Using a Gateway as a node?
-
Hi All,
I am not really sure if I have misunderstood, but I think I read somewhere that it is possible to do the above with a single Arduino.
I have created an IR sensor with two individual Arduino's one acting as the Gateway and one acting as the IR Sensor node.
As this is all I want at the moment - would it be possible to integrate this functionality into one Arduino.
Questions:
Is this possible?I am using 1.5 at the moment from the forum. Can this be used or do I need to move up to 2.0?
I am not a natural programmer. Could any one point me to an "easy" sketch so I can understand how to combine the two sketches - possibly some thing easy like a simple button LED example.
For info. I am using an Uno for my project.
Best wishes.
James.
-
Hi all,
Any comments would be appreciated.
Best wishes.
-
It is possible using the development version, but not with 1.5.x
Sine the development version is still in development, no easy sketch exists (as far as I know)
-
Many thanks. I can wait till it is published for newbies. Just wanted to know if it was possible.
Best wishes.
-
If you post both your sketches, someone will probably be able to help you make one sketch out of them.
Suggested Topics
-
Arduino Celebrates 10 years (Malmö/Sweden)
Announcements • 29 Mar 2014, 17:08 • hek 29 Mar 2014, 17:08 -
Counting Incoming and Outgoing Messages from a Gateway
Development • 10 Dec 2024, 21:57 • Trand 14 Dec 2024, 20:23 -
MYSController with MQTT Gateway (via Node Red)
Development • 11 Aug 2024, 22:35 • slt1 11 Aug 2024, 22:35 -
MQTT GW on ESP8266 supporting SSL/TLS?
Development • 4 Jun 2024, 10:21 • bgunnarb 27 Jun 2024, 13:53 -
LAN8720A - will mysensors work with this module
Development • 13 Nov 2024, 17:06 • Marcin 15 Nov 2024, 10:59 -
Sending offset to node
Development • 24 days ago • bsl88k 19 days ago