💬 Aeos : a NRF52 versatile, up to 9in1, device
-
@NeverDie said in 💬 Aeos : a NRF52 versatile, up to 9in1, device:
One quick thing: I've started a PCB layout for this module. From the looks of the pictures on the e-bay listing, I'm assuming pins 0, 1, 2, 42, and 43 are all Ground.
Is that your interpretation also?It's what's written in the datasheet ;)
0_1499826898882_E73-2G4M04S_Datasheet_EN_v1.1.pdf -
@NeverDie hmm.. guys could you open a new topic regarding your nrf52 module please?
(as i'm not planning to use it for Aeos, cost almost the same for me to use the IC, and i can do more compact stuff)
Else that will be a mess here ;) Thx!@Nca78 will upload some sch, was busy..
Here a very simple rfm69 extension for Aeos, when i need more range:
And a simple pcb for quick reprogramming the first time (as the next times it will be through OTA).
-
@NeverDie hmm.. guys could you open a new topic regarding your nrf52 module please?
(as i'm not planning to use it for Aeos, cost almost the same for me to use the IC, and i can do more compact stuff)
Else that will be a mess here ;) Thx!@Nca78 will upload some sch, was busy..
Here a very simple rfm69 extension for Aeos, when i need more range:
And a simple pcb for quick reprogramming the first time (as the next times it will be through OTA).
@scalz said in 💬 Aeos : a NRF52 versatile, up to 9in1, device:
And a simple pcb for quick reprogramming the first time (as the next times it's through OTA).
OTA ? Is a bootloader already made ? :o
-
@Nca78
There are some stuff already existing though.
You can take a look at Adafruit nrf52 board, they have a bootloader for BLE, and their sch can also help you to understand how the above module is working in case.
Regarding Mysensors OTA etc, stay tuned.. -
@Nca78
There are some stuff already existing though.
You can take a look at Adafruit nrf52 board, they have a bootloader for BLE, and their sch can also help you to understand how the above module is working in case.
Regarding Mysensors OTA etc, stay tuned..@scalz said in 💬 Aeos : a NRF52 versatile, up to 9in1, device:
You can take a look at Adafruit nrf52 board, they have a bootloader for BLE, and their sch can also help you to understand how the above module is working in case.
Regarding Mysensors OTA etc, stay tuned..It would be nice if you can enable OTA. The DFU bootloader is placed at the top of Flash. This region conflicts with the NVM driver. You have to move the used Flash region.
The bootloader is documented at http://infocenter.nordicsemi.com/topic/com.nordic.infocenter.sdk5.v13.1.0/lib_bootloader_modules.html
At the moment I have no time to work on an bootloader. If you want to discuss things you can contact me.
-
Here is a pic of Aeos rev 1.0. (the revision with 4layers and custom antenna for better perf, but not tuned yet).
Working well though :)
With a simple adapter to my segger OB for programming it, or ftdi and some IOs. (actually playing a bit with ble for a change). Need to print a box!
-
I hope we'll see the Aeos soon. It should help stimulate interest in the nRF52832.
-
@scalz
Great project! When can we expect the project files to be available? -
thx for interests. I'll release this project and a few others maybe, at same time as my Halo gateway. to make a prez if possible. asap.
-
Hi guys! Also interested. Please let me know if I can help. Or as soon as you have some first run I'm willing to buy some. Thanks
-
This project is impressive, I really like it. Pity it is so silent about it. After all this work, are you not willing to finish it?
-
@scalz May I request you to share your code for it please. Thanks
