Two serial gateways: 1-st for NRF and 2-nd for RFM69 radios. Is it possible?



  • I tried but got some mess in the device list.


  • Mod

    Yes, multiple gateways work with Domoticz.

    Could you describe the "mess" a bit more?



  • the "mess"
    Encircled in red are NRF radio sensors. If I add RFM gateway and two RFM radio connected sensors domoticz devices page starts to show all NRF radio based sensors like they are working through RFM gateway. In the encircled red column "Hardware" there will be different gateway names. Consequently, all system not sending or receiving any messages correctly.
    0_1462347011201_2016-05-04_10-03-01.png


  • Mod

    Some of the sensors in red are from the motherborad, not nrf. But that shouldn't make much difference. Would be interesting to see what it looks like when the rfms are added.

    I see that you are using a slightly old version of Domoticz. Maybe upgrade to v4834 or later and see if it works better?



  • Ok. I will update it later today. Thanks for helping!

    re:
    Would be interesting to see what it looks like when the rfms are added.

    there will be instead of "Mysensors" the "RFM" gateway name whatever I named it.


  • Mod

    What does the Hardware page and the MySensors page[1] look like when the rfm gateways are added? I don't have any rfm gateways but my installations looks like this:
    1_1462354589674_image.png 0_1462354589673_image.png

    [1]: click the Setup link on the MySensors gateway on the Hardware page to get to the MySensors page



  • @mfalkvidd - Thanks again!

    after update all is good now. No mess. I was pressing update as beta release for a few month but there were no updates available.... last night found there is stable available! cool.

    just for debugging if anyone interested - I noticed variable type is not visible in hardware interface for serial gateway 2.0. But that is ok. All works good

    0_1462428171642_2016-05-05_8-50-59.png
    0_1462428239996_2016-05-05_8-56-09.png
    0_1462428273920_2016-05-05_8-50-37.png



  • "variable type is not visible in hardware interface" it has been updated after some time also. Now it is visible.


  • Mod

    Eat!

    Sketch name is only sent when the node presents itself, so you might need to reset all nodes if you want that field populated right away. Might be the same for child name.


Log in to reply
 

Suggested Topics

  • 5
  • 4
  • 8
  • 5
  • 2
  • 4

25
Online

11.2k
Users

11.1k
Topics

112.5k
Posts