@yveaux said in Ikea Molgan Hack: @magpern the instructions on openhardware.io state that the Molgan must be battery powered while programming: Well, then I can confirm that you don't have to power the Molgan from batteries just for programming. Burning the bootloader works fine with just power from the ISP port and programming it through FTDI works fine if power comes from the FTDI. What I found wierd is that the atmega328 had power, the radio had power, it wrote debug messages to the FTDI - when powered through the FTDI, it send radio messages etc, but it just did not receive messages. Messages where not received until I supplied power to the + / - pads (battery pads). I did read the instructions on openhardware.io, but I didn't follow then to the t.

@nikgru extensive teardown of the lamp (German, but you know how to translate) : https://m.heise.de/make/artikel/Ikea-Tradfri-Das-steckt-im-Smart-Home-aus-dem-Moebelhaus-3597295.html?wt_ref=http%3A%2F%2Fhackaday.com%2Fblog%2F&wt_t=1486396685063

Do you have interest to try OH2 together with MySensors Ethernet Gateway to get working? I do not have enough force to push developers to make this happen. At the moment there is some problem on this, because full control is not possible. I think that MySensors Serial Gateway is working with OH2, but I don't like to use it. I like to connect my devices into LAN not cabling via old fashioned way using serial wires.

It would be nice to control the Patrull similarly to http://thingm.com/products/blink-1/.