nRF5 action!
-
@neverdie it's this link, in the description on aliexpress you can see the internal PCB "module"
https://www.aliexpress.com/store/product/Nordic-nRF52832-BLE-4-0-4-2-5-0-USB-UART-BLE-dongle-for-computer/420533_32862480389.html -
@neverdie it's this link, in the description on aliexpress you can see the internal PCB "module"
https://www.aliexpress.com/store/product/Nordic-nRF52832-BLE-4-0-4-2-5-0-USB-UART-BLE-dongle-for-computer/420533_32862480389.html@nca78 said in nRF5 Bluetooth action!:
@neverdie it's this link, in the description on aliexpress you can see the internal PCB "module"
https://www.digikey.com/product-detail/en/tag-connect-llc/TC2030-CLIP/TC2030-CLIP-ND/2605371? Plug of nails?
-
@nca78 said in nRF5 Bluetooth action!:
@neverdie it's this link, in the description on aliexpress you can see the internal PCB "module"
https://www.digikey.com/product-detail/en/tag-connect-llc/TC2030-CLIP/TC2030-CLIP-ND/2605371? Plug of nails?
-
I dropped "Bluetooth" from the title of this thread because the thread instead evolved into the MySensors alternative to Bluetooth.
-
How hard, or how much work, would it be to create a version of the MySensors gateway that works on one of those dongles?
-
How hard, or how much work, would it be to create a version of the MySensors gateway that works on one of those dongles?
-
Really? So something like:
- Upload gateway sketch to it (how?)
- Select "serial connection" in Domoticz?
-
Really? So something like:
- Upload gateway sketch to it (how?)
- Select "serial connection" in Domoticz?
-
i don't think you need extraordinary soldering skills, pads on bottom looks easy ;) (pretty sure these are the programming pads)
The right question, imho, would be: can you expect from this dongle the range you would expect from a gateway ?? regarding chip antenna performance and maybe its gnd counterpoise..
-
i don't think you need extraordinary soldering skills, pads on bottom looks easy ;) (pretty sure these are the programming pads)
The right question, imho, would be: can you expect from this dongle the range you would expect from a gateway ?? regarding chip antenna performance and maybe its gnd counterpoise..
-
@Toyman yep, this confirms what i said, not difficult to access.
I didn't read the description..just looking at the pcb layout was enough to tell me poor rf range + no basic usb spec design rules (latter point is maybe not the most critical for most of people, but it just shows 1) designer wasn't aware ?? 2) this is what you get for cheap money, whereas missing parts would have cost few cents..).
Just saying, because maybe this dongle can work well enough for some people. -
@Toyman yep, this confirms what i said, not difficult to access.
I didn't read the description..just looking at the pcb layout was enough to tell me poor rf range + no basic usb spec design rules (latter point is maybe not the most critical for most of people, but it just shows 1) designer wasn't aware ?? 2) this is what you get for cheap money, whereas missing parts would have cost few cents..).
Just saying, because maybe this dongle can work well enough for some people. -
Looks as though there is also a new DK for the nRF52840 as well:
https://www.digikey.com/product-detail/en/nordic-semiconductor-asa/NRF52840-DK/1490-1072-ND/8593726
just not in stock.Looks like HolyIOT is ahead of the curve on this chip.
-
@jokgi said in nRF5 action!:
@neverdie I would suggest holding off on purchasing a new nRF52840-PDK until the final silicon is released.
Oh! It's still not?
-
i don't think you need extraordinary soldering skills, pads on bottom looks easy ;) (pretty sure these are the programming pads)
The right question, imho, would be: can you expect from this dongle the range you would expect from a gateway ?? regarding chip antenna performance and maybe its gnd counterpoise..
@scalz
I would be interested in any range testing in regard to this dongle. For ground it has whatever it is that it is plugged into. (PC, SBC, USB extention cable, etc) There will be a nRF52840 based dongle out soon. See picture above. This dongle will need to be programed over the SWD lines. No Segger on board this one..! -
@Nca78
Getting rid of the ground plains around the entire module hugely improved the range. Had to stap back to AAA batteries to fit on the board. But I'm happy with the way it's going (AA is still possible but not soldered on it just doesn't fit enough in the wall socket) -
Very nice. Looks professional!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login