they have a terrific forum!

PS, comparable to the EMW3165, the P1 version of photon is $10

[NeverDie]

@tbowmo said:

@NeverDie

Is Photon compatible with Arduino? (the build eco system). That is one of the key elements of mysensors at the moment, and what makes it accessible for newcommers.

If not then everything needs to be ported to another build system..

Glad you brought this up.

[rvendrame]

@tekka said:

I'm running the GW sketch (and repeater node) natively on the ESP8266 - however, the porting needs some additional work on EEPROM handling and pointer addressing. Also, a stable power supply is important (>3.1V with ESP8266 and NRF24 attached, no peaks). Will post more as porting progresses.

Would mind to share your sketch for the ESP8266 + WiFi+GW + nRF24 ? If I understood correctly --- the ESP can run the mySensors GW + regular Wi-fi, replacing the arduino? Any other downside than the EEPROM ?

Thanks!