What did you build today (Pictures) ?

[dakipro]

Installed z-wave roller blinds (discussed on this topic) from Swedish company m.nu .

If all is great, I will order three more motors (and two knobs/switches) for living room and terrace doors (which should also automatically keep the shades open if doors er open, to prevent damage).

Made a basic node-red flow that uses xiaomi lux sensor to get them down, but ultimate goal is to have them understand when the light is very bright and when it is "cozy", perhaps even knowing to get the blinds just low enough. Found one good explanation on the internet, will check it out (perhaps use multiple lux sensors strategically placed around the room to determine sun position and strength). Any tips and tricks?

(gif of the action, cannot upload gif to the forum https://media.giphy.com/media/5aY6vSwVn1hsdYC6nd/giphy.gif )

[Nca78]

I printed a small box and put my first "22" board in action on my entrance door. So far so good it's reporting the status reliably, and looking really tiny. A big difference with my first sensor 2 years ago in a big generic project box.
Just need to clean the glue left from previous sensor now :)

[dakipro]

@nca78 said in What did you build today (Pictures) ?:

"22" board
Looks great, can we get more info about it/link?

[mfalkvidd]

I've continued my quest to get all MySensors defines documented, by creating some pull requests
https://github.com/mysensors/MySensors/pull/1111
https://github.com/mysensors/MySensors/pull/1108
https://github.com/mysensors/MySensors/pull/1106
https://github.com/mysensors/MySensors/pull/1105

The only keywords left new are ones that I don't understand good enough to document. These are tracked in
https://github.com/mysensors/MySensors/issues/1107 and https://github.com/mysensors/MySensors/issues/1090

[mfalkvidd]

I also added buy links for a shielded PA+LNA module and a more reliable source for regular nrf24l01+, on request by @gohan who managed to dig up good Aliexpress buying sources. Thanks gohan!
The buying links are available at https://www.mysensors.org/build/connect_radio and https://www.mysensors.org/store/radio

[Nca78]

@dakipro said in What did you build today (Pictures) ?:

Looks great, can we get more info about it/link?

Not really, I posted about it long ago here (https://forum.mysensors.org/topic/7836/what-did-you-build-today-pictures/136) It's just made for me to play by making a sensor as small as possible, but it's pretty hard to solder and with CR1632 and nrf22 the battery life won't be that good (around 1 year) so I don't think I'll publish it.

[sundberg84]

These arrived today...
New gateway and nodes with signing is first on my list.

[Thucar]

Built half of my dutch bucket system. Namely the drain part. Irrigation to follow.

[dbemowsk]

Working on setting up a new work bench in my back room in my basement where my HA equipment rack is. I wanted to build a case for my serial nRF24L01-PA-LNA gateway built on a rev8 Easy Newbie board. I just had the board sitting on a shelf on my rack, and now I want to mount it on my MDF board with all of my other equipment. Here is the design that I came up with for the case.

This is the inside bottom of the case:

And here is inside the top of the case:

It has a spot for 3 - 5mm LEDs for the transmit, receive and error lights. There is a hole on the right side of the case for the PA-LNA antenna connector. The oval hole on the lower right side of the case is for the DC in jack. I had one of these in my parts bin:

The hole on the bottom right is for the FTDI adapter connection. I am using one of these adapters that has a mini-USB connector:

I have the case running on the printer now. I will post pics when it is done.

[Yveaux]

@dbemowsk very impressed by your openscad designs, as always :+1:

[dbemowsk]

For anyone interested, here is an OpenSCAD rendering of the MySensors logo:

I tried posting the OpenScad code for this, but it is too long to add to a normal post. So here is a link to the OpenSCAD file.
MySensors_logo.scad

Special thanks to @hek for giving me the .svg file that allowed me to create this. I would be curious to see peoples uses for this.

[dbemowsk]

So I tried printing the cover for this with my original design using Cura as my slicer, and I couldn't get the logo to print right, plus the text under the LEDs was a bit too small. I then modified the design a bit and made the logo and text a bit bigger. I again tried printing it using Cura, but the logo still was missing some lines in the body. I then thought that part of the problem was the slicer I was using, so I tried it using Slic3r and I have to say, the logo came out MUCH better.

I ended up losing the Y in "My" Sensors and the ending "t" in "Transmit", but I am going to use the case the way I currently have it. Now I just have to assemble the new gateway. I am planning on making a whole new gateway and trying out the new 2.2.0 library. Hopefully my older 2.0.0 nodes will not have any issues with it, but that is why I plan on keeping my pro mini from my 2.0.0 gateway so I can revert back to that if I have to.

[dakipro]

Built case for soldering tools, to easily move them out of the way.

Not really, bought it on banggood and asked wife to assemble it (she likes those type of projects, especially if the office might look a tiny bit cleaner) https://www.banggood.com/DIY-Self-assemble-RC-Model-Tools-Case-Screwdriver-Box-Gripper-Package-Plier-Stand-Retro-Style-p-1257252.html?cur_warehouse=CN

Laser cut plywood(or something), looks quite nice I think. I will order few more when they appear in stock.

[GertSanders]

So here is my contribution to this tread: a differential drive "brain". A work in progress:

[dbemowsk]

Finally finished my 2.2.0 gateway and have it mounted in the new enclosure. It appears to be talking to my 2.0.0 sensors just fine.!

[sundberg84]

Another motion and led strip node.

[sundberg84]

...and deployed.

[hek]

@sundberg84

Nice, maybe add a diffuser? I've found that greaseproof paper (smörpapper in Swedish) works pretty well.

[NeverDie]

@gertsanders what is that?

[nagelc]

@sundberg84 Nice. I was wondering if I had an use for these. Now I want them everywhere!