Multimeter recommendation?
-
The safety aspect is mentioned in the videos I linked and in several of the threads. Yes, it is important if the multimeter will be used for measuring household mains. I don't plan on measuring anything above 24V, and most often 5V and lower so I am not that concerned.
-
In some sense I guess there's a dilemma that you'll need a better tool the less you know.
Btw, I'm now a proud owner of the super cheap ut33a. At 10A socket it says "Unfused". FYI I've plugged that socket. Useless and dangerous.
-
Late to the party...., but I absolutely love Fluke. I have several and they are build very well.
-
I have to agree... I think you'll need at least one Fluke.:yellow_heart:
-
Temped by EEVblog BM235 Multimeter especially given it comes with some nice silicone leads.
https://www.eevblog.com/product/bm235-multimeter/
The flukes are very nice though!
-
I'm looking for a one that's a bit cheaper. And so a voltcraft VC 130-1. Is that a decent multi meter for a hobbyist?
-
This post is deleted!
-
Anyone reading this post, and thinking of buying Multimeter , I recommend buying a like this one,.
Because you cannot measure AC current using that traditional multimeter like this one.
Accuracy of clamp is greater than the traditional one, you can also detect the flux or EMF using clamp meter. It will be very usefull in detecting live wires with current and in the projects related to coils as it can detect EMF. -
Anyone reading this post, and thinking of buying Multimeter , I recommend buying a like this one,.
Because you cannot measure AC current using that traditional multimeter like this one.
Accuracy of clamp is greater than the traditional one, you can also detect the flux or EMF using clamp meter. It will be very usefull in detecting live wires with current and in the projects related to coils as it can detect EMF.@marchen how good is that to measure currents below 10uA ? :D
-
I have a completely automatic one, and I love it. It doesn't have a dial you have to turn to determine sensitivity.
All it basically has is an on button and two leads.
This gives me much more assurance that I won't fry the multimeter, so I use it a lot more.
-
OK, my best recommendation is Brymen BM869 (with logging) or there is a model without logging.
I have also supported a kickstarter project for a new Dave's multimeter EEVblog 121GW - https://www.kickstarter.com/projects/eevblog/eevblog-121gw-multimeter
There is another model EEVblog BM235 which I can highly recommend.
I have changed my mind about Vichy VC99 multimeter. Mine failed after a year and the build quality is just poor - you would not want to test even 240V with it. However, it has been very accurate in the beginning and extremely cheap.
-
@nca78 for such a low current the best bet would be EEVblog's uCurrent
https://www.adafruit.com/product/882@alexsh1 yes and no. I measure at 3.3V then run my low power nodes on a button cell so below 3V voltage, so I measure current a bit higher than the real one when node is on battery and I'm sure the battery life I calculate will be met. I don't need an ultra precise measurement I just need to know if I'm in the expected range or if something is wrong.
