@timropp :blush:

@timropp my philosophy is that Home Automation should be just home automation. All other add-on's need their own solution. A raspberry Pi (I use a 2) with a Razberry and Domoticz will do. Move over the other logic to the WHS and use MQtt to connect them. But that's the way I see things.

Found a non-blocking library for LED fading so I created 2 new modes. One that randomly fades the colors and one with a pulsating effect for Red color. See the codebender sketch from previous post. What else can we do with a RGB node?

Solved! It was a hardware problem - I didn't put caps on the radio on the gateway or RGB node originally. I added them and the node added perfectly. I guess I got lucky originally that even the 2 devices appeared on the first try.

What is the actual solution to this problem? I have the same problem (mysensors v2 (dev)) and domoticz. I have 2 RBG-3D nodes, the first one is showing all dimmers and works perfect, but when i added the second one i only get "Present Blue" and the "show" button. Under the mysensors hardware in domoticz the second RGB node display "Name: unknown, Sketch name: Unknown". [image: 1462194787019-mysensors.png]