Hi @chey, no, with the pro minis and MySensors lib I couldn't get less. Didn't measure with yet another multimeter though... My battery sensors are working now for about a year and the battery levels are between 65% and 70%. The sensor furthest from the gateway is at 65% and the 3 others at 70%. Not bad I think. https://forum.mysensors.org/topic/11499/checking-mechanical-locked-doors-by-a-battery-based-windows-door-sensor-node

Sure, there is already the KiCAD file including everything to play around with on your own; added a picture of the schematic here for a quick glance without downloading.

High sensitivity: down to -148 dBm. From the datasheet. There probably needs to be some margin, but my experience with Sigfox shows that -130 is quite reliable. After that, packets start go missing. I would guess LoRa is similar.

@scalz said in HALO : ESP32 multi transport GW/Bridge for Mysensors: the webapp was great, but I converted it to native crossplatform app for better versatility&perf, so I can use one app for my devices, like Ethernet for HALO etc, or Serial for my other Janus gw dongle, bluetooth.. To be honest, I've not updated anything yet for a few reasons, like very little spare time for a public release + support for such "big" project. (easier to handle local projects). Sorry, still no eta for the moment.. It is clear that there is not enough time. But this project can become popular. That's what's missing MySensors. ...This void must be filled.

@doug Can't wait for you to release the BOM

@MiKa Hi. oki, in case i'll add some explanation.. I'll be busy for this week but you can simply use the serial gw example from MySensors for getting started, this should work. I didn't need to create a special board in arduino for this board, so if you're using it, you'll need to install&use the mattairtech SAMD21 board definition for the pin mapping. https://github.com/mattairtech/ArduinoCore-samd