Message is send twice
-
Hi all,
I'm trying to detect when my generator runs, the external detection circuit works with no problems, but when the ProMini starts, it sends the message twice to the controller, although there was not a state change, see me code belowvoid loop() { bool tripped = digitalRead(GENERATOR_PIN) == HIGH; wait(1000); if (tripped == 0) { wait(5000); Serial.println("Generator RUNNING"); send(msgGENERATOR.set(1)); sleep(digitalPinToInterrupt(GENERATOR_PIN), CHANGE, SLEEP_TIME); //send(msgGENERATOR.set(tripped?"1":"0")); } if (tripped == 1) { Serial.println("Generator NOT running - Not sending"); wait(5000); bool tripped = digitalRead(GENERATOR_PIN) == HIGH; if (tripped == 1) { Serial.println("Generator NOT running - SENDING...."); send(msgGENERATOR.set(0)); sleep(digitalPinToInterrupt(GENERATOR_PIN), CHANGE, SLEEP_TIME); } } }The serial port output demonstrate the problem, I'm checking twice if the generator is running, but it does not seem to break out of the loop, any help please!!
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.1.1 4 TSM:INIT 4 TSF:WUR:MS=0 8 TSM:INIT:TSP OK 10 TSM:INIT:STATID=11 12 TSF:SID:OK,ID=11 14 TSM:FPAR 145 TSF:MSG:SEND,11-11-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 587 TSF:MSG:READ,0-0-11,s=255,c=3,t=8,pt=1,l=1,sg=0:0 593 TSF:MSG:FPAR OK,ID=0,D=1 2152 TSM:FPAR:OK 2152 TSM:ID 2154 TSM:ID:OK 2156 TSM:UPL 2164 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 2215 TSF:MSG:READ,0-0-11,s=255,c=3,t=25,pt=1,l=1,sg=0:1 2222 TSF:MSG:PONG RECV,HP=1 2224 TSM:UPL:OK 2226 TSM:READY:ID=11,PAR=0,DIS=1 2238 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100 2289 TSF:MSG:READ,0-0-11,s=255,c=3,t=15,pt=6,l=2,sg=0:0100 2304 TSF:MSG:SEND,11-11-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.1 2320 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0 4335 TSF:MSG:SEND,11-11-0-0,s=6,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 4349 TSF:MSG:SEND,11-11-0-0,s=7,c=0,t=30,pt=0,l=0,sg=0,ft=0,st=OK: 4358 MCO:REG:REQ 4368 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2 4417 TSF:MSG:READ,0-0-11,s=255,c=3,t=27,pt=1,l=1,sg=0:1 4423 MCO:PIM:NODE REG=1 4427 MCO:BGN:STP 5427 MCO:BGN:INIT OK,TSP=1 Generator NOT running - Not sending Generator NOT running - SENDING.... 11440 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0 11446 MCO:SLP:MS=3600000,SMS=0,I1=1,M1=2,I2=255,M2=255 11452 MCO:SLP:TPD 11454 MCO:SLP:WUP=1 Generator NOT running - Not sending Generator NOT running - SENDING.... 17469 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0 17475 MCO:SLP:MS=3600000,SMS=0,I1=1,M1=2,I2=255,M2=255 17481 MCO:SLP:TPD
-
Try adding some more debug prints of variables on serial an try to understand why it loops twice
-
From your log i can see that your node goes to sleep, and immediately wakes up again.
I don't know the value of your SLEEP_TIME, but i guess it's not a value close to 0.
It looks like your sleep() cycle is interrupted by a change on your GENERATOR_PIN.
What if you inserted a short pause just before going to sleep, just after send(msgGENERATOR)?Another way to handle interrupts:
Your code uses an interrupt to detect changes of the generator status, but you handle possible changes outside the interrupt-handler (the code that is executed whenever there was a change on the pin). Your sleep function can exit in two ways: by interrupt OR by the SLEEP_TIME expiring. Your code does the same in both cases. Even if there was no change on the pin, but the timer expired, a message will be send.
If you only want to send a message when there was actually a change of signal on the pin, i would use an interrupt-handler that detects any change, and let the loop() code know about it.volatile bool generator_pin_changed = false; volatile int generator_pin_value; void generator_pin_interrupt_handler() { generator_pin_changed = true; generator_pin_value = digitalRead(GENERATOR_PIN); } void setup() { attachInterrupt(digitalPinToInterrupt(GENERATOR_PIN), generator_pin_interrupt_handler, CHANGE); } void loop() { if (generator_pin_changed) { generator_pin_changed = false; /* reset for next detection */ if (generator_pin_value == LOW) { Serial.println("Generator RUNNING"); send(msgGENERATOR.set(1)); } else { Serial.println("Generator NOT running - SENDING...."); send(msgGENERATOR.set(0)); } } wait(200); /* sleep again if the timer expired. stop sleeping if woken up by an interrupt. */ while (sleep(digitalPinToInterrupt(GENERATOR_PIN), CHANGE, SLEEP_TIME) < 0); }
-
@core_c Thanks so much, this did the trick, thanks again!!!
-
@core_c I spoke to soon, looks like it detects the change, but does not do anything, I made the unsigned long SLEEP_TIME = 0;
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.1.1 4 TSM:INIT 4 TSF:WUR:MS=0 8 TSM:INIT:TSP OK 10 TSM:INIT:STATID=11 12 TSF:SID:OK,ID=11 14 TSM:FPAR 145 TSF:MSG:SEND,11-11-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 405 TSF:MSG:READ,0-0-11,s=255,c=3,t=8,pt=1,l=1,sg=0:0 411 TSF:MSG:FPAR OK,ID=0,D=1 2152 TSM:FPAR:OK 2152 TSM:ID 2154 TSM:ID:OK 2156 TSM:UPL 2164 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 2215 TSF:MSG:READ,0-0-11,s=255,c=3,t=25,pt=1,l=1,sg=0:1 2222 TSF:MSG:PONG RECV,HP=1 2224 TSM:UPL:OK 2226 TSM:READY:ID=11,PAR=0,DIS=1 2238 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100 2289 TSF:MSG:READ,0-0-11,s=255,c=3,t=15,pt=6,l=2,sg=0:0100 2304 TSF:MSG:SEND,11-11-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.1 2320 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0 4335 TSF:MSG:SEND,11-11-0-0,s=6,c=0,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 4349 TSF:MSG:SEND,11-11-0-0,s=7,c=0,t=30,pt=0,l=0,sg=0,ft=0,st=OK: 4358 MCO:REG:REQ 4368 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2 4417 TSF:MSG:READ,0-0-11,s=255,c=3,t=27,pt=1,l=1,sg=0:1 4423 MCO:PIM:NODE REG=1 4427 MCO:BGN:STP interupt 1 5429 MCO:BGN:INIT OK,TSP=1 1 Generator NOT running - SENDING.... 5441 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0 5648 MCO:SLP:MS=0,SMS=0,I1=1,M1=1,I2=255,M2=255 5652 MCO:SLP:TPD 5654 MCO:SLP:WUP=1 5857 MCO:SLP:MS=0,SMS=0,I1=1,M1=1,I2=255,M2=255 5861 MCO:SLP:TPD 5863 MCO:SLP:WUP=1 6066 MCO:SLP:MS=0,SMS=0,I1=1,M1=1,I2=255,M2=255 6070 MCO:SLP:TPD
-
Why sleep time = 0?
-
@esawyja I don't really know what your goal is, but is it correct to send a 1 if the generator is running, and to send a 0 when it's not running?
It seems more logical to send a 1 to enable a device, and 0 to disable it.Could it be that you disable the generator, and it simply is not responding anymore?
-
@core_c Hi
Does it really matter, it's just the way the external circuitry is set up, it pulls to a low when the generator is running, I get get it working with this below, but I'm afraid my coding skills are not that good
void loop() { bool tripped = digitalRead(GENERATOR_PIN) == HIGH; Serial.print("value of tripped = "); Serial.println(tripped); wait(1000); if ((tripped == 0) && ( tripped != oldValue)) { Serial.println("Generator RUNNING - Not sending"); wait(1000); bool tripped = digitalRead(GENERATOR_PIN) == HIGH; if (tripped == 0) { Serial.println("Generator RUNNING - SENDING"); send(msgGENERATOR.set(1)); wait(10000); send(msgGENERATOR.set(1)); oldValue = tripped; read_batt(); } } if ((tripped == 1) && ( tripped != oldValue)) { Serial.println("Generator NOT running - Not sending"); wait(1000); bool tripped = digitalRead(GENERATOR_PIN) == HIGH; if (tripped == 1) { Serial.println("Generator NOT running - SENDING...."); send(msgGENERATOR.set(0)); wait(10000); send(msgGENERATOR.set(0)); oldValue = tripped; read_batt(); } } sleep(digitalPinToInterrupt(GENERATOR_PIN), CHANGE, SLEEP_TIME); } void read_batt() { wait(15000); int sensorValue = analogRead(BATTERY_SENSE_PIN); float batteryV = sensorValue * volt_value; send(batt_msg.set(batteryV,2)); return; }
-
@esawyja No, it does not matter if it's active low or active high. I was only thinking that it could be an oversight.. something wrong in code that someone (possibly) keeps missing because they are assuming that that part of the code is correct.
About what you said previously: "looks like it detects the change, but does not do anything":
Correct me if i'm wrong, but this looks like it detects, and does something:interupt 1 5429 MCO:BGN:INIT OK,TSP=1 1 Generator NOT running - SENDING.... 5441 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0After that, when the generator did not change state anymore, you will see a stream of only sleep/wake-up messages (a stream, because sleeptime is 0). I see that stream start at 5648.
In your current program, i'm curious if that second send() is really needed (the last send in the "send,wait(10000),send" sequence).
But anyway, your skills got it working..
-
@core_c thanks, just a bit worried about my programming skills, yes the reason for the double send is that sometimes I get st=NACK and I'm worried about missing the start , stop message, hence I send the message twice, I don't know how to detect the st=NACK, thanks for the help
-
@esawyja send will return a boolean result which you can use to determine if the message was successful. For an example have a look at this post
-
@Boots33 Thanks so much, I'll have a look
-
@esawyja In your last program, your battery level is only send when the generator changed state.
Probably you want to let the battery report it's level at regular intervals, independent of the generator state.
Boots33 pointed out how to know if a message has been sent succesfully.
Here is a version of your sketch that does both things:#define RETRY_TIMES 3 #define RETRY_WAIT 10000 #define BATTERY_REPORT_INTERVAL 60000 int oldValue; uint32_t battery_report_time; volatile bool generator_pin_changed = false; volatile int generator_pin_value; void generator_pin_interrupt_handler() { generator_pin_changed = true; generator_pin_value = digitalRead(GENERATOR_PIN); } void setup() { oldValue = digitalRead(GENERATOR_PIN); sendGeneratorMsg(oldValue==HIGH?0:1); battery_report_time = millis() + BATTERY_REPORT_INTERVAL; attachInterrupt(digitalPinToInterrupt(GENERATOR_PIN), generator_pin_interrupt_handler, CHANGE); } void loop() { int value = digitalRead(GENERATOR_PIN); if (value != oldValue) { oldValue = value; if (value == LOW) { Serial.println("Generator RUNNING - SENDING"); sendGeneratorMsg(1); } else { Serial.println("Generator NOT running - SENDING...."); sendGeneratorMsg(0); } } long sleep_time_left = battery_report_time - millis(); if (sleep_time_left < 0) { battery_report_time = millis() + BATTERY_REPORT_INTERVAL; sleep_time_left = BATTERY_REPORT_INTERVAL; read_batt(); } sleep(digitalPinToInterrupt(GENERATOR_PIN), CHANGE, sleep_time_left); } void sendGeneratorMsg(int state) { for (int i=0; i<RETRY_TIMES; i++) { if (send(msgGENERATOR.set(state))) { Serial.println("Generator message sent"); return; } wait(RETRY_WAIT); } Serial.println("Failed to send generator message"); } void read_batt() { wait(15000); int sensorValue = analogRead(BATTERY_SENSE_PIN); float batteryV = sensorValue * volt_value; send(batt_msg.set(batteryV,2)); }EDIT: I have changed ^^the code^^ with the suggestions i made in my next post.
-
@core_c thanks so much, I will try it ASAP and provide feedback, thanks again!
-
@core_c This works a treat, but I don't get the battery readings, if I look at the debug log, the MS seems to become quite large
71362 MCO:SLP:MS=9681,SMS=0,I1=1,M1=1,I2=255,M2=255 71366 MCO:SLP:TPD 71370 MCO:SLP:WUP=-1 71372 MCO:SLP:MS=9671,SMS=0,I1=1,M1=1,I2=255,M2=255 71378 MCO:SLP:TPD 71380 MCO:SLP:WUP=1 71383 MCO:SLP:MS=9660,SMS=0,I1=1,M1=1,I2=255,M2=255 71389 MCO:SLP:TPD 71391 MCO:SLP:WUP=1 Generator RUNNING - SENDING 71401 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:1 Generator message sent 81424 MCO:SLP:MS=4294966915,SMS=0,I1=1,M1=1,I2=255,M2=255 81430 MCO:SLP:TPD 81432 MCO:SLP:WUP=1 81434 MCO:SLP:MS=4294966905,SMS=0,I1=1,M1=1,I2=255,M2=255 81440 MCO:SLP:TPD 81444 MCO:SLP:WUP=1 Generator NOT running - SENDING... 81498 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0 Generator message sent 91521 MCO:SLP:MS=4294956818,SMS=0,I1=1,M1=1,I2=255,M2=255 91527 MCO:SLP:TPDAny suggestions please?
-
@core_c Sorry me again, here I made
#define BATTERY_REPORT_INTERVAL 2000
and printed the valuebattery_report_time = millis() + BATTERY_REPORT_INTERVAL;
Serial.print("Battery report time is = ");
Serial.println(battery_report_time);It looks like the sleep uses the time left over, as it prints faster and faster on the serial port and then the MS value just increases 10 fold
21035 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0 Battery report time is = 23043 21043 MCO:BGN:INIT OK,TSP=1 21049 MCO:SLP:MS=1994,SMS=0,I1=1,M1=1,I2=255,M2=255 21053 MCO:SLP:TPD 21057 MCO:SLP:WUP=1 21059 MCO:SLP:MS=1984,SMS=0,I1=1,M1=1,I2=255,M2=255 21065 MCO:SLP:TPD 21067 MCO:SLP:WUP=-1 21069 MCO:SLP:MS=1974,SMS=0,I1=1,M1=1,I2=255,M2=255 21075 MCO:SLP:TPD 21078 MCO:SLP:WUP=-1 21080 MCO:SLP:MS=1963,SMS=0,I1=1,M1=1,I2=255,M2=255 21086 MCO:SLP:TPD 21088 MCO:SLP:WUP=-1 21092 MCO:SLP:MS=1951,SMS=0,I1=1,M1=1,I2=255,M2=255 21096 MCO:SLP:TPD 21100 MCO:SLP:WUP=-1 ...... ...... 22878 MCO:SLP:MS=165,SMS=0,I1=1,M1=1,I2=255,M2=255 22882 MCO:SLP:TPD 22884 MCO:SLP:WUP=-1 22888 MCO:SLP:MS=155,SMS=0,I1=1,M1=1,I2=255,M2=255 22892 MCO:SLP:TPD 22896 MCO:SLP:WUP=-1 22898 MCO:SLP:MS=145,SMS=0,I1=1,M1=1,I2=255,M2=255 22904 MCO:SLP:TPD 22906 MCO:SLP:WUP=-1 22908 MCO:SLP:MS=135,SMS=0,I1=1,M1=1,I2=255,M2=255 22915 MCO:SLP:TPD 22917 MCO:SLP:WUP=-1 22919 MCO:SLP:MS=124,SMS=0,I1=1,M1=1,I2=255,M2=255 22925 MCO:SLP:TPD 22927 MCO:SLP:WUP=-1 22931 MCO:SLP:MS=112,SMS=0,I1=1,M1=1,I2=255,M2=255 22935 MCO:SLP:TPD 22937 MCO:SLP:WUP=-1 22941 MCO:SLP:MS=102,SMS=0,I1=1,M1=1,I2=255,M2=255 22945 MCO:SLP:TPD 22947 MCO:SLP:WUP=-1 22951 MCO:SLP:MS=92,SMS=0,I1=1,M1=1,I2=255,M2=255 22958 MCO:SLP:TPD 22960 MCO:SLP:WUP=-1 22962 MCO:SLP:MS=81,SMS=0,I1=1,M1=1,I2=255,M2=255 22968 MCO:SLP:TPD 22970 MCO:SLP:WUP=-1 22972 MCO:SLP:MS=71,SMS=0,I1=1,M1=1,I2=255,M2=255 22978 MCO:SLP:TPD 22980 MCO:SLP:WUP=-1 22982 MCO:SLP:MS=61,SMS=0,I1=1,M1=1,I2=255,M2=255 22988 MCO:SLP:TPD 22990 MCO:SLP:WUP=-1 22992 MCO:SLP:MS=51,SMS=0,I1=1,M1=1,I2=255,M2=255 22999 MCO:SLP:TPD 23001 MCO:SLP:WUP=-1 23005 MCO:SLP:MS=38,SMS=0,I1=1,M1=1,I2=255,M2=255 23009 MCO:SLP:TPD 23011 MCO:SLP:WUP=-1 23015 MCO:SLP:MS=28,SMS=0,I1=1,M1=1,I2=255,M2=255 23019 MCO:SLP:TPD 23021 MCO:SLP:WUP=-1 23025 MCO:SLP:MS=18,SMS=0,I1=1,M1=1,I2=255,M2=255 23029 MCO:SLP:TPD 23031 MCO:SLP:WUP=-1 23035 MCO:SLP:MS=8,SMS=0,I1=1,M1=1,I2=255,M2=255 23040 MCO:SLP:TPD 23044 MCO:SLP:WUP=-1 23046 MCO:SLP:MS=4294967293,SMS=0,I1=1,M1=1,I2=255,M2=255 23052 MCO:SLP:TPDAfter this, there is nothing more on the serial port
-
@esawyja You are right. I made a mistake. This should fix it:
Change this line:uint32_t sleep_time_left = battery_report_time - millis();into this:
long sleep_time_left = battery_report_time - millis();A variable of type long can hold a negative number, but an unsigned long (same as uint32_t) can never hold a negative number (because it is unsigned, no sign, no minus sign, no negative).
So, if (sleep_time_left < 0) will never be true.. That was the mistake.I was also wondering if the generator would produce interrupts without using attachInterrupt().
Without that, you can still poll the generator pin, and see if the value changed (what is happening now), but the sleep() cycle would not be interrupted when the pin changed.
To be on the safe side, i would also add the following to your code:void setup() { attachInterrupt(digitalPinToInterrupt(GENERATOR_PIN), generator_pin_interrupt_handler, CHANGE); }Hopefully that'll make it work as intended.
-
@core_c Thanks for that
I had to change the battery reading routine to this below, else when it gets to the routine, it stays there and never get back to the loop, I hope it makes sensevoid read_batt() { wait(15000); int sensorValue = analogRead(BATTERY_SENSE_PIN); float batteryV = sensorValue * volt_value; send(batt_msg.set(batteryV,2)); long sleep_time_left = battery_report_time - millis(); battery_report_time = millis() + BATTERY_REPORT_INTERVAL; sleep_time_left = BATTERY_REPORT_INTERVAL; return; }If I add this to setup, I get the following error
battery_report_time = millis() + BATTERY_REPORT_INTERVAL; Serial.print("Battery report time is = "); Serial.println(battery_report_time); attachInterrupt(digitalPinToInterrupt(GENERATOR_PIN), generator_pin_interrupt_handler, CHANGE); }gen_run_sketch:54: error: 'generator_pin_interrupt_handler' was not declared in this scope attachInterrupt(digitalPinToInterrupt(GENERATOR_PIN), generator_pin_interrupt_handler, CHANGE); ^ exit status 1 'generator_pin_interrupt_handler' was not declared in this scope
-
@esawyja attachInterrupt() should only be done once, in the setup() function.
-
@core_c I'm sorry I do not understand, must I replace this in loop
sleep(digitalPinToInterrupt(GENERATOR_PIN), CHANGE, sleep_time_left);With this in setup?
attachInterrupt(digitalPinToInterrupt(GENERATOR_PIN), generator_pin_interrupt_handler, CHANGE);Sorry for all the questions!! This is sooo confusing to me, it also seems that the battery level is not sending, I left it running for 12 hours plus and never got a reading, the line
#define BATTERY_REPORT_INTERVAL 60000
Does this define that the battery level must be send ever 60000 milli seconds?
-
If it is a battery powered node you need to use the sleep function to put the node into low power mode.
-
@esawyja i made the changes for you in my post made earlier^^
-
@core_c Thanks so much, I will try these changes!
-
About your battery level send question, here's some explanation:
The intention is to let your node sleep when nothing happens.
Only when the generator pin changes, it interrupts the sleep cycle, and wakes up the node. It then checks the current generator pin state and sends the appropriate message. Then it goes to sleep again.
However, it does not sleep forever. At regular intervals the battery level is send. So every BATTERY_REPORT_INTERVAL milliseconds the current sleep cycle ends (because the timer has counted down and reached its end), and the battery level is send.
The program keeps doing this: Sleep, and wake up if the pin changed, and/or wake up when the battery level should be send.
-
@core_c Thanks, I will try all the changes, thanks again for the code!!
-
@core_c I'm still having problems with this, the generator running or not works a treat, but if I just reboot the node and leave it, it goes through the sleep from what I can see, but then nothing happens after that, it does not send the battery level, it just hangs. Also the #define BATTERY_REPORT_INTERVAL 3000 does not work correctly, I've set it to 3000 as a test and it definitely took longer than 3000 MS, the complete serial log is pasted below, I did not trigger the generator during this period
0 MCO:BGN:INIT NODE,CP=RRNNA--,VER=2.1.1 4 TSM:INIT 4 TSF:WUR:MS=1000 8 TSM:INIT:TSP OK 10 TSM:INIT:STATID=11 12 TSF:SID:OK,ID=11 14 TSM:FPAR 145 TSF:MSG:SEND,11-11-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 395 TSF:MSG:READ,0-0-11,s=255,c=3,t=8,pt=1,l=1,sg=0:0 401 TSF:MSG:FPAR OK,ID=0,D=1 1007 MCO:BGN:STP 1007 !MCO:SND:NODE NOT REG 2152 TSM:FPAR:OK 2152 TSM:ID 2154 TSM:ID:OK 2156 TSM:UPL 2164 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 2215 TSF:MSG:READ,0-0-11,s=255,c=3,t=25,pt=1,l=1,sg=0:1 2222 TSF:MSG:PONG RECV,HP=1 2224 TSM:UPL:OK 2226 TSM:READY:ID=11,PAR=0,DIS=1 2238 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100 2289 TSF:MSG:READ,0-0-11,s=255,c=3,t=15,pt=6,l=2,sg=0:0100 2304 TSF:MSG:SEND,11-11-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.1.1 2320 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0 4327 MCO:REG:REQ 4335 TSF:MSG:SEND,11-11-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2 4386 TSF:MSG:READ,0-0-11,s=255,c=3,t=27,pt=1,l=1,sg=0:1 4392 MCO:PIM:NODE REG=1 11018 TSF:MSG:SEND,11-11-0-0,s=6,c=1,t=2,pt=2,l=2,sg=0,ft=0,st=OK:0 Generator message sent 11026 MCO:BGN:INIT OK,TSP=1 11030 MCO:SLP:MS=2996,SMS=0,I1=1,M1=1,I2=255,M2=255 11036 MCO:SLP:TPD 11038 MCO:SLP:WUP=-1 11042 MCO:SLP:MS=2984,SMS=0,I1=1,M1=1,I2=255,M2=255 11046 MCO:SLP:TPD 11051 MCO:SLP:WUP=-1 11053 MCO:SLP:MS=2973,SMS=0,I1=1,M1=1,I2=255,M2=255 11059 MCO:SLP:TPD 11061 MCO:SLP:WUP=-1 11063 MCO:SLP:MS=2963,SMS=0,I1=1,M1=1,I2=255,M2=255 11069 MCO:SLP:TPD 11071 MCO:SLP:WUP=-1 11073 MCO:SLP:MS=2953,SMS=0,I1=1,M1=1,I2=255,M2=255 11079 MCO:SLP:TPD 11081 MCO:SLP:WUP=-1 11085 MCO:SLP:MS=2941,SMS=0,I1=1,M1=1,I2=255,M2=255 11089 MCO:SLP:TPD 11094 MCO:SLP:WUP=-1 11096 MCO:SLP:MS=2930,SMS=0,I1=1,M1=1,I2=255,M2=255 11102 MCO:SLP:TPD 11104 MCO:SLP:WUP=-1 11106 MCO:SLP:MS=2920,SMS=0,I1=1,M1=1,I2=255,M2=255 11112 MCO:SLP:TPD 11114 MCO:SLP:WUP=-1 11118 MCO:SLP:MS=2908,SMS=0,I1=1,M1=1,I2=255,M2=255 11122 MCO:SLP:TPD 11124 MCO:SLP:WUP=-1 11128 MCO:SLP:MS=2898,SMS=0,I1=1,M1=1,I2=255,M2=255 11134 MCO:SLP:TPD 11137 MCO:SLP:WUP=-1 11139 MCO:SLP:MS=2887,SMS=0,I1=1,M1=1,I2=255,M2=255 11145 MCO:SLP:TPD 11147 MCO:SLP:WUP=-1 11149 MCO:SLP:MS=2877,SMS=0,I1=1,M1=1,I2=255,M2=255 11155 MCO:SLP:TPD 11157 MCO:SLP:WUP=-1 11161 MCO:SLP:MS=2865,SMS=0,I1=1,M1=1,I2=255,M2=255 11165 MCO:SLP:TPD 11167 MCO:SLP:WUP=-1 11171 MCO:SLP:MS=2855,SMS=0,I1=1,M1=1,I2=255,M2=255 11177 MCO:SLP:TPD 11180 MCO:SLP:WUP=-1 11182 MCO:SLP:MS=2844,SMS=0,I1=1,M1=1,I2=255,M2=255 11188 MCO:SLP:TPD 11190 MCO:SLP:WUP=-1 11192 MCO:SLP:MS=2834,SMS=0,I1=1,M1=1,I2=255,M2=255 11198 MCO:SLP:TPD 11200 MCO:SLP:WUP=-1 11204 MCO:SLP:MS=2822,SMS=0,I1=1,M1=1,I2=255,M2=255 11208 MCO:SLP:TPD 11212 MCO:SLP:WUP=-1 11214 MCO:SLP:MS=2812,SMS=0,I1=1,M1=1,I2=255,M2=255 11220 MCO:SLP:TPD 11223 MCO:SLP:WUP=-1 11225 MCO:SLP:MS=2801,SMS=0,I1=1,M1=1,I2=255,M2=255 11231 MCO:SLP:TPD 11233 MCO:SLP:WUP=-1 11235 MCO:SLP:MS=2791,SMS=0,I1=1,M1=1,I2=255,M2=255 11241 MCO:SLP:TPD 11243 MCO:SLP:WUP=-1 11247 MCO:SLP:MS=2779,SMS=0,I1=1,M1=1,I2=255,M2=255 11251 MCO:SLP:TPD 11255 MCO:SLP:WUP=-1 11257 MCO:SLP:MS=2769,SMS=0,I1=1,M1=1,I2=255,M2=255 11264 MCO:SLP:TPD 11266 MCO:SLP:WUP=-1 11268 MCO:SLP:MS=2758,SMS=0,I1=1,M1=1,I2=255,M2=255 11274 MCO:SLP:TPD 11276 MCO:SLP:WUP=-1 11278 MCO:SLP:MS=2748,SMS=0,I1=1,M1=1,I2=255,M2=255 11284 MCO:SLP:TPD 11286 MCO:SLP:WUP=-1 11290 MCO:SLP:MS=2736,SMS=0,I1=1,M1=1,I2=255,M2=255 11294 MCO:SLP:TPD 11298 MCO:SLP:WUP=-1 11300 MCO:SLP:MS=2726,SMS=0,I1=1,M1=1,I2=255,M2=255 11307 MCO:SLP:TPD 11309 MCO:SLP:WUP=-1 11311 MCO:SLP:MS=2715,SMS=0,I1=1,M1=1,I2=255,M2=255 11317 MCO:SLP:TPD 11319 MCO:SLP:WUP=-1 11323 MCO:SLP:MS=2703,SMS=0,I1=1,M1=1,I2=255,M2=255 11327 MCO:SLP:TPD 11329 MCO:SLP:WUP=-1 11333 MCO:SLP:MS=2693,SMS=0,I1=1,M1=1,I2=255,M2=255 11339 MCO:SLP:TPD 11341 MCO:SLP:WUP=-1 11343 MCO:SLP:MS=2683,SMS=0,I1=1,M1=1,I2=255,M2=255 11350 MCO:SLP:TPD 11352 MCO:SLP:WUP=-1 11354 MCO:SLP:MS=2672,SMS=0,I1=1,M1=1,I2=255,M2=255 11360 MCO:SLP:TPD 11362 MCO:SLP:WUP=-1 11366 MCO:SLP:MS=2660,SMS=0,I1=1,M1=1,I2=255,M2=255 11370 MCO:SLP:TPD 11372 MCO:SLP:WUP=-1 11376 MCO:SLP:MS=2650,SMS=0,I1=1,M1=1,I2=255,M2=255 11382 MCO:SLP:TPD 11384 MCO:SLP:WUP=-1 11386 MCO:SLP:MS=2640,SMS=0,I1=1,M1=1,I2=255,M2=255 11393 MCO:SLP:TPD 11395 MCO:SLP:WUP=-1 11397 MCO:SLP:MS=2629,SMS=0,I1=1,M1=1,I2=255,M2=255 11403 MCO:SLP:TPD 11405 MCO:SLP:WUP=-1 11409 MCO:SLP:MS=2617,SMS=0,I1=1,M1=1,I2=255,M2=255 11413 MCO:SLP:TPD 11415 MCO:SLP:WUP=-1 11419 MCO:SLP:MS=2607,SMS=0,I1=1,M1=1,I2=255,M2=255 11425 MCO:SLP:TPD 11427 MCO:SLP:WUP=-1 11429 MCO:SLP:MS=2597,SMS=0,I1=1,M1=1,I2=255,M2=255 11436 MCO:SLP:TPD 11438 MCO:SLP:WUP=-1 11440 MCO:SLP:MS=2586,SMS=0,I1=1,M1=1,I2=255,M2=255 11446 MCO:SLP:TPD 11448 MCO:SLP:WUP=-1 11452 MCO:SLP:MS=2574,SMS=0,I1=1,M1=1,I2=255,M2=255 11456 MCO:SLP:TPD 11458 MCO:SLP:WUP=-1 11462 MCO:SLP:MS=2564,SMS=0,I1=1,M1=1,I2=255,M2=255 11468 MCO:SLP:TPD 11470 MCO:SLP:WUP=-1 11472 MCO:SLP:MS=2554,SMS=0,I1=1,M1=1,I2=255,M2=255 11479 MCO:SLP:TPD 11481 MCO:SLP:WUP=-1 11483 MCO:SLP:MS=2543,SMS=0,I1=1,M1=1,I2=255,M2=255 11489 MCO:SLP:TPD 11491 MCO:SLP:WUP=-1 11495 MCO:SLP:MS=2531,SMS=0,I1=1,M1=1,I2=255,M2=255 11499 MCO:SLP:TPD 11503 MCO:SLP:WUP=-1 11505 MCO:SLP:MS=2521,SMS=0,I1=1,M1=1,I2=255,M2=255 11511 MCO:SLP:TPD 11513 MCO:SLP:WUP=-1 11515 MCO:SLP:MS=2511,SMS=0,I1=1,M1=1,I2=255,M2=255 11522 MCO:SLP:TPD 11524 MCO:SLP:WUP=-1 11526 MCO:SLP:MS=2500,SMS=0,I1=1,M1=1,I2=255,M2=255 11532 MCO:SLP:TPD 11534 MCO:SLP:WUP=-1 11538 MCO:SLP:MS=2488,SMS=0,I1=1,M1=1,I2=255,M2=255 11542 MCO:SLP:TPD 11544 MCO:SLP:WUP=-1 11548 MCO:SLP:MS=2478,SMS=0,I1=1,M1=1,I2=255,M2=255 11554 MCO:SLP:TPD 11556 MCO:SLP:WUP=-1 11558 MCO:SLP:MS=2468,SMS=0,I1=1,M1=1,I2=255,M2=255 11565 MCO:SLP:TPD 11567 MCO:SLP:WUP=-1 11569 MCO:SLP:MS=2457,SMS=0,I1=1,M1=1,I2=255,M2=255 11575 MCO:SLP:TPD 11577 MCO:SLP:WUP=-1 11581 MCO:SLP:MS=2445,SMS=0,I1=1,M1=1,I2=255,M2=255 11585 MCO:SLP:TPD 11589 MCO:SLP:WUP=-1 11591 MCO:SLP:MS=2435,SMS=0,I1=1,M1=1,I2=255,M2=255 11597 MCO:SLP:TPD 11599 MCO:SLP:WUP=-1 11601 MCO:SLP:MS=2425,SMS=0,I1=1,M1=1,I2=255,M2=255 11608 MCO:SLP:TPD 11610 MCO:SLP:WUP=-1 11612 MCO:SLP:MS=2414,SMS=0,I1=1,M1=1,I2=255,M2=255 11618 MCO:SLP:TPD 11620 MCO:SLP:WUP=-1 11624 MCO:SLP:MS=2402,SMS=0,I1=1,M1=1,I2=255,M2=255 11628 MCO:SLP:TPD 11632 MCO:SLP:WUP=-1 11634 MCO:SLP:MS=2392,SMS=0,I1=1,M1=1,I2=255,M2=255 11640 MCO:SLP:TPD 11642 MCO:SLP:WUP=-1 11644 MCO:SLP:MS=2382,SMS=0,I1=1,M1=1,I2=255,M2=255 11651 MCO:SLP:TPD 11653 MCO:SLP:WUP=-1 11655 MCO:SLP:MS=2371,SMS=0,I1=1,M1=1,I2=255,M2=255 11661 MCO:SLP:TPD 11663 MCO:SLP:WUP=-1 11667 MCO:SLP:MS=2359,SMS=0,I1=1,M1=1,I2=255,M2=255 11671 MCO:SLP:TPD 11675 MCO:SLP:WUP=-1 11677 MCO:SLP:MS=2349,SMS=0,I1=1,M1=1,I2=255,M2=255 11683 MCO:SLP:TPD 11685 MCO:SLP:WUP=-1 11687 MCO:SLP:MS=2339,SMS=0,I1=1,M1=1,I2=255,M2=255 11694 MCO:SLP:TPD 11696 MCO:SLP:WUP=-1 11698 MCO:SLP:MS=2328,SMS=0,I1=1,M1=1,I2=255,M2=255 11704 MCO:SLP:TPD 11706 MCO:SLP:WUP=-1 11710 MCO:SLP:MS=2316,SMS=0,I1=1,M1=1,I2=255,M2=255 11714 MCO:SLP:TPD 11716 MCO:SLP:WUP=-1 11720 MCO:SLP:MS=2306,SMS=0,I1=1,M1=1,I2=255,M2=255 11726 MCO:SLP:TPD 11728 MCO:SLP:WUP=-1 11730 MCO:SLP:MS=2296,SMS=0,I1=1,M1=1,I2=255,M2=255 11737 MCO:SLP:TPD 11739 MCO:SLP:WUP=-1 11741 MCO:SLP:MS=2285,SMS=0,I1=1,M1=1,I2=255,M2=255 11747 MCO:SLP:TPD 11749 MCO:SLP:WUP=-1 11753 MCO:SLP:MS=2273,SMS=0,I1=1,M1=1,I2=255,M2=255 11757 MCO:SLP:TPD 11759 MCO:SLP:WUP=-1 11763 MCO:SLP:MS=2263,SMS=0,I1=1,M1=1,I2=255,M2=255 11769 MCO:SLP:TPD 11771 MCO:SLP:WUP=-1 11773 MCO:SLP:MS=2253,SMS=0,I1=1,M1=1,I2=255,M2=255 11780 MCO:SLP:TPD 11782 MCO:SLP:WUP=-1 11784 MCO:SLP:MS=2242,SMS=0,I1=1,M1=1,I2=255,M2=255 11790 MCO:SLP:TPD 11792 MCO:SLP:WUP=-1 11796 MCO:SLP:MS=2230,SMS=0,I1=1,M1=1,I2=255,M2=255 11800 MCO:SLP:TPD 11802 MCO:SLP:WUP=-1 11806 MCO:SLP:MS=2220,SMS=0,I1=1,M1=1,I2=255,M2=255 11812 MCO:SLP:TPD 11814 MCO:SLP:WUP=-1 11816 MCO:SLP:MS=2210,SMS=0,I1=1,M1=1,I2=255,M2=255 11823 MCO:SLP:TPD 11825 MCO:SLP:WUP=-1 11827 MCO:SLP:MS=2199,SMS=0,I1=1,M1=1,I2=255,M2=255 11833 MCO:SLP:TPD 11835 MCO:SLP:WUP=-1 11839 MCO:SLP:MS=2187,SMS=0,I1=1,M1=1,I2=255,M2=255 11843 MCO:SLP:TPD 11845 MCO:SLP:WUP=-1 11849 MCO:SLP:MS=2177,SMS=0,I1=1,M1=1,I2=255,M2=255 11855 MCO:SLP:TPD 11857 MCO:SLP:WUP=-1 11859 MCO:SLP:MS=2167,SMS=0,I1=1,M1=1,I2=255,M2=255 11866 MCO:SLP:TPD 11868 MCO:SLP:WUP=-1 11870 MCO:SLP:MS=2156,SMS=0,I1=1,M1=1,I2=255,M2=255 11876 MCO:SLP:TPD 11878 MCO:SLP:WUP=-1 11882 MCO:SLP:MS=2146,SMS=0,I1=1,M1=1,I2=255,M2=255 11886 MCO:SLP:TPD 11888 MCO:SLP:WUP=-1 11892 MCO:SLP:MS=2134,SMS=0,I1=1,M1=1,I2=255,M2=255 11898 MCO:SLP:TPD 11900 MCO:SLP:WUP=-1 11902 MCO:SLP:MS=2124,SMS=0,I1=1,M1=1,I2=255,M2=255 11909 MCO:SLP:TPD 11911 MCO:SLP:WUP=-1 11913 MCO:SLP:MS=2113,SMS=0,I1=1,M1=1,I2=255,M2=255 11919 MCO:SLP:TPD 11921 MCO:SLP:WUP=-1 11923 MCO:SLP:MS=2103,SMS=0,I1=1,M1=1,I2=255,M2=255 11929 MCO:SLP:TPD 11931 MCO:SLP:WUP=-1 11935 MCO:SLP:MS=2091,SMS=0,I1=1,M1=1,I2=255,M2=255 11939 MCO:SLP:TPD 11943 MCO:SLP:WUP=-1 11945 MCO:SLP:MS=2081,SMS=0,I1=1,M1=1,I2=255,M2=255 11952 MCO:SLP:TPD 11954 MCO:SLP:WUP=-1 11956 MCO:SLP:MS=2070,SMS=0,I1=1,M1=1,I2=255,M2=255 11962 MCO:SLP:TPD 11964 MCO:SLP:WUP=-1 11966 MCO:SLP:MS=2060,SMS=0,I1=1,M1=1,I2=255,M2=255 11972 MCO:SLP:TPD 11974 MCO:SLP:WUP=-1 11978 MCO:SLP:MS=2048,SMS=0,I1=1,M1=1,I2=255,M2=255 11982 MCO:SLP:TPD 11984 MCO:SLP:WUP=-1 11988 MCO:SLP:MS=2038,SMS=0,I1=1,M1=1,I2=255,M2=255 11995 MCO:SLP:TPD 11997 MCO:SLP:WUP=-1 11999 MCO:SLP:MS=2027,SMS=0,I1=1,M1=1,I2=255,M2=255 12005 MCO:SLP:TPD 12007 MCO:SLP:WUP=-1 12009 MCO:SLP:MS=2017,SMS=0,I1=1,M1=1,I2=255,M2=255 12015 MCO:SLP:TPD 12017 MCO:SLP:WUP=-1 12019 MCO:SLP:MS=2007,SMS=0,I1=1,M1=1,I2=255,M2=255 12025 MCO:SLP:TPD 12027 MCO:SLP:WUP=-1 12032 MCO:SLP:MS=1994,SMS=0,I1=1,M1=1,I2=255,M2=255 12036 MCO:SLP:TPD 12040 MCO:SLP:WUP=-1 12042 MCO:SLP:MS=1984,SMS=0,I1=1,M1=1,I2=255,M2=255 12048 MCO:SLP:TPD 12050 MCO:SLP:WUP=-1 12052 MCO:SLP:MS=1974,SMS=0,I1=1,M1=1,I2=255,M2=255 12058 MCO:SLP:TPD 12060 MCO:SLP:WUP=-1 12062 MCO:SLP:MS=1964,SMS=0,I1=1,M1=1,I2=255,M2=255 12068 MCO:SLP:TPD 12070 MCO:SLP:WUP=-1 12075 MCO:SLP:MS=1951,SMS=0,I1=1,M1=1,I2=255,M2=255 12079 MCO:SLP:TPD 12083 MCO:SLP:WUP=-1 12085 MCO:SLP:MS=1941,SMS=0,I1=1,M1=1,I2=255,M2=255 12091 MCO:SLP:TPD 12093 MCO:SLP:WUP=-1 12095 MCO:SLP:MS=1931,SMS=0,I1=1,M1=1,I2=255,M2=255 12101 MCO:SLP:TPD 12103 MCO:SLP:WUP=-1 12105 MCO:SLP:MS=1921,SMS=0,I1=1,M1=1,I2=255,M2=255 12111 MCO:SLP:TPD 12113 MCO:SLP:WUP=-1 12118 MCO:SLP:MS=1908,SMS=0,I1=1,M1=1,I2=255,M2=255 12122 MCO:SLP:TPD 12126 MCO:SLP:WUP=-1 12128 MCO:SLP:MS=1898,SMS=0,I1=1,M1=1,I2=255,M2=255 12134 MCO:SLP:TPD 12136 MCO:SLP:WUP=-1 12138 MCO:SLP:MS=1888,SMS=0,I1=1,M1=1,I2=255,M2=255 12144 MCO:SLP:TPD 12146 MCO:SLP:WUP=-1 12148 MCO:SLP:MS=1878,SMS=0,I1=1,M1=1,I2=255,M2=255 12154 MCO:SLP:TPD 12156 MCO:SLP:WUP=-1 12161 MCO:SLP:MS=1865,SMS=0,I1=1,M1=1,I2=255,M2=255 12165 MCO:SLP:TPD 12169 MCO:SLP:WUP=-1 12171 MCO:SLP:MS=1855,SMS=0,I1=1,M1=1,I2=255,M2=255 12177 MCO:SLP:TPD 12179 MCO:SLP:WUP=-1 12181 MCO:SLP:MS=1845,SMS=0,I1=1,M1=1,I2=255,M2=255 12187 MCO:SLP:TPD 12189 MCO:SLP:WUP=-1 12191 MCO:SLP:MS=1835,SMS=0,I1=1,M1=1,I2=255,M2=255 12197 MCO:SLP:TPD 12199 MCO:SLP:WUP=-1 12204 MCO:SLP:MS=1822,SMS=0,I1=1,M1=1,I2=255,M2=255 12208 MCO:SLP:TPD 12210 MCO:SLP:WUP=-1 12214 MCO:SLP:MS=1812,SMS=0,I1=1,M1=1,I2=255,M2=255 12220 MCO:SLP:TPD 12222 MCO:SLP:WUP=-1 12224 MCO:SLP:MS=1802,SMS=0,I1=1,M1=1,I2=255,M2=255 12230 MCO:SLP:TPD 12232 MCO:SLP:WUP=-1 12234 MCO:SLP:MS=1792,SMS=0,I1=1,M1=1,I2=255,M2=255 12240 MCO:SLP:TPD 12242 MCO:SLP:WUP=-1 12247 MCO:SLP:MS=1779,SMS=0,I1=1,M1=1,I2=255,M2=255 12251 MCO:SLP:TPD 12253 MCO:SLP:WUP=-1 12257 MCO:SLP:MS=1769,SMS=0,I1=1,M1=1,I2=255,M2=255 12263 MCO:SLP:TPD 12265 MCO:SLP:WUP=-1 12267 MCO:SLP:MS=1759,SMS=0,I1=1,M1=1,I2=255,M2=255 12273 MCO:SLP:TPD 12275 MCO:SLP:WUP=-1 12277 MCO:SLP:MS=1749,SMS=0,I1=1,M1=1,I2=255,M2=255 12283 MCO:SLP:TPD 12285 MCO:SLP:WUP=-1 12290 MCO:SLP:MS=1736,SMS=0,I1=1,M1=1,I2=255,M2=255 12294 MCO:SLP:TPD 12296 MCO:SLP:WUP=-1 12300 MCO:SLP:MS=1726,SMS=0,I1=1,M1=1,I2=255,M2=255 12306 MCO:SLP:TPD 12308 MCO:SLP:WUP=-1 12310 MCO:SLP:MS=1716,SMS=0,I1=1,M1=1,I2=255,M2=255 12316 MCO:SLP:TPD 12318 MCO:SLP:WUP=-1 12320 MCO:SLP:MS=1706,SMS=0,I1=1,M1=1,I2=255,M2=255 12326 MCO:SLP:TPD 12328 MCO:SLP:WUP=-1 12333 MCO:SLP:MS=1693,SMS=0,I1=1,M1=1,I2=255,M2=255 12337 MCO:SLP:TPD 12339 MCO:SLP:WUP=-1 12343 MCO:SLP:MS=1683,SMS=0,I1=1,M1=1,I2=255,M2=255 12349 MCO:SLP:TPD 12351 MCO:SLP:WUP=-1 12353 MCO:SLP:MS=1673,SMS=0,I1=1,M1=1,I2=255,M2=255 12359 MCO:SLP:TPD 12361 MCO:SLP:WUP=-1 12363 MCO:SLP:MS=1663,SMS=0,I1=1,M1=1,I2=255,M2=255 12369 MCO:SLP:TPD 12371 MCO:SLP:WUP=-1 12374 MCO:SLP:MS=1652,SMS=0,I1=1,M1=1,I2=255,M2=255 12380 MCO:SLP:TPD 12382 MCO:SLP:WUP=-1 12386 MCO:SLP:MS=1640,SMS=0,I1=1,M1=1,I2=255,M2=255 12390 MCO:SLP:TPD 12394 MCO:SLP:WUP=-1 12396 MCO:SLP:MS=1630,SMS=0,I1=1,M1=1,I2=255,M2=255 12402 MCO:SLP:TPD 12404 MCO:SLP:WUP=-1 12406 MCO:SLP:MS=1620,SMS=0,I1=1,M1=1,I2=255,M2=255 12412 MCO:SLP:TPD 12414 MCO:SLP:WUP=-1 12417 MCO:SLP:MS=1609,SMS=0,I1=1,M1=1,I2=255,M2=255 12423 MCO:SLP:TPD 12425 MCO:SLP:WUP=-1 12429 MCO:SLP:MS=1597,SMS=0,I1=1,M1=1,I2=255,M2=255 12433 MCO:SLP:TPD 12437 MCO:SLP:WUP=-1 12439 MCO:SLP:MS=1587,SMS=0,I1=1,M1=1,I2=255,M2=255 12445 MCO:SLP:TPD 12447 MCO:SLP:WUP=-1 12449 MCO:SLP:MS=1577,SMS=0,I1=1,M1=1,I2=255,M2=255 12455 MCO:SLP:TPD 12457 MCO:SLP:WUP=-1 12460 MCO:SLP:MS=1566,SMS=0,I1=1,M1=1,I2=255,M2=255 12466 MCO:SLP:TPD 12468 MCO:SLP:WUP=-1 12472 MCO:SLP:MS=1554,SMS=0,I1=1,M1=1,I2=255,M2=255 12476 MCO:SLP:TPD 12478 MCO:SLP:WUP=-1 12482 MCO:SLP:MS=1544,SMS=0,I1=1,M1=1,I2=255,M2=255 12488 MCO:SLP:TPD 12490 MCO:SLP:WUP=-1 12492 MCO:SLP:MS=1534,SMS=0,I1=1,M1=1,I2=255,M2=255 12498 MCO:SLP:TPD 12500 MCO:SLP:WUP=-1 12503 MCO:SLP:MS=1523,SMS=0,I1=1,M1=1,I2=255,M2=255 12509 MCO:SLP:TPD 12511 MCO:SLP:WUP=-1 12515 MCO:SLP:MS=1511,SMS=0,I1=1,M1=1,I2=255,M2=255 12519 MCO:SLP:TPD 12521 MCO:SLP:WUP=-1 12525 MCO:SLP:MS=1501,SMS=0,I1=1,M1=1,I2=255,M2=255 12531 MCO:SLP:TPD 12533 MCO:SLP:WUP=-1 12535 MCO:SLP:MS=1491,SMS=0,I1=1,M1=1,I2=255,M2=255 12541 MCO:SLP:TPD 12544 MCO:SLP:WUP=-1 12546 MCO:SLP:MS=1480,SMS=0,I1=1,M1=1,I2=255,M2=255 12552 MCO:SLP:TPD 12554 MCO:SLP:WUP=-1 12558 MCO:SLP:MS=1468,SMS=0,I1=1,M1=1,I2=255,M2=255 12562 MCO:SLP:TPD 12564 MCO:SLP:WUP=-1 12568 MCO:SLP:MS=1458,SMS=0,I1=1,M1=1,I2=255,M2=255 12574 MCO:SLP:TPD 12576 MCO:SLP:WUP=-1 12578 MCO:SLP:MS=1448,SMS=0,I1=1,M1=1,I2=255,M2=255 12584 MCO:SLP:TPD 12587 MCO:SLP:WUP=-1 12589 MCO:SLP:MS=1437,SMS=0,I1=1,M1=1,I2=255,M2=255 12595 MCO:SLP:TPD 12597 MCO:SLP:WUP=-1 12601 MCO:SLP:MS=1425,SMS=0,I1=1,M1=1,I2=255,M2=255 12605 MCO:SLP:TPD 12607 MCO:SLP:WUP=-1 12611 MCO:SLP:MS=1415,SMS=0,I1=1,M1=1,I2=255,M2=255 12617 MCO:SLP:TPD 12619 MCO:SLP:WUP=-1 12621 MCO:SLP:MS=1405,SMS=0,I1=1,M1=1,I2=255,M2=255 12627 MCO:SLP:TPD 12630 MCO:SLP:WUP=-1 12632 MCO:SLP:MS=1394,SMS=0,I1=1,M1=1,I2=255,M2=255 12638 MCO:SLP:TPD 12640 MCO:SLP:WUP=-1 12644 MCO:SLP:MS=1382,SMS=0,I1=1,M1=1,I2=255,M2=255 12648 MCO:SLP:TPD 12650 MCO:SLP:WUP=-1 12654 MCO:SLP:MS=1372,SMS=0,I1=1,M1=1,I2=255,M2=255 12658 MCO:SLP:TPD 12662 MCO:SLP:WUP=-1 12664 MCO:SLP:MS=1362,SMS=0,I1=1,M1=1,I2=255,M2=255 12670 MCO:SLP:TPD 12673 MCO:SLP:WUP=-1 12675 MCO:SLP:MS=1351,SMS=0,I1=1,M1=1,I2=255,M2=255 12681 MCO:SLP:TPD 12683 MCO:SLP:WUP=-1 12685 MCO:SLP:MS=1341,SMS=0,I1=1,M1=1,I2=255,M2=255 12691 MCO:SLP:TPD 12693 MCO:SLP:WUP=-1 12697 MCO:SLP:MS=1329,SMS=0,I1=1,M1=1,I2=255,M2=255 12701 MCO:SLP:TPD 12705 MCO:SLP:WUP=-1 12707 MCO:SLP:MS=1319,SMS=0,I1=1,M1=1,I2=255,M2=255 12713 MCO:SLP:TPD 12716 MCO:SLP:WUP=-1 12718 MCO:SLP:MS=1308,SMS=0,I1=1,M1=1,I2=255,M2=255 12724 MCO:SLP:TPD 12726 MCO:SLP:WUP=-1 12728 MCO:SLP:MS=1298,SMS=0,I1=1,M1=1,I2=255,M2=255 12734 MCO:SLP:TPD 12736 MCO:SLP:WUP=-1 12740 MCO:SLP:MS=1286,SMS=0,I1=1,M1=1,I2=255,M2=255 12744 MCO:SLP:TPD 12748 MCO:SLP:WUP=-1 12750 MCO:SLP:MS=1276,SMS=0,I1=1,M1=1,I2=255,M2=255 12756 MCO:SLP:TPD 12759 MCO:SLP:WUP=-1 12761 MCO:SLP:MS=1265,SMS=0,I1=1,M1=1,I2=255,M2=255 12767 MCO:SLP:TPD 12769 MCO:SLP:WUP=-1 12771 MCO:SLP:MS=1255,SMS=0,I1=1,M1=1,I2=255,M2=255 12777 MCO:SLP:TPD 12779 MCO:SLP:WUP=-1 12783 MCO:SLP:MS=1243,SMS=0,I1=1,M1=1,I2=255,M2=255 12787 MCO:SLP:TPD 12791 MCO:SLP:WUP=-1 12793 MCO:SLP:MS=1233,SMS=0,I1=1,M1=1,I2=255,M2=255 12800 MCO:SLP:TPD 12802 MCO:SLP:WUP=-1 12804 MCO:SLP:MS=1222,SMS=0,I1=1,M1=1,I2=255,M2=255 12810 MCO:SLP:TPD 12812 MCO:SLP:WUP=-1 12814 MCO:SLP:MS=1212,SMS=0,I1=1,M1=1,I2=255,M2=255 12820 MCO:SLP:TPD 12822 MCO:SLP:WUP=-1 12826 MCO:SLP:MS=1200,SMS=0,I1=1,M1=1,I2=255,M2=255 12830 MCO:SLP:TPD 12832 MCO:SLP:WUP=-1 12836 MCO:SLP:MS=1190,SMS=0,I1=1,M1=1,I2=255,M2=255 12843 MCO:SLP:TPD 12845 MCO:SLP:WUP=-1 12847 MCO:SLP:MS=1179,SMS=0,I1=1,M1=1,I2=255,M2=255 12853 MCO:SLP:TPD 12855 MCO:SLP:WUP=-1 12857 MCO:SLP:MS=1169,SMS=0,I1=1,M1=1,I2=255,M2=255 12863 MCO:SLP:TPD 12865 MCO:SLP:WUP=-1 12869 MCO:SLP:MS=1157,SMS=0,I1=1,M1=1,I2=255,M2=255 12873 MCO:SLP:TPD 12875 MCO:SLP:WUP=-1 12879 MCO:SLP:MS=1147,SMS=0,I1=1,M1=1,I2=255,M2=255 12886 MCO:SLP:TPD 12888 MCO:SLP:WUP=-1 12890 MCO:SLP:MS=1136,SMS=0,I1=1,M1=1,I2=255,M2=255 12896 MCO:SLP:TPD 12898 MCO:SLP:WUP=-1 12900 MCO:SLP:MS=1126,SMS=0,I1=1,M1=1,I2=255,M2=255 12906 MCO:SLP:TPD 12908 MCO:SLP:WUP=-1 12912 MCO:SLP:MS=1114,SMS=0,I1=1,M1=1,I2=255,M2=255 12916 MCO:SLP:TPD 12918 MCO:SLP:WUP=-1 12922 MCO:SLP:MS=1104,SMS=0,I1=1,M1=1,I2=255,M2=255 12929 MCO:SLP:TPD 12931 MCO:SLP:WUP=-1 12933 MCO:SLP:MS=1093,SMS=0,I1=1,M1=1,I2=255,M2=255 12939 MCO:SLP:TPD 12941 MCO:SLP:WUP=-1 12943 MCO:SLP:MS=1083,SMS=0,I1=1,M1=1,I2=255,M2=255 12949 MCO:SLP:TPD 12951 MCO:SLP:WUP=-1 12955 MCO:SLP:MS=1071,SMS=0,I1=1,M1=1,I2=255,M2=255 12959 MCO:SLP:TPD 12961 MCO:SLP:WUP=-1 12965 MCO:SLP:MS=1061,SMS=0,I1=1,M1=1,I2=255,M2=255 12972 MCO:SLP:TPD 12974 MCO:SLP:WUP=-1 12976 MCO:SLP:MS=1050,SMS=0,I1=1,M1=1,I2=255,M2=255 12982 MCO:SLP:TPD 12984 MCO:SLP:WUP=-1 12986 MCO:SLP:MS=1040,SMS=0,I1=1,M1=1,I2=255,M2=255 12992 MCO:SLP:TPD 12994 MCO:SLP:WUP=-1 12998 MCO:SLP:MS=1028,SMS=0,I1=1,M1=1,I2=255,M2=255 13002 MCO:SLP:TPD 13004 MCO:SLP:WUP=-1 13008 MCO:SLP:MS=1018,SMS=0,I1=1,M1=1,I2=255,M2=255 13015 MCO:SLP:TPD 13017 MCO:SLP:WUP=-1 13019 MCO:SLP:MS=1007,SMS=0,I1=1,M1=1,I2=255,M2=255 13025 MCO:SLP:TPD 13027 MCO:SLP:WUP=-1 13029 MCO:SLP:MS=997,SMS=0,I1=1,M1=1,I2=255,M2=255 13035 MCO:SLP:TPD 13037 MCO:SLP:WUP=-1 13039 MCO:SLP:MS=987,SMS=0,I1=1,M1=1,I2=255,M2=255 13045 MCO:SLP:TPD 13047 MCO:SLP:WUP=-1 13051 MCO:SLP:MS=975,SMS=0,I1=1,M1=1,I2=255,M2=255 13056 MCO:SLP:TPD 13058 MCO:SLP:WUP=-1 13062 MCO:SLP:MS=964,SMS=0,I1=1,M1=1,I2=255,M2=255 13068 MCO:SLP:TPD 13070 MCO:SLP:WUP=-1 13072 MCO:SLP:MS=954,SMS=0,I1=1,M1=1,I2=255,M2=255 13078 MCO:SLP:TPD 13080 MCO:SLP:WUP=-1 13082 MCO:SLP:MS=944,SMS=0,I1=1,M1=1,I2=255,M2=255 13088 MCO:SLP:TPD 13090 MCO:SLP:WUP=-1 13092 MCO:SLP:MS=934,SMS=0,I1=1,M1=1,I2=255,M2=255 13099 MCO:SLP:TPD 13101 MCO:SLP:WUP=-1 13105 MCO:SLP:MS=921,SMS=0,I1=1,M1=1,I2=255,M2=255 13109 MCO:SLP:TPD 13111 MCO:SLP:WUP=-1 13115 MCO:SLP:MS=911,SMS=0,I1=1,M1=1,I2=255,M2=255 13121 MCO:SLP:TPD 13123 MCO:SLP:WUP=-1 13125 MCO:SLP:MS=901,SMS=0,I1=1,M1=1,I2=255,M2=255 13131 MCO:SLP:TPD 13133 MCO:SLP:WUP=-1 13135 MCO:SLP:MS=891,SMS=0,I1=1,M1=1,I2=255,M2=255 13142 MCO:SLP:TPD 13144 MCO:SLP:WUP=-1 13146 MCO:SLP:MS=880,SMS=0,I1=1,M1=1,I2=255,M2=255 13152 MCO:SLP:TPD 13154 MCO:SLP:WUP=-1 13158 MCO:SLP:MS=868,SMS=0,I1=1,M1=1,I2=255,M2=255 13162 MCO:SLP:TPD 13164 MCO:SLP:WUP=-1 13168 MCO:SLP:MS=858,SMS=0,I1=1,M1=1,I2=255,M2=255 13174 MCO:SLP:TPD 13176 MCO:SLP:WUP=-1 13178 MCO:SLP:MS=848,SMS=0,I1=1,M1=1,I2=255,M2=255 13185 MCO:SLP:TPD 13187 MCO:SLP:WUP=-1 13189 MCO:SLP:MS=837,SMS=0,I1=1,M1=1,I2=255,M2=255 13195 MCO:SLP:TPD 13197 MCO:SLP:WUP=-1 13199 MCO:SLP:MS=827,SMS=0,I1=1,M1=1,I2=255,M2=255 13205 MCO:SLP:TPD 13207 MCO:SLP:WUP=-1 13211 MCO:SLP:MS=815,SMS=0,I1=1,M1=1,I2=255,M2=255 13215 MCO:SLP:TPD 13217 MCO:SLP:WUP=-1 13221 MCO:SLP:MS=805,SMS=0,I1=1,M1=1,I2=255,M2=255 13228 MCO:SLP:TPD 13230 MCO:SLP:WUP=-1 13232 MCO:SLP:MS=794,SMS=0,I1=1,M1=1,I2=255,M2=255 13238 MCO:SLP:TPD 13240 MCO:SLP:WUP=-1 13242 MCO:SLP:MS=784,SMS=0,I1=1,M1=1,I2=255,M2=255 13248 MCO:SLP:TPD 13250 MCO:SLP:WUP=-1 13252 MCO:SLP:MS=774,SMS=0,I1=1,M1=1,I2=255,M2=255 13258 MCO:SLP:TPD 13260 MCO:SLP:WUP=-1 13264 MCO:SLP:MS=762,SMS=0,I1=1,M1=1,I2=255,M2=255 13268 MCO:SLP:TPD 13271 MCO:SLP:WUP=-1 13275 MCO:SLP:MS=751,SMS=0,I1=1,M1=1,I2=255,M2=255 13279 MCO:SLP:TPD 13283 MCO:SLP:WUP=-1 13285 MCO:SLP:MS=741,SMS=0,I1=1,M1=1,I2=255,M2=255 13291 MCO:SLP:TPD 13293 MCO:SLP:WUP=-1 13295 MCO:SLP:MS=731,SMS=0,I1=1,M1=1,I2=255,M2=255 13301 MCO:SLP:TPD 13303 MCO:SLP:WUP=-1 13305 MCO:SLP:MS=721,SMS=0,I1=1,M1=1,I2=255,M2=255 13312 MCO:SLP:TPD 13314 MCO:SLP:WUP=-1 13318 MCO:SLP:MS=708,SMS=0,I1=1,M1=1,I2=255,M2=255 13322 MCO:SLP:TPD 13324 MCO:SLP:WUP=-1 13328 MCO:SLP:MS=698,SMS=0,I1=1,M1=1,I2=255,M2=255 13332 MCO:SLP:TPD 13336 MCO:SLP:WUP=-1 13338 MCO:SLP:MS=688,SMS=0,I1=1,M1=1,I2=255,M2=255 13344 MCO:SLP:TPD 13346 MCO:SLP:WUP=-1 13348 MCO:SLP:MS=678,SMS=0,I1=1,M1=1,I2=255,M2=255 13355 MCO:SLP:TPD 13357 MCO:SLP:WUP=-1 13359 MCO:SLP:MS=667,SMS=0,I1=1,M1=1,I2=255,M2=255 13365 MCO:SLP:TPD 13367 MCO:SLP:WUP=-1 13371 MCO:SLP:MS=655,SMS=0,I1=1,M1=1,I2=255,M2=255 13375 MCO:SLP:TPD 13377 MCO:SLP:WUP=-1 13381 MCO:SLP:MS=645,SMS=0,I1=1,M1=1,I2=255,M2=255 13385 MCO:SLP:TPD 13389 MCO:SLP:WUP=-1 13391 MCO:SLP:MS=635,SMS=0,I1=1,M1=1,I2=255,M2=255 13398 MCO:SLP:TPD 13400 MCO:SLP:WUP=-1 13402 MCO:SLP:MS=624,SMS=0,I1=1,M1=1,I2=255,M2=255 13408 MCO:SLP:TPD 13410 MCO:SLP:WUP=-1 13412 MCO:SLP:MS=614,SMS=0,I1=1,M1=1,I2=255,M2=255 13418 MCO:SLP:TPD 13420 MCO:SLP:WUP=-1 13424 MCO:SLP:MS=602,SMS=0,I1=1,M1=1,I2=255,M2=255 13428 MCO:SLP:TPD 13430 MCO:SLP:WUP=-1 13434 MCO:SLP:MS=592,SMS=0,I1=1,M1=1,I2=255,M2=255 13438 MCO:SLP:TPD 13441 MCO:SLP:WUP=-1 13445 MCO:SLP:MS=581,SMS=0,I1=1,M1=1,I2=255,M2=255 13451 MCO:SLP:TPD 13453 MCO:SLP:WUP=-1 13455 MCO:SLP:MS=571,SMS=0,I1=1,M1=1,I2=255,M2=255 13461 MCO:SLP:TPD 13463 MCO:SLP:WUP=-1 13465 MCO:SLP:MS=561,SMS=0,I1=1,M1=1,I2=255,M2=255 13471 MCO:SLP:TPD 13473 MCO:SLP:WUP=-1 13475 MCO:SLP:MS=551,SMS=0,I1=1,M1=1,I2=255,M2=255 13481 MCO:SLP:TPD 13484 MCO:SLP:WUP=-1 13488 MCO:SLP:MS=538,SMS=0,I1=1,M1=1,I2=255,M2=255 13492 MCO:SLP:TPD 13494 MCO:SLP:WUP=-1 13498 MCO:SLP:MS=528,SMS=0,I1=1,M1=1,I2=255,M2=255 13504 MCO:SLP:TPD 13506 MCO:SLP:WUP=-1 13508 MCO:SLP:MS=518,SMS=0,I1=1,M1=1,I2=255,M2=255 13514 MCO:SLP:TPD 13516 MCO:SLP:WUP=-1 13518 MCO:SLP:MS=508,SMS=0,I1=1,M1=1,I2=255,M2=255 13524 MCO:SLP:TPD 13527 MCO:SLP:WUP=-1 13529 MCO:SLP:MS=497,SMS=0,I1=1,M1=1,I2=255,M2=255 13535 MCO:SLP:TPD 13537 MCO:SLP:WUP=-1 13541 MCO:SLP:MS=485,SMS=0,I1=1,M1=1,I2=255,M2=255 13545 MCO:SLP:TPD 13547 MCO:SLP:WUP=-1 13551 MCO:SLP:MS=475,SMS=0,I1=1,M1=1,I2=255,M2=255 13555 MCO:SLP:TPD 13559 MCO:SLP:WUP=-1 13561 MCO:SLP:MS=465,SMS=0,I1=1,M1=1,I2=255,M2=255 13568 MCO:SLP:TPD 13570 MCO:SLP:WUP=-1 13572 MCO:SLP:MS=454,SMS=0,I1=1,M1=1,I2=255,M2=255 13578 MCO:SLP:TPD 13580 MCO:SLP:WUP=-1 13582 MCO:SLP:MS=444,SMS=0,I1=1,M1=1,I2=255,M2=255 13588 MCO:SLP:TPD 13590 MCO:SLP:WUP=-1 13594 MCO:SLP:MS=432,SMS=0,I1=1,M1=1,I2=255,M2=255 13598 MCO:SLP:TPD 13600 MCO:SLP:WUP=-1 13604 MCO:SLP:MS=422,SMS=0,I1=1,M1=1,I2=255,M2=255 13608 MCO:SLP:TPD 13613 MCO:SLP:WUP=-1 13615 MCO:SLP:MS=411,SMS=0,I1=1,M1=1,I2=255,M2=255 13621 MCO:SLP:TPD 13623 MCO:SLP:WUP=-1 13625 MCO:SLP:MS=401,SMS=0,I1=1,M1=1,I2=255,M2=255 13631 MCO:SLP:TPD 13633 MCO:SLP:WUP=-1 13635 MCO:SLP:MS=391,SMS=0,I1=1,M1=1,I2=255,M2=255 13641 MCO:SLP:TPD 13643 MCO:SLP:WUP=-1 13647 MCO:SLP:MS=379,SMS=0,I1=1,M1=1,I2=255,M2=255 13651 MCO:SLP:TPD 13654 MCO:SLP:WUP=-1 13658 MCO:SLP:MS=368,SMS=0,I1=1,M1=1,I2=255,M2=255 13662 MCO:SLP:TPD 13664 MCO:SLP:WUP=-1 13668 MCO:SLP:MS=358,SMS=0,I1=1,M1=1,I2=255,M2=255 13674 MCO:SLP:TPD 13676 MCO:SLP:WUP=-1 13678 MCO:SLP:MS=348,SMS=0,I1=1,M1=1,I2=255,M2=255 13684 MCO:SLP:TPD 13686 MCO:SLP:WUP=-1 13688 MCO:SLP:MS=338,SMS=0,I1=1,M1=1,I2=255,M2=255 13694 MCO:SLP:TPD 13697 MCO:SLP:WUP=-1 13699 MCO:SLP:MS=327,SMS=0,I1=1,M1=1,I2=255,M2=255 13705 MCO:SLP:TPD 13707 MCO:SLP:WUP=-1 13711 MCO:SLP:MS=315,SMS=0,I1=1,M1=1,I2=255,M2=255 13715 MCO:SLP:TPD 13717 MCO:SLP:WUP=-1 13721 MCO:SLP:MS=305,SMS=0,I1=1,M1=1,I2=255,M2=255 13727 MCO:SLP:TPD 13729 MCO:SLP:WUP=-1 13731 MCO:SLP:MS=295,SMS=0,I1=1,M1=1,I2=255,M2=255 13737 MCO:SLP:TPD 13740 MCO:SLP:WUP=-1 13742 MCO:SLP:MS=284,SMS=0,I1=1,M1=1,I2=255,M2=255 13748 MCO:SLP:TPD 13750 MCO:SLP:WUP=-1 13752 MCO:SLP:MS=274,SMS=0,I1=1,M1=1,I2=255,M2=255 13758 MCO:SLP:TPD 13760 MCO:SLP:WUP=-1 13764 MCO:SLP:MS=262,SMS=0,I1=1,M1=1,I2=255,M2=255 13768 MCO:SLP:TPD 13770 MCO:SLP:WUP=-1 13774 MCO:SLP:MS=252,SMS=0,I1=1,M1=1,I2=255,M2=255 13778 MCO:SLP:TPD 13783 MCO:SLP:WUP=-1 13785 MCO:SLP:MS=241,SMS=0,I1=1,M1=1,I2=255,M2=255 13791 MCO:SLP:TPD 13793 MCO:SLP:WUP=-1 13795 MCO:SLP:MS=231,SMS=0,I1=1,M1=1,I2=255,M2=255 13801 MCO:SLP:TPD 13803 MCO:SLP:WUP=-1 13805 MCO:SLP:MS=221,SMS=0,I1=1,M1=1,I2=255,M2=255 13811 MCO:SLP:TPD 13813 MCO:SLP:WUP=-1 13817 MCO:SLP:MS=209,SMS=0,I1=1,M1=1,I2=255,M2=255 13821 MCO:SLP:TPD 13824 MCO:SLP:WUP=-1 13828 MCO:SLP:MS=198,SMS=0,I1=1,M1=1,I2=255,M2=255 13832 MCO:SLP:TPD 13836 MCO:SLP:WUP=-1 13838 MCO:SLP:MS=188,SMS=0,I1=1,M1=1,I2=255,M2=255 13844 MCO:SLP:TPD 13846 MCO:SLP:WUP=-1 13848 MCO:SLP:MS=178,SMS=0,I1=1,M1=1,I2=255,M2=255 13854 MCO:SLP:TPD 13856 MCO:SLP:WUP=-1 13858 MCO:SLP:MS=168,SMS=0,I1=1,M1=1,I2=255,M2=255 13864 MCO:SLP:TPD 13867 MCO:SLP:WUP=-1 13869 MCO:SLP:MS=157,SMS=0,I1=1,M1=1,I2=255,M2=255 13875 MCO:SLP:TPD 13877 MCO:SLP:WUP=-1 13881 MCO:SLP:MS=145,SMS=0,I1=1,M1=1,I2=255,M2=255 13885 MCO:SLP:TPD 13887 MCO:SLP:WUP=-1 13891 MCO:SLP:MS=135,SMS=0,I1=1,M1=1,I2=255,M2=255 13895 MCO:SLP:TPD 13899 MCO:SLP:WUP=-1 13901 MCO:SLP:MS=125,SMS=0,I1=1,M1=1,I2=255,M2=255 13907 MCO:SLP:TPD 13910 MCO:SLP:WUP=-1 13912 MCO:SLP:MS=114,SMS=0,I1=1,M1=1,I2=255,M2=255 13918 MCO:SLP:TPD 13920 MCO:SLP:WUP=-1 13922 MCO:SLP:MS=104,SMS=0,I1=1,M1=1,I2=255,M2=255 13928 MCO:SLP:TPD 13930 MCO:SLP:WUP=-1 13932 MCO:SLP:MS=94,SMS=0,I1=1,M1=1,I2=255,M2=255 13938 MCO:SLP:TPD 13940 MCO:SLP:WUP=-1 13944 MCO:SLP:MS=82,SMS=0,I1=1,M1=1,I2=255,M2=255 13948 MCO:SLP:TPD 13950 MCO:SLP:WUP=-1 13955 MCO:SLP:MS=71,SMS=0,I1=1,M1=1,I2=255,M2=255 13959 MCO:SLP:TPD 13961 MCO:SLP:WUP=-1 13965 MCO:SLP:MS=61,SMS=0,I1=1,M1=1,I2=255,M2=255 13969 MCO:SLP:TPD 13971 MCO:SLP:WUP=-1 13975 MCO:SLP:MS=51,SMS=0,I1=1,M1=1,I2=255,M2=255 13979 MCO:SLP:TPD 13983 MCO:SLP:WUP=-1 13985 MCO:SLP:MS=41,SMS=0,I1=1,M1=1,I2=255,M2=255 13991 MCO:SLP:TPD 13993 MCO:SLP:WUP=-1 13996 MCO:SLP:MS=30,SMS=0,I1=1,M1=1,I2=255,M2=255 14002 MCO:SLP:TPD 14004 MCO:SLP:WUP=-1 14006 MCO:SLP:MS=20,SMS=0,I1=1,M1=1,I2=255,M2=255 14012 MCO:SLP:TPD 14014 MCO:SLP:WUP=-1 14016 MCO:SLP:MS=10,SMS=0,I1=1,M1=1,I2=255,M2=255 14022 MCO:SLP:TPD 14024 MCO:SLP:WUP=-1 14026 MCO:SLP:MS=0,SMS=0,I1=1,M1=1,I2=255,M2=255 14032 MCO:SLP:TPDI'm sorry for asking for help again @core_c but I have no idea what I'm doing wrong....
-
@core_c correction, after I typed and posted this, the serial log started again and it did send the message, this is weird
14026 MCO:SLP:MS=0,SMS=0,I1=1,M1=1,I2=255,M2=255 14032 MCO:SLP:TPD 14034 MCO:SLP:WUP=1 14047 TSF:MSG:SEND,11-11-0-0,s=7,c=1,t=38,pt=7,l=5,sg=0,ft=0,st=OK:0.85 14055 MCO:SLP:MS=3000,SMS=0,I1=1,M1=1,I2=255,M2=255 14059 MCO:SLP:TPD 14061 MCO:SLP:WUP=-1 14065 MCO:SLP:MS=2990,SMS=0,I1=1,M1=1,I2=255,M2=255 14071 MCO:SLP:TPD 14073 MCO:SLP:WUP=-1 14075 MCO:SLP:MS=2980,SMS=0,I1=1,M1=1,I2=255,M2=255 14082 MCO:SLP:TPD 14084 MCO:SLP:WUP=-1 14086 MCO:SLP:MS=2969,SMS=0,I1=1,M1=1,I2=255,M2=255 14092 MCO:SLP:TPD 14094 MCO:SLP:WUP=-1 14098 MCO:SLP:MS=2957,SMS=0,I1=1,M1=1,I2=255,M2=255 14102 MCO:SLP:TPD 14104 MCO:SLP:WUP=-1 14108 MCO:SLP:MS=2947,SMS=0,I1=1,M1=1,I2=255,M2=255 14114 MCO:SLP:TPD 14116 MCO:SLP:WUP=-1 14118 MCO:SLP:MS=2937,SMS=0,I1=1,M1=1,I2=255,M2=255 14125 MCO:SLP:TPD 14127 MCO:SLP:WUP=-1 14129 MCO:SLP:MS=2926,SMS=0,I1=1,M1=1,I2=255,M2=255 14135 MCO:SLP:TPD 14137 MCO:SLP:WUP=-1 14141 MCO:SLP:MS=2914,SMS=0,I1=1,M1=1,I2=255,M2=255 14145 MCO:SLP:TPD 14147 MCO:SLP:WUP=-1 14151 MCO:SLP:MS=2904,SMS=0,I1=1,M1=1,I2=255,M2=255 14157 MCO:SLP:TPD 14159 MCO:SLP:WUP=-1 14161 MCO:SLP:MS=2894,SMS=0,I1=1,M1=1,I2=255,M2=255 14168 MCO:SLP:TPD
