Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor
  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. My Project
  3. Binary Control Modules , Switches, or Outlets on a Vera Edge

Binary Control Modules , Switches, or Outlets on a Vera Edge

Scheduled Pinned Locked Moved My Project
sensor
33 Posts 4 Posters 13.8k Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • mntlvrM mntlvr

    @BulldogLowell I tried your sketch, had to put in the digitalwrite(i,HIGH), but even then it would only find 5 of the 7 nodes it needed, Switch 3-8 and the Arduino Node. I will see later what is going on because it should have worked .

    BulldogLowellB Offline
    BulldogLowellB Offline
    BulldogLowell
    Contest Winner
    wrote on last edited by BulldogLowell
    #5

    @mntlvr,

    so this single line of code:

    pinMode(myPin, INPUT_PULLUP);

    is identical to these two lines of code:

    pinMode(myPin, INPUT);
digitalWrite(myPin, HIGH);

    try adding some hold time to make sure your radio has enough power to transmit:

    void setup() 
{
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    msg[i] = MyMessage(i, V_TRIPPED); 
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(75); //<<<<<<<<<<<<<<<<<<<<<< here
  }
}
    mntlvrM 2 Replies Last reply
    0
    • BulldogLowellB BulldogLowell

      @mntlvr,

      so this single line of code:

      pinMode(myPin, INPUT_PULLUP);

      is identical to these two lines of code:

      pinMode(myPin, INPUT);
digitalWrite(myPin, HIGH);

      try adding some hold time to make sure your radio has enough power to transmit:

      void setup() 
{
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    msg[i] = MyMessage(i, V_TRIPPED); 
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(75); //<<<<<<<<<<<<<<<<<<<<<< here
  }
}
      mntlvrM Offline
      mntlvrM Offline
      mntlvr
      wrote on last edited by
      #6

      @BulldogLowell , You are so correct the two lines of code mean exactly the same, thank you for pointing that out, so wo I will try this code again and I will try my modified code and see what happens. Now both should work but your code is more Nano or Pro-Mini friendly when it comes to memory.

      1 Reply Last reply
      0
      • BulldogLowellB BulldogLowell

        @mntlvr,

        so this single line of code:

        pinMode(myPin, INPUT_PULLUP);

        is identical to these two lines of code:

        pinMode(myPin, INPUT);
digitalWrite(myPin, HIGH);

        try adding some hold time to make sure your radio has enough power to transmit:

        void setup() 
{
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    msg[i] = MyMessage(i, V_TRIPPED); 
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(75); //<<<<<<<<<<<<<<<<<<<<<< here
  }
}
        mntlvrM Offline
        mntlvrM Offline
        mntlvr
        wrote on last edited by
        #7

        @BulldogLowell
        I tried the code again but it still only finds 0-4 delay made no difference. Also I don't follow your code for changing the msg so it shows 1,2,3,4,5,6 tripped could use a little visual help on this also. I am trying to trap the condition that is preventing it from running 0-5 instead of 0-4.
        Thanks

        BulldogLowellB 1 Reply Last reply
        0
        • mntlvrM mntlvr

          @BulldogLowell
          I tried the code again but it still only finds 0-4 delay made no difference. Also I don't follow your code for changing the msg so it shows 1,2,3,4,5,6 tripped could use a little visual help on this also. I am trying to trap the condition that is preventing it from running 0-5 instead of 0-4.
          Thanks

          BulldogLowellB Offline
          BulldogLowellB Offline
          BulldogLowell
          Contest Winner
          wrote on last edited by
          #8

          @mntlvr

          use some serial debug messages like this to see what's what:

          #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(100);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
          mntlvrM 2 Replies Last reply
          0
          • BulldogLowellB BulldogLowell

            @mntlvr

            use some serial debug messages like this to see what's what:

            #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(100);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
            mntlvrM Offline
            mntlvrM Offline
            mntlvr
            wrote on last edited by
            #9

            @BulldogLowell
            Bulldog I ran your debug code and here is the 6th irratition of the Serial Monitor on IDE ver 1.6.4

            • sensor started, id 32
              send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
              send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
              send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=fail:RemoteControl
              send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=fail:1.05
              Setting up Pin0
              send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
              Setting up Pin1
              send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
              Setting up Pin2
              send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
              send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
              Setting up Pin3
              send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
              Setting up Pin4
              send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
              Setting up Pin5
              send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
              version mismatch
              Sensor presentation complete
              send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
              Pin 3 changed state... New State: Tripped
              send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
              Pin 4 changed state... New State: Tripped
              send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
              Pin 5 changed state... New State: Tripped
              send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
              Pin 0 changed state... New State: Tripped
              send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
              Pin 1 changed state... New State: Tripped
              send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
              Pin 2 changed state... New State: Tripped
            1 Reply Last reply
            0
            • BulldogLowellB BulldogLowell

              @mntlvr

              use some serial debug messages like this to see what's what:

              #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(100);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
              mntlvrM Offline
              mntlvrM Offline
              mntlvr
              wrote on last edited by
              #10

              @BulldogLowell
              Connected pin 5 to ground and reset Serial Monitor windows and this is the results

              • sensor started, id 32
                send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
                send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
                send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=fail:RemoteControl
                send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=fail:1.08
                Setting up Pin0
                send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
                Setting up Pin1
                send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
                Setting up Pin2
                send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
                send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
                Setting up Pin3
                send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                Setting up Pin4
                send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                Setting up Pin5
                send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                Sensor presentation complete
                send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 3 changed state... New State: Tripped
                send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 4 changed state... New State: Tripped
                send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 0 changed state... New State: Tripped
                send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 1 changed state... New State: Tripped
                send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 2 changed state... New State: Tripped

              This is as far as the code went..

              1 Reply Last reply
              0
              • BulldogLowellB Offline
                BulldogLowellB Offline
                BulldogLowell
                Contest Winner
                wrote on last edited by
                #11

                @mntlvr said:

                This is as far as the code went..

                you would need to flip the switches to see anything else :) so try that.

                this is a problem:

                Setting up Pin0
send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin1
send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin2
send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
Setting up Pin3
send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:

                let's slow down the startup... it looks like your initial radio messages are not making it to the gateway.

                #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
                mntlvrM 1 Reply Last reply
                0
                • rvendrameR Offline
                  rvendrameR Offline
                  rvendrame
                  Hero Member
                  wrote on last edited by
                  #12

                  How are you powering the node? Is there any capacitor between radio VCC / GND? If you have an spare radio/power supply try replacing them. Make sure radio gets stable, 1.9-3.6V supply.

                  And check this thread. Many of us are experiencing random results from fake radios...

                  Home Assistant / Vera Plus UI7
                  ESP8266 GW + mySensors 2.3.2
                  Alexa / Google Home

                  1 Reply Last reply
                  0
                  • BulldogLowellB BulldogLowell

                    @mntlvr said:

                    This is as far as the code went..

                    you would need to flip the switches to see anything else :) so try that.

                    this is a problem:

                    Setting up Pin0
send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin1
send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin2
send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
Setting up Pin3
send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:

                    let's slow down the startup... it looks like your initial radio messages are not making it to the gateway.

                    #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
                    mntlvrM Offline
                    mntlvrM Offline
                    mntlvr
                    wrote on last edited by
                    #13

                    @BulldogLowell Ok Bulldog ran new code still getting Version Mismatch?and at the beginning fails.
                    My transceiver is about 4 feet away from the gateway.

                    • .sensor started, id 32
                      send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
                      send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
                      send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=fail:RemoteControl
                      send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=fail:1.05
                      Setting up Pin0
                      send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
                      Setting up Pin1
                      send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
                      Setting up Pin2
                      send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
                      send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
                      Setting up Pin3
                      send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                      Setting up Pin4
                      0;0;3;0;9;send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      Setting up Pin5
                      0;0;3;0;9;send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      Sensor presentation complete
                      0;0;3;0;9;send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
                      Pin 3 changed state... New State: Tripped
                      0;0;3;0;9;send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
                      Pin 4 changed state... New State: Tripped
                      0;0;3;0;9;send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                      Pin 5 changed state... New State: Tripped
                      0;0;3;0;9;send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
                      Pin 0 changed state... New State: Tripped
                      0;0;3;0;9;send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
                      Pin 1 changed state... New State: Tripped
                      0;0;3;0;9;send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
                      Pin 2 changed state... New State: Tripped
                    1 Reply Last reply
                    0
                    • BulldogLowellB Offline
                      BulldogLowellB Offline
                      BulldogLowell
                      Contest Winner
                      wrote on last edited by
                      #14

                      @mntlvr said:

                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                      Setting up Pin5
                      0;0;3;0;9;send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                      version mismatch
                      read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:

                      yeah, this isn't what I would expect, but maybe hardware related... look here.

                      Power is my first instinct.

                      @hek any ideas here?

                      also, you didn't try flipping the switches!

                      mntlvrM 1 Reply Last reply
                      0
                      • hekH Offline
                        hekH Offline
                        hek
                        Admin
                        wrote on last edited by
                        #15

                        Message seems corrupt... command-type=5!!

                        Underpowered or some strange mix of different radio-modules.

                        mntlvrM 2 Replies Last reply
                        0
                        • BulldogLowellB BulldogLowell

                          @mntlvr said:

                          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                          Setting up Pin5
                          0;0;3;0;9;send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                          read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                          version mismatch
                          read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                          version mismatch
                          read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                          version mismatch
                          read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                          version mismatch
                          read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:

                          yeah, this isn't what I would expect, but maybe hardware related... look here.

                          Power is my first instinct.

                          @hek any ideas here?

                          also, you didn't try flipping the switches!

                          mntlvrM Offline
                          mntlvrM Offline
                          mntlvr
                          wrote on last edited by
                          #16

                          @BulldogLowell Bulldog
                          The power is coming from 2 LIPO 1500mAH batteries in series, so the boards input voltage is 8.4 volts which the on board regulator is handling on the 24l01 so the nRF24l01 is getting 3.3 volts one 22ufd caps on input right on nrf24l01 board. I am running the exact setup my first board is using when I built it on a Nano. On the Nano build when I would ground anyone of the input pin the Vera would show the state of change right away and so would the Serial Monitor on IDE. I will keep on it until I resolve it.

                          1 Reply Last reply
                          0
                          • hekH hek

                            Message seems corrupt... command-type=5!!

                            Underpowered or some strange mix of different radio-modules.

                            mntlvrM Offline
                            mntlvrM Offline
                            mntlvr
                            wrote on last edited by
                            #17

                            @hek All the radio modules are nRF24l01+ and I have 3 other sensors all working just fine with this gateway all using the same transceiver from the same company.

                            1 Reply Last reply
                            0
                            • hekH hek

                              Message seems corrupt... command-type=5!!

                              Underpowered or some strange mix of different radio-modules.

                              mntlvrM Offline
                              mntlvrM Offline
                              mntlvr
                              wrote on last edited by
                              #18

                              @hek this is the Serial Monitor output from the same board powered the same way except running my original code and no failures.

                              You can see when I gnd the input the output responds.
                              sensor started, id 32
                              send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
                              send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
                              send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl
                              send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.05
                              send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=6,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=7,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=8,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=3,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=4,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=6,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=7,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=8,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0

                              BulldogLowellB 1 Reply Last reply
                              0
                              • hekH Offline
                                hekH Offline
                                hek
                                Admin
                                wrote on last edited by
                                #19

                                I suspect the message array is doing some buffer overwrite.

                                Just define one msg and reuse it with
                                msg.setSensor(x)

                                1 Reply Last reply
                                1
                                • BulldogLowellB Offline
                                  BulldogLowellB Offline
                                  BulldogLowell
                                  Contest Winner
                                  wrote on last edited by
                                  #20

                                  @hek said:

                                  I suspect the message array is doing some buffer overwrite.

                                  Just define one msg and reuse it with
                                  msg.setSensor(x)

                                  agree...

                                  look here:

                                  Sensor presentation complete
0;0;3;0;9;send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
Pin 3 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
Pin 4 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
Pin 5 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
Pin 0 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
Pin 1 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
Pin 2 changed state... New State: Tripped

                                  not winding its way through the array like you wold expect.

                                  1 Reply Last reply
                                  0
                                  • mntlvrM mntlvr

                                    @hek this is the Serial Monitor output from the same board powered the same way except running my original code and no failures.

                                    You can see when I gnd the input the output responds.
                                    sensor started, id 32
                                    send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
                                    send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
                                    send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl
                                    send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.05
                                    send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok:
                                    send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                                    send: 32-32-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                                    send: 32-32-0-0 s=6,c=0,t=0,pt=0,l=0,st=ok:
                                    send: 32-32-0-0 s=7,c=0,t=0,pt=0,l=0,st=ok:
                                    send: 32-32-0-0 s=8,c=0,t=0,pt=0,l=0,st=ok:
                                    send: 32-32-0-0 s=3,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=4,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=6,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=7,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=8,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                                    send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0

                                    BulldogLowellB Offline
                                    BulldogLowellB Offline
                                    BulldogLowell
                                    Contest Winner
                                    wrote on last edited by
                                    #21

                                    @mtnlvr

                                    like this perhaps:

                                    #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg(0,V_TRIPPED);

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      msg.setSensor(i);
      gw.send(msg.set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
                                    mntlvrM 1 Reply Last reply
                                    0
                                    • BulldogLowellB BulldogLowell

                                      @mtnlvr

                                      like this perhaps:

                                      #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg(0,V_TRIPPED);

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      msg.setSensor(i);
      gw.send(msg.set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
                                      mntlvrM Offline
                                      mntlvrM Offline
                                      mntlvr
                                      wrote on last edited by
                                      #22

                                      @BulldogLowell
                                      This seems to work much better but what is the "version mismatch"?
                                      You can see the change of pin 5 now immediately now when I connect it to gnd or leave it open.

                                      Sending device info...sensor started, id 32
                                      send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
                                      send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
                                      read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I
                                      send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl
                                      send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15
                                      Setting up Pin0
                                      send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok:
                                      Setting up Pin1
                                      send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok:
                                      Setting up Pin2
                                      send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok:
                                      Setting up Pin3
                                      send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                      Setting up Pin4
                                      send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                      Setting up Pin5
                                      send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                      version mismatch
                                      Sensor presentation complete
                                      send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 3 changed state... New State: Tripped
                                      send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 4 changed state... New State: Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 5 changed state... New State: Tripped
                                      send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 0 changed state... New State: Tripped
                                      send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 1 changed state... New State: Tripped
                                      send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 2 changed state... New State: Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                      Pin 5 changed state... New State: Not Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 5 changed state... New State: Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                      Pin 5 changed state... New State: Not Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 5 changed state... New State: Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                      Pin 5 changed state... New State: Not Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 5 changed state... New State: Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                      Pin 5 changed state... New State: Not Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                      Pin 5 changed state... New State: Tripped
                                      send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                      Pin 5 changed state... New State: Not Tripped

                                      1 Reply Last reply
                                      0
                                      • hekH Offline
                                        hekH Offline
                                        hek
                                        Admin
                                        wrote on last edited by
                                        #23

                                        You seem to have radio disturbance (or the nodes radio get wacky when gateway sends its ack...).

                                        I think I have similar things when underpowering my gateway and sending with full power on a amplified nrf-module.

                                        mntlvrM 1 Reply Last reply
                                        0
                                        • hekH hek

                                          You seem to have radio disturbance (or the nodes radio get wacky when gateway sends its ack...).

                                          I think I have similar things when underpowering my gateway and sending with full power on a amplified nrf-module.

                                          mntlvrM Offline
                                          mntlvrM Offline
                                          mntlvr
                                          wrote on last edited by mntlvr
                                          #24

                                          @hek I just re-ran my Serial Monitor and now pin 5 only shows "version mismatch" I don't know how else to power any of these units because I have a 9 vdc 1 amp power pack on the Gateway and my sensors all have 1 amp, 9 vdc power packs

                                          BulldogLowellB 1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes

                                          18

                                          Online

                                          11.7k

                                          Users

                                          11.2k

                                          Topics

                                          113.1k

                                          Posts


                                          Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                          • Login
                                          • Don't have an account? Register
                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • MySensors
                                          • OpenHardware.io
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular