Issues since upgrading to v1.4.1
-
Hi,
I've a lot of nodes built with V1.4. All are running fine.
I downloaded V1.4.1 but since some of them seem hanged. . I get only "node started" but nothing else.
No error message.
I've restored V1.4 and all run fine now.Any Idea ?
Thanks.
-
Only a bugfix (which was pretty serious) between 1.4.0 and 1.4.1. Communication should improve between them. Did you also update gateway when testing?
-
Yes, I did the gateway upgrade to V1.4.1 . I'm using Mqtt Gwy.
i've tried also to used SofSpi but get the same problem as mentionned in an another post (compil error in RF24.h) . I've let my Mqtt Gateway in V1.4.1 but not with softspi , using ports 11,12,13 instead of A0,A1,A2.
I've rollbacked all my nodes to V1.4.
So my config is now : Nodes V1.4 + Gateway V1.4.1 , all run fine.You say that V1.4.1 is only a BugFix release but , for example, SofSPI was not present in V1.4 but only in V1.4.1. Maybe other differences ?
-
You didn't mention that you were running Ethernet... Which ethernet module type?
I'm not running the MQTT gateway myself unfortunately.
Not sure if @Damme has done any tests with SoftSPI enabled but it shouldn't affect things if you keep it disabled (default).
-
@hek I can confirm what MQTT gateway working good (with some troubles, but none too seriously) on version 1.4.1 using SOFT_SPI and Wiznet W5100 module (common Ethernet shield).
-
MQQT Gateway works with V1.4.1, SoftSPI enabled in RF24_config.h and workaround mentionned (#define digitalio.h in main ino) but radio dialog with nodes in V1.4.1 fails (for Nodes , SoftSPI is not enabled). If i rollback nodes to V1.4 , it works!
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Compiling Sensor code using BME280 and ESP8266
Troubleshooting • 12 days ago • dpcons 11 days ago -
Some sensors permanently fail after one/two years
Troubleshooting • 25 Jul 2024, 17:17 • Kokosnoot 25 Jul 2024, 17:17 -
Can not compile MySensors on esp8266
Troubleshooting • 24 Aug 2024, 15:35 • TheoL 29 Aug 2024, 20:47 -
Echo request is not set
Troubleshooting • 12 Aug 2024, 15:36 • kamilb85 3 Sept 2024, 08:58