Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor
  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. My Project
  3. Binary Control Modules , Switches, or Outlets on a Vera Edge

Binary Control Modules , Switches, or Outlets on a Vera Edge

Scheduled Pinned Locked Moved My Project
sensor
33 Posts 4 Posters 13.8k Views 2 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • mntlvrM mntlvr

    @BulldogLowell
    I tried the code again but it still only finds 0-4 delay made no difference. Also I don't follow your code for changing the msg so it shows 1,2,3,4,5,6 tripped could use a little visual help on this also. I am trying to trap the condition that is preventing it from running 0-5 instead of 0-4.
    Thanks

    BulldogLowellB Offline
    BulldogLowellB Offline
    BulldogLowell
    Contest Winner
    wrote on last edited by
    #8

    @mntlvr

    use some serial debug messages like this to see what's what:

    #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(100);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
    mntlvrM 2 Replies Last reply
    0
    • BulldogLowellB BulldogLowell

      @mntlvr

      use some serial debug messages like this to see what's what:

      #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(100);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
      mntlvrM Offline
      mntlvrM Offline
      mntlvr
      wrote on last edited by
      #9

      @BulldogLowell
      Bulldog I ran your debug code and here is the 6th irratition of the Serial Monitor on IDE ver 1.6.4

      • sensor started, id 32
        send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
        send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
        send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=fail:RemoteControl
        send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=fail:1.05
        Setting up Pin0
        send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
        Setting up Pin1
        send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
        Setting up Pin2
        send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
        send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
        Setting up Pin3
        send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
        Setting up Pin4
        send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
        Setting up Pin5
        send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        read: 48-201-0 s=0,c=5,t=0,pt=0,l=0:
        version mismatch
        Sensor presentation complete
        send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
        Pin 3 changed state... New State: Tripped
        send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
        Pin 4 changed state... New State: Tripped
        send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
        Pin 5 changed state... New State: Tripped
        send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
        Pin 0 changed state... New State: Tripped
        send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
        Pin 1 changed state... New State: Tripped
        send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
        Pin 2 changed state... New State: Tripped
      1 Reply Last reply
      0
      • BulldogLowellB BulldogLowell

        @mntlvr

        use some serial debug messages like this to see what's what:

        #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  gw.begin();
  gw.sendSketchInfo("RemoteControl", "1.05");
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(100);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
        mntlvrM Offline
        mntlvrM Offline
        mntlvr
        wrote on last edited by
        #10

        @BulldogLowell
        Connected pin 5 to ground and reset Serial Monitor windows and this is the results

        • sensor started, id 32
          send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
          send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
          send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=fail:RemoteControl
          send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=fail:1.08
          Setting up Pin0
          send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
          Setting up Pin1
          send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
          Setting up Pin2
          send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
          send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
          Setting up Pin3
          send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
          Setting up Pin4
          send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
          Setting up Pin5
          send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          read: 50-219-0 s=0,c=5,t=0,pt=0,l=0:
          version mismatch
          Sensor presentation complete
          send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
          Pin 3 changed state... New State: Tripped
          send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
          Pin 4 changed state... New State: Tripped
          send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
          Pin 0 changed state... New State: Tripped
          send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
          Pin 1 changed state... New State: Tripped
          send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
          Pin 2 changed state... New State: Tripped

        This is as far as the code went..

        1 Reply Last reply
        0
        • BulldogLowellB Offline
          BulldogLowellB Offline
          BulldogLowell
          Contest Winner
          wrote on last edited by
          #11

          @mntlvr said:

          This is as far as the code went..

          you would need to flip the switches to see anything else :) so try that.

          this is a problem:

          Setting up Pin0
send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin1
send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin2
send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
Setting up Pin3
send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:

          let's slow down the startup... it looks like your initial radio messages are not making it to the gateway.

          #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
          mntlvrM 1 Reply Last reply
          0
          • rvendrameR Offline
            rvendrameR Offline
            rvendrame
            Hero Member
            wrote on last edited by
            #12

            How are you powering the node? Is there any capacitor between radio VCC / GND? If you have an spare radio/power supply try replacing them. Make sure radio gets stable, 1.9-3.6V supply.

            And check this thread. Many of us are experiencing random results from fake radios...

            Home Assistant / Vera Plus UI7
            ESP8266 GW + mySensors 2.3.2
            Alexa / Google Home

            1 Reply Last reply
            0
            • BulldogLowellB BulldogLowell

              @mntlvr said:

              This is as far as the code went..

              you would need to flip the switches to see anything else :) so try that.

              this is a problem:

              Setting up Pin0
send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin1
send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
Setting up Pin2
send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
Setting up Pin3
send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:

              let's slow down the startup... it looks like your initial radio messages are not making it to the gateway.

              #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg[NUMBER_OF_PINS]; //= {MyMessage(0,V_TRIPPED),MyMessage(1,V_TRIPPED),MyMessage(2,V_TRIPPED),MyMessage(3,V_TRIPPED),MyMessage(4,V_TRIPPED),MyMessage(5,V_TRIPPED)};

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    msg[i] = MyMessage(i, V_TRIPPED); // instead of this
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      gw.send(msg[i].set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
              mntlvrM Offline
              mntlvrM Offline
              mntlvr
              wrote on last edited by
              #13

              @BulldogLowell Ok Bulldog ran new code still getting Version Mismatch?and at the beginning fails.
              My transceiver is about 4 feet away from the gateway.

              • .sensor started, id 32
                send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=fail:1.4.1
                send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
                send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=fail:RemoteControl
                send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=fail:1.05
                Setting up Pin0
                send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=fail:
                Setting up Pin1
                send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=fail:
                Setting up Pin2
                send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=fail:
                send: 32-32-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
                Setting up Pin3
                send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=fail:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                Setting up Pin4
                0;0;3;0;9;send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                Setting up Pin5
                0;0;3;0;9;send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                Sensor presentation complete
                0;0;3;0;9;send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 3 changed state... New State: Tripped
                0;0;3;0;9;send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 4 changed state... New State: Tripped
                0;0;3;0;9;send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 5 changed state... New State: Tripped
                0;0;3;0;9;send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 0 changed state... New State: Tripped
                0;0;3;0;9;send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 1 changed state... New State: Tripped
                0;0;3;0;9;send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
                Pin 2 changed state... New State: Tripped
              1 Reply Last reply
              0
              • BulldogLowellB Offline
                BulldogLowellB Offline
                BulldogLowell
                Contest Winner
                wrote on last edited by
                #14

                @mntlvr said:

                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                Setting up Pin5
                0;0;3;0;9;send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                version mismatch
                read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:

                yeah, this isn't what I would expect, but maybe hardware related... look here.

                Power is my first instinct.

                @hek any ideas here?

                also, you didn't try flipping the switches!

                mntlvrM 1 Reply Last reply
                0
                • hekH Offline
                  hekH Offline
                  hek
                  Admin
                  wrote on last edited by
                  #15

                  Message seems corrupt... command-type=5!!

                  Underpowered or some strange mix of different radio-modules.

                  mntlvrM 2 Replies Last reply
                  0
                  • BulldogLowellB BulldogLowell

                    @mntlvr said:

                    read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                    read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                    read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                    Setting up Pin5
                    0;0;3;0;9;send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                    read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                    version mismatch
                    read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                    version mismatch
                    read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                    version mismatch
                    read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:
                    version mismatch
                    read: 52-63-0 s=0,c=5,t=0,pt=0,l=0:

                    yeah, this isn't what I would expect, but maybe hardware related... look here.

                    Power is my first instinct.

                    @hek any ideas here?

                    also, you didn't try flipping the switches!

                    mntlvrM Offline
                    mntlvrM Offline
                    mntlvr
                    wrote on last edited by
                    #16

                    @BulldogLowell Bulldog
                    The power is coming from 2 LIPO 1500mAH batteries in series, so the boards input voltage is 8.4 volts which the on board regulator is handling on the 24l01 so the nRF24l01 is getting 3.3 volts one 22ufd caps on input right on nrf24l01 board. I am running the exact setup my first board is using when I built it on a Nano. On the Nano build when I would ground anyone of the input pin the Vera would show the state of change right away and so would the Serial Monitor on IDE. I will keep on it until I resolve it.

                    1 Reply Last reply
                    0
                    • hekH hek

                      Message seems corrupt... command-type=5!!

                      Underpowered or some strange mix of different radio-modules.

                      mntlvrM Offline
                      mntlvrM Offline
                      mntlvr
                      wrote on last edited by
                      #17

                      @hek All the radio modules are nRF24l01+ and I have 3 other sensors all working just fine with this gateway all using the same transceiver from the same company.

                      1 Reply Last reply
                      0
                      • hekH hek

                        Message seems corrupt... command-type=5!!

                        Underpowered or some strange mix of different radio-modules.

                        mntlvrM Offline
                        mntlvrM Offline
                        mntlvr
                        wrote on last edited by
                        #18

                        @hek this is the Serial Monitor output from the same board powered the same way except running my original code and no failures.

                        You can see when I gnd the input the output responds.
                        sensor started, id 32
                        send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
                        send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
                        send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl
                        send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.05
                        send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok:
                        send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                        send: 32-32-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                        send: 32-32-0-0 s=6,c=0,t=0,pt=0,l=0,st=ok:
                        send: 32-32-0-0 s=7,c=0,t=0,pt=0,l=0,st=ok:
                        send: 32-32-0-0 s=8,c=0,t=0,pt=0,l=0,st=ok:
                        send: 32-32-0-0 s=3,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=4,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=6,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=7,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=8,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                        send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0

                        BulldogLowellB 1 Reply Last reply
                        0
                        • hekH Offline
                          hekH Offline
                          hek
                          Admin
                          wrote on last edited by
                          #19

                          I suspect the message array is doing some buffer overwrite.

                          Just define one msg and reuse it with
                          msg.setSensor(x)

                          1 Reply Last reply
                          1
                          • BulldogLowellB Offline
                            BulldogLowellB Offline
                            BulldogLowell
                            Contest Winner
                            wrote on last edited by
                            #20

                            @hek said:

                            I suspect the message array is doing some buffer overwrite.

                            Just define one msg and reuse it with
                            msg.setSensor(x)

                            agree...

                            look here:

                            Sensor presentation complete
0;0;3;0;9;send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
Pin 3 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
Pin 4 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
Pin 5 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
Pin 0 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
Pin 1 changed state... New State: Tripped
0;0;3;0;9;send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
Pin 2 changed state... New State: Tripped

                            not winding its way through the array like you wold expect.

                            1 Reply Last reply
                            0
                            • mntlvrM mntlvr

                              @hek this is the Serial Monitor output from the same board powered the same way except running my original code and no failures.

                              You can see when I gnd the input the output responds.
                              sensor started, id 32
                              send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
                              send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
                              send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl
                              send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.05
                              send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=6,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=7,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=8,c=0,t=0,pt=0,l=0,st=ok:
                              send: 32-32-0-0 s=3,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=4,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=6,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=7,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=8,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:1
                              send: 32-32-0-0 s=5,c=1,t=16,pt=0,l=1,st=ok:0

                              BulldogLowellB Offline
                              BulldogLowellB Offline
                              BulldogLowell
                              Contest Winner
                              wrote on last edited by
                              #21

                              @mtnlvr

                              like this perhaps:

                              #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg(0,V_TRIPPED);

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      msg.setSensor(i);
      gw.send(msg.set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
                              mntlvrM 1 Reply Last reply
                              0
                              • BulldogLowellB BulldogLowell

                                @mtnlvr

                                like this perhaps:

                                #include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>

#define NUMBER_OF_PINS 6
#define RADIO_ID 32

MySensor gw;
int buttonPin[NUMBER_OF_PINS] = {3,4,5,6,7,8};
Bounce debouncer[NUMBER_OF_PINS] = Bounce();
int oldValue[NUMBER_OF_PINS];
MyMessage msg(0,V_TRIPPED);

void setup() 
{
  Serial.begin(115200);
  delay(1000);
  Serial.print(F("Sending device info..."));
  gw.begin(NULL, RADIO_ID, false);
  gw.sendSketchInfo("RemoteControl", "1.05");
  gw.wait(250);
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    Serial.print(F("Setting up Pin"));
    Serial.println(i);
    gw.present(i, S_DOOR);
    pinMode(buttonPin[i], INPUT_PULLUP);
    debouncer[buttonPin[i]].attach(buttonPin[i]);
    debouncer[buttonPin[i]].interval(5);
    gw.wait(250);
  }
  Serial.println(F("Sensor presentation complete"));
}

void loop() 
{
  for (int i = 0; i < NUMBER_OF_PINS; i++)
  {
    debouncer[i].update();
    int value = debouncer[i].read();
    if (value != oldValue[i])
    {
      msg.setSensor(i);
      gw.send(msg.set(value));
      Serial.print(F("Pin "));
      Serial.print(i);
      Serial.print(F(" changed state...  New State: "));
      Serial.println(value? F("Tripped") : F("Not Tripped"));
      oldValue[i] = value;
    }
  }
}
                                mntlvrM Offline
                                mntlvrM Offline
                                mntlvr
                                wrote on last edited by
                                #22

                                @BulldogLowell
                                This seems to work much better but what is the "version mismatch"?
                                You can see the change of pin 5 now immediately now when I connect it to gnd or leave it open.

                                Sending device info...sensor started, id 32
                                send: 32-32-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
                                send: 32-32-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
                                read: 0-0-32 s=255,c=3,t=6,pt=0,l=1:I
                                send: 32-32-0-0 s=255,c=3,t=11,pt=0,l=13,st=ok:RemoteControl
                                send: 32-32-0-0 s=255,c=3,t=12,pt=0,l=4,st=ok:1.15
                                Setting up Pin0
                                send: 32-32-0-0 s=0,c=0,t=0,pt=0,l=0,st=ok:
                                Setting up Pin1
                                send: 32-32-0-0 s=1,c=0,t=0,pt=0,l=0,st=ok:
                                Setting up Pin2
                                send: 32-32-0-0 s=2,c=0,t=0,pt=0,l=0,st=ok:
                                Setting up Pin3
                                send: 32-32-0-0 s=3,c=0,t=0,pt=0,l=0,st=ok:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=3,c=0,t=0,pt=0,l=0:
                                Setting up Pin4
                                send: 32-32-0-0 s=4,c=0,t=0,pt=0,l=0,st=ok:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                read: 32-32-0 s=4,c=0,t=0,pt=0,l=0:
                                Setting up Pin5
                                send: 0-0-0-0 s=5,c=0,t=0,pt=0,l=0,st=ok:
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                read: 39-155-0 s=0,c=5,t=0,pt=0,l=0:
                                version mismatch
                                Sensor presentation complete
                                send: 0-0-0-0 s=3,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 3 changed state... New State: Tripped
                                send: 0-0-0-0 s=4,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 4 changed state... New State: Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 5 changed state... New State: Tripped
                                send: 0-0-0-0 s=0,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 0 changed state... New State: Tripped
                                send: 0-0-0-0 s=1,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 1 changed state... New State: Tripped
                                send: 0-0-0-0 s=2,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 2 changed state... New State: Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                Pin 5 changed state... New State: Not Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 5 changed state... New State: Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                Pin 5 changed state... New State: Not Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 5 changed state... New State: Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                Pin 5 changed state... New State: Not Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 5 changed state... New State: Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                Pin 5 changed state... New State: Not Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:1
                                Pin 5 changed state... New State: Tripped
                                send: 0-0-0-0 s=5,c=1,t=16,pt=2,l=2,st=ok:0
                                Pin 5 changed state... New State: Not Tripped

                                1 Reply Last reply
                                0
                                • hekH Offline
                                  hekH Offline
                                  hek
                                  Admin
                                  wrote on last edited by
                                  #23

                                  You seem to have radio disturbance (or the nodes radio get wacky when gateway sends its ack...).

                                  I think I have similar things when underpowering my gateway and sending with full power on a amplified nrf-module.

                                  mntlvrM 1 Reply Last reply
                                  0
                                  • hekH hek

                                    You seem to have radio disturbance (or the nodes radio get wacky when gateway sends its ack...).

                                    I think I have similar things when underpowering my gateway and sending with full power on a amplified nrf-module.

                                    mntlvrM Offline
                                    mntlvrM Offline
                                    mntlvr
                                    wrote on last edited by mntlvr
                                    #24

                                    @hek I just re-ran my Serial Monitor and now pin 5 only shows "version mismatch" I don't know how else to power any of these units because I have a 9 vdc 1 amp power pack on the Gateway and my sensors all have 1 amp, 9 vdc power packs

                                    BulldogLowellB 1 Reply Last reply
                                    0
                                    • mntlvrM mntlvr

                                      @hek I just re-ran my Serial Monitor and now pin 5 only shows "version mismatch" I don't know how else to power any of these units because I have a 9 vdc 1 amp power pack on the Gateway and my sensors all have 1 amp, 9 vdc power packs

                                      BulldogLowellB Offline
                                      BulldogLowellB Offline
                                      BulldogLowell
                                      Contest Winner
                                      wrote on last edited by
                                      #25

                                      @mntlvr

                                      I really never use toggle switches like you are using here but it dawned on me that you are drawing current on all six pins simultaneously using the internal pull-ups. Perhaps you are overdrawing the power of the arduino a bit, causing the spurious results. We don't see the error until we power up that #5 pin.... but you are getting some crazy radio activity prior to that after we power up pin 3. That's where it occurred to me that we may be asking too much of your arduino, sinking all of the 6 pins to ground at once.

                                      Can you try:

                                      a: opening all of the switches before initialization and see if you still get the funky version mismatch error? Or,

                                      b: just let the pins float by changing the initialization of the pin to:

                                      pinMode(buttonPin[i], INPUT);

                                      and see if it at least initializes correctly (your switches won't work correctly, that's fine to test this theory).

                                      just spitballing here... but if that helps, there are solutions (at least one of which may require you to remove some of that lovely potting ;).

                                      mntlvrM 2 Replies Last reply
                                      0
                                      • BulldogLowellB BulldogLowell

                                        @mntlvr

                                        I really never use toggle switches like you are using here but it dawned on me that you are drawing current on all six pins simultaneously using the internal pull-ups. Perhaps you are overdrawing the power of the arduino a bit, causing the spurious results. We don't see the error until we power up that #5 pin.... but you are getting some crazy radio activity prior to that after we power up pin 3. That's where it occurred to me that we may be asking too much of your arduino, sinking all of the 6 pins to ground at once.

                                        Can you try:

                                        a: opening all of the switches before initialization and see if you still get the funky version mismatch error? Or,

                                        b: just let the pins float by changing the initialization of the pin to:

                                        pinMode(buttonPin[i], INPUT);

                                        and see if it at least initializes correctly (your switches won't work correctly, that's fine to test this theory).

                                        just spitballing here... but if that helps, there are solutions (at least one of which may require you to remove some of that lovely potting ;).

                                        mntlvrM Offline
                                        mntlvrM Offline
                                        mntlvr
                                        wrote on last edited by
                                        #26

                                        @BulldogLowell said:

                                        @mntlvr

                                        I really never use toggle switches like you are using here but it dawned on me that you are drawing current on all six pins simultaneously using the internal pull-ups. Perhaps you are overdrawing the power of the arduino a bit, causing the spurious results. We don't see the error until we power up that #5 pin.... but you are getting some crazy radio activity prior to that after we power up pin 3. That's where it occurred to me that we may be asking too much of your arduino, sinking all of the 6 pins to ground at once.

                                        Can you try:

                                        a: opening all of the switches before initialization and see if you still get the funky version mismatch error? Or,

                                        b: just let the pins float by changing the initialization of the pin to:

                                        pinMode(buttonPin[i], INPUT);

                                        and see if it at least initializes correctly (your switches won't work correctly, that's fine to test this theory).

                                        just spitballing here... but if that helps, there are solutions (at least one of which may require you to remove some of that lovely potting ;).

                                        Oh no Bulldog that is the one unit that is working just fine, all the version mismatches comes from your code I am trying out and we are making progress. For some reason when you are using arrays and for next loop this is where some of the issues are . If you look up a few replys when I replied to @hek I was using my code and there were no version mismatches.

                                        BulldogLowellB 1 Reply Last reply
                                        0
                                        • mntlvrM mntlvr

                                          @BulldogLowell said:

                                          @mntlvr

                                          I really never use toggle switches like you are using here but it dawned on me that you are drawing current on all six pins simultaneously using the internal pull-ups. Perhaps you are overdrawing the power of the arduino a bit, causing the spurious results. We don't see the error until we power up that #5 pin.... but you are getting some crazy radio activity prior to that after we power up pin 3. That's where it occurred to me that we may be asking too much of your arduino, sinking all of the 6 pins to ground at once.

                                          Can you try:

                                          a: opening all of the switches before initialization and see if you still get the funky version mismatch error? Or,

                                          b: just let the pins float by changing the initialization of the pin to:

                                          pinMode(buttonPin[i], INPUT);

                                          and see if it at least initializes correctly (your switches won't work correctly, that's fine to test this theory).

                                          just spitballing here... but if that helps, there are solutions (at least one of which may require you to remove some of that lovely potting ;).

                                          Oh no Bulldog that is the one unit that is working just fine, all the version mismatches comes from your code I am trying out and we are making progress. For some reason when you are using arrays and for next loop this is where some of the issues are . If you look up a few replys when I replied to @hek I was using my code and there were no version mismatches.

                                          BulldogLowellB Offline
                                          BulldogLowellB Offline
                                          BulldogLowell
                                          Contest Winner
                                          wrote on last edited by
                                          #27

                                          @mntlvr

                                          yes, I meant with my code!

                                          mntlvrM 1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes

                                          18

                                          Online

                                          11.7k

                                          Users

                                          11.2k

                                          Topics

                                          113.1k

                                          Posts


                                          Copyright 2025 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                          • Login
                                          • Don't have an account? Register
                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • MySensors
                                          • OpenHardware.io
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular