IO Broker Comprehension problem.

[ThomasDr]

Hello,

so far i use 2 programs MYSControler for config the Nodes and a other that simply receive the Sensors. I connect to a W5100 Ethernet Gateway with API 2.
Now i try to use io Brocker and i don't know how it work.
I discover that i can connect with MYSController to IO Broker, but the only i receive in MYSController is:
get metric
force presentation
force restart
IO Broker log:

mysensors.0	2016-11-12 10:03:09.152	debug	mysensors.0 Sent to 192.168.0.128 0;0;3;0;13;force restart
mysensors.0	2016-11-12 10:03:09.150	debug	mysensors.0 Send raw data: 0;0;3;0;13;force restart
mysensors.0	2016-11-12 10:03:07.658	debug	inMem message mysensors.0.* mysensors.0.info.connection
mysensors.0	2016-11-12 10:03:07.658	debug	mysensors.0 Sent to 192.168.0.128 0;0;3;0;19;force presentation
mysensors.0	2016-11-12 10:03:07.658	debug	mysensors.0 Sent to 192.168.0.128 0;0;3;0;6;get metric
mysensors.0	2016-11-12 10:03:07.657	debug	mysensors.0 Send raw data: 0;0;3;0;19;force presentation
mysensors.0	2016-11-12 10:03:07.657	debug	mysensors.0 Send raw data: 0;0;3;0;6;get metric
mysensors.0	2016-11-12 10:03:07.652	info	mysensors.0 Connected 192.168.0.128:37756
mysensors.0	2016-11-12 10:02:51.806	debug	inMem message mysensors.0.* mysensors.0.info.connection  

How do I get this to work

regards ThomasD

[ThomasDr]

Hello,

I found the mistake, I had to set the gateway as a client.

regards
ThomasD