How to solder FTDI Platinum so out voltage is 3.3
-
Made a mistake and order this FTDI
http://www.aliexpress.com/item/FTDI-Platinum-V2-1-FTDI-Basic-Breakout-5V-3-3V/847242235.html
Been trying to figure out how to solder it to deliver 3.3v and not 5. Anyone know how to do it?Thx
//Håkan
-
move the 0 ohm resistor to 3v3 position, instead of 5v (it's the resistor between the white area, and the bigger yellow capacitor on the board)
-
@tbowmo Thx, not easy
