Hello,
Any one use CY8CMBR3002 IC in Touch Switch??
Posts made by jemish
- 
    RE: 💬 Battery powered glass touch switchposted in OpenHardware.io
- 
    Smart Water Level Detectorposted in General DiscussionAny one make smart water level Detector in our home water tank? 
- 
    RE: 6 Way wall touch switchposted in My ProjectHello sir, have any update? 
 we are waiting for your new updates.
 Thank you
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx Where is the button/ Switch connection pin. 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in HardwareI waiting for new version of two relay switch board. 
- 
    RE: Curtain Control Nodeposted in OpenHardware.ioHi Suresh, 
 where we can by this type of curtain material. I want to use in my home.
- 
    RE: AC light dimmer with 2x TRIACposted in My Project@Oitzu okk my friend, thank you so much. But is there any design available for controlling inductive load??? 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx 
 what is your progress for new version of two relay switch board?
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardwareyes , I also thinking to use more than one relay. 
- 
    RE: 💬 Very narrow and minimal switch nodeposted in OpenHardware.ioplease write detail of how to use and what is actually function of this device. 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardwareyes, now how to use ESP8266 instead of arduino for the same function that we are discuss in this topics. 
- 
    RE: Controlling speed of an AC 230v FAN. Help Needed[RESOLVED]posted in HardwareWhich hardware s used for controlling a FAN? 
- 
    Front Door Lock With mysensoreposted in HardwareHi all, I'm thinking about buying a Smart Lock for my house so I can open the door without reaching for my keys (very handy if you have a hand full of groceries). There are several different models but I was wondering which one is best suited for use with Domoticz (or even if it makes sense). 
- 
    RE: Project boxes for MySensor's nodes and gateway?posted in Enclosures / 3D Printing@Dalhoj This is realy good module, where can I buy this module. 
- 
    RE: OpenHab with smart door lockposted in DevelopmentI required door lock that can work with mysensore 
- 
    RE: SmartThings comes out. How about a MySensors integration ?posted in Controllersi am interested in this box. 
 But, I don't know about how to fix it.
- 
    RE: AC Dimmer with OpenHabposted in OpenHABCan we control AC ceiling fan using openhab dimmer. 
 I get circuit schematic for AC fan dimmer. 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx so, now what is the progress....we are waiting your response..... 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx can you make design for 2- relay board.... 
- 
    RE: Roller Shutterposted in Hardwarecan you please tell me that what type of roller shutter are use.... 
 where I can buy this roller shutter.
- 
    RE: PCB Boards for MySensorsposted in Hardwareany PCB available for fan control using dimmer with rotarry switch? I just know only circuit diagram. but I don't try that.  
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardwarebut, you said that you want to change something like 45 degree or 90 degree, so that .... 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx please upload new design new that you make now. 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx so now, what is the progress?? 
 we will wait for your response.
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardwareyes I like to wait for your responce. 
 please reply fast as possible.
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx If I want to buy this module then......... 
 If you sell this module then I am ready to buy ...
- 
    RE: OpenHab with smart door lockposted in DevelopmentI seen this type of electric door lock, but I looking for lock will control through openhab mysensore as well as lock mechanical key also. 
- 
    OpenHab with smart door lockposted in DevelopmentHave any one tried to OPEN and CLOSE the door using openhab. 
 I want to make smart door lock and setup in at my home.
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx when you completed the design of PCM board than please share with me as soon as possible. 
- 
    RE: Safe In-Wall AC to DC Transformers??posted in Hardware@petewill when you start home automation at that time please share photos wit me. 
 how to setup the no. of relay, power supply, arduino, radio etc in WALL box.
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx please make this type of board, so that we can control two thing through one module 
- 
    RE: 110v-230v AC to Mysensors PCB boardposted in Hardware@aproxx here you use only Relay not a relay with button. 
 my suggestion is that make design to use relay with button Here I sketch 2-Relay and 2- switch 
- 
    RE: How to control OPENHAB using internet?posted in Hardwareif I logout the my.openhab.org account and stop openhab on raspberry pi then also open the UI application. what is the reason behind that? 
- 
    RE: How to control OPENHAB using internet?posted in Hardwareany one know step of this setup of OPENHAB is control through INTERNET. 
 (I think that my.openhab.org through control will done, but I don't know how)
- 
    How to control OPENHAB using internet?posted in HardwareI want control openhab using internet not a local connection. If I am in trip and I want ON/OFF the device at HOME then how can I control it using openhab? 
- 
    RE: Safe In-Wall AC to DC Transformers??posted in Hardware@Yveaux thank you for your reply.... 
 You mean that I can put this RECOM inside the wall box...behind the switch board.
- 
    RE: Safe In-Wall AC to DC Transformers??posted in Hardware@Yveaux this RECOM AC to DC converter will safe or not for put it to in the wall. because I have to start live HOME Automation. 
- 
    RE: My Relay Moduleposted in My Projectif we put this box in wall then power supply will safe or not? 5v power supply adapter's temperature will afact or not? 
- 
    RE: Safe In-Wall AC to DC Transformers??posted in Hardwareso finally....plz...tell me which power supply is the best to put inside in the wall? I want required 5v for Relay, arduino mini, and radio. 
- 
    RE: Dimmable LED Actuator ver 1.4.1posted in Bug Reportsin openhab , dimmer switch change only two state 0 and 100. 
 I didn't get change in between 0 to 100.please help me in openhab rule file for change. my rule file is when 
 Item Fan_Hall_reg received commandthen var Number percent = 0 if(Fan_Hall_reg.state instanceof DecimalType) percent = Fan_Hall_reg.state as DecimalType if(receivedCommand==INCREASE) percent = percent + 5 if(receivedCommand==DECREASE) percent = percent - 5 if(percent<0) percent = 0 if(percent>100) percent = 100 postUpdate(Fan_Hall_reg, percent); sendCommand (Arduino , "Fan_Hall_reg=" + percent)in this rule I get only two state not in between that. 
- 
    RE: Rotary dimmer switch and mysensors?posted in HardwareI want to control ceiling fan using Rottery dimmer switch using arduino. 
 How can i use?
- 
    RE: Array Relay Button Actuatorposted in General Discussionyes , I have same problem. how can we use simple wall switch with relay to ON and OFF the lights. 
- 
    RE: Controlling existing relaysposted in Hardwarehow can I control fan speed using light dimmer sketch in openhab? 
- 
    RE: Serial Gateway connection to Openhabposted in OpenHABHay, can any one try that.........feedback from switchboard 
- 
    RE: Serial Gateway connection to Openhabposted in OpenHABhi, 
 I have a question, that how can I get feedback from our switchboard that is at our wall.If I am on the light by pressing the switch at switchboard. If in case I get the 5v from switchboard and give it to the Arduino, than how can I update state of switch in openhab. 
- 
    RE: Serial Gateway connection to Openhabposted in OpenHABHey.....please can anyone reply me?......please...... 
- 
    RE: Serial Gateway connection to Openhabposted in OpenHABAt this link: http://www.mysensors.org/build/serial_gateway I got the arduino sketch, 
 but I want to know, this sketch is for main arduino that is connected to the raspberry pi via serial communication and other side it is connected to the nRF24L01.If it is true than, I want to know which code is required at node side where I can ON or OFF LED and LIGHTS or DIMMER. 
- 
    RE: Serial Gateway connection to Openhabposted in OpenHABCan I get the Arduino uno code for this openhab serial binding? 
 I want a like to see that how it will work.