No, I define the number of pulses for 1m3. This data is theoretical and to be verified.
Adjusted to 300,000 pulses per m3 or 6,000 pulses per 20 liters, I obtain an actual volume of 15 liters. So I had for 6000 pulses a volume of 15 liters.
So if I had waited to have one m3, I would have had 1000 liters / 15 liters = 66.67 * 6000 pulses = 400,000 pulses per m3.
For your second sentence I agree and that is the problem.
Dear MaxG.
Thank you for your interest.
«I am missing units of measure in the graphs» - You are right. I didn't put the units of measurement in the graphs. I described the graphs in the beginning of every paragraph.
«Why is there a significant dip at 50?» - every sensor has its own transient response. Some pyroelectric detectors are faster, some not. Serial opposed dual pyroelectric detectors have transient responses longer than parallel. I found value 50s to be approximately good for all of the samples. Also, this value is comparable with the scale of percentage, so 100s, or 100%, is the length of the full period, and 50s, or 50%, if that of one of the two transient responses, heating or cooling respectively.
«Maybe overlaying the sensors in one graph per category would allow for a quick comparison of the response.» - every graph includes four lines. If I overlay all of them one another, I'm afraid, we will receive chaos. I think It would be a good idea to overlay the approximations only. What are you thinking?
«A summary/conclusion would also be helpful to the reader.» - You are right twice. But I didn“t do it for the next reasons.
This method is too young, the first attempt. I don't have enough knowledge, skills or practical experience do write conclusion. When a half of the year have passed by, I will, probably, be able to write good, professional conclusions.
As the author, I am also interested in the opinion/conclusions of the other people. This is why I have posted it here.
If you have more questions, please, feel free to ask. If you know the other people interesting in pyroelectric measurements, invite them to this discussion. This topic is brand new. I am looking for more feedbacks and opinions. I'll be glad to receive positive, but also accept critics. The truth is born in discussions.
Kind regards in return.
P.S. you can even think about carrying out the same measurements all by yourself. If you find a way how to test motion sensors to avoid false alarms, you will be able to earn something.
@skywatch You are referring to the snippet that combines sleep on timer with pin change interrupts?
I just pasted that code in two randomly picked MySensor example sketches (UVSensor and ClearEepromConfig) and it compiled just fine (MySensors 2.3.2 and IDE 1.8.13). What kind of error do you get?
Edit: If it complains about getSleepRemaining() not being declared, you may be using an older MySensors version. I think it has been added with 2.3.2
