Arduino Pro mini + RF 433 MHz as Gateway
-
Hi All,
I wish to use Arduino Pro mini + 433 MHz Emitter + Receiver as a Gateway to communicate with Domoticz. The Nodes I wish to use are Arduino Pro mini + 433 Emit+Recv, the same as Gateway but with different software of course.
I read on MySensors website that Gateway should be Arduino Nano + 2.4 GHz radio module but I would like to know if I can easily do it with Pro mini + 433 MHz radio.
Can anyone told me if it's possible and help me to do it ?
Many thanks in advance. -
Hi All,
I wish to use Arduino Pro mini + 433 MHz Emitter + Receiver as a Gateway to communicate with Domoticz. The Nodes I wish to use are Arduino Pro mini + 433 Emit+Recv, the same as Gateway but with different software of course.
I read on MySensors website that Gateway should be Arduino Nano + 2.4 GHz radio module but I would like to know if I can easily do it with Pro mini + 433 MHz radio.
Can anyone told me if it's possible and help me to do it ?
Many thanks in advance.The MySensors Libraries were designed around the nrf24l01 transceivers which have much more built in capability than a simple 433Mhz Tx/Rx pair. You can make a node which contains a nrf and 433 Rx/Tx and it can transfer messages between the MySensors architecture and common 433Mhz devices. If you are only interested in 433Mhz devices with Domoticz, see the RFLink project for more info. I believe it requires a mega to fit their libraries.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login