RPI Gateway - !TSM:INIT:TSP FAIL

[gohan]

@hek do you think it is a compiler issue or a bug?

[mfalkvidd]

@maxdor looks like the same problem as reported in https://github.com/mysensors/MySensors/issues/955
Add --extra-cxxflags="-D__STDC_FORMAT_MACROS" to the configure command

[tchoblond59]

@mfalkvidd I have the same issue. Even with --extra-cxxflags="-D__STDC_FORMAT_MACROS".

[mfalkvidd]

@tchoblond59 could you post the full configure command you used and info on what system you are trying to build on?
gcc -v |& grep 'gcc version'
grep PRETTY_NAME /etc/os-release

[tchoblond59]

@mfalkvidd
./configure --my-transport=nrf24 --my-gateway=mqtt --my-controller-ip-address=127.0.0.1 --my-mqtt-publish-topic-prefix=mysensors-out --my-mqtt-subscribe-topic-prefix=mysensors-in --my-mqtt-client-id=mygateway1 --extra-cxxflags="-D__STDC_FORMAT_MACROS"

gcc version 6.3.0 20170516 (Raspbian 6.3.0-18+rpi1)
PRETTY_NAME="Raspbian GNU/Linux 9 (stretch)"

[gohan]

Do you get same error even if you compile as ethernet gateway?

[tchoblond59]

make clean
./configure --my-gateway=ethernet --my-port=5003
make

Same error after this.

[mfalkvidd]

@tchoblond59 thanks. So far, it seems your system that is unable to compile is the same as the system I was able to compile cleanly on. I wonder were the difference is.

[tchoblond59]

I open an issue on github
https://github.com/mysensors/MySensors/issues/980

Hope i will be able to fix it. I will try to reinstall a raspbian when i have some times

Thanks for the help

[tchoblond59]

For the moment i am able to compile by going to previous commit
git checkout 9e5a1e32
make

(I haven't test with a nrf24 but i can launch mysgw )

[Inso]

I chave the exact same issue. Made the installation of Raspi and MySensors quite often last days because of problems with the NRF24. Now, as it finally worked, the installation of my clean final version crashes -.-.

[mickecarlsson]

Same error here.
gcc version 4.9.2 (Raspbian 4.9.2-10)
PRETTY_NAME="Raspbian GNU/Linux 8 (jessie)"
Replacing

printf("bcm2835_delayMicroseconds %" PRIu64 "\n", micros);

with

printf("bcm2835_delayMicroseconds %lld\n", micros);

in file drivers/BCM/bcm2835.c fixed the issue.

EDIT:
It did compile, but it segfaults when I try to start mysgw
Time to get a fresh copy from git

EDIT2:
Fix from commit in bug report fixed it.