Arduino X-10 Controller for Domoticz
-
I have a ton of old X-10 modules laying around that I would like to make use of. I have done some searching so if I overlooked a previous topic apologies.
What I am looking for is a way to setup an Arduino Uno with an X-10 Power line converter as a gateway from my Pi to control my X-10 outlets. If there is a better way to do this by simply buying a USB adapter for the Pi I am open to that as well. Any ideas or examples would be much appreciated. Thank you
-
I have a ton of old X-10 modules laying around that I would like to make use of. I have done some searching so if I overlooked a previous topic apologies.
What I am looking for is a way to setup an Arduino Uno with an X-10 Power line converter as a gateway from my Pi to control my X-10 outlets. If there is a better way to do this by simply buying a USB adapter for the Pi I am open to that as well. Any ideas or examples would be much appreciated. Thank you
@ewaldsreef I'm not that familiar with X10 but it looks to me that a solution like here on the Domoticz wiki is the way to go
-
@ewaldsreef I'm not that familiar with X10 but it looks to me that a solution like here on the Domoticz wiki is the way to go
@AWI Thanks. I think that will be the easiest. I wouldn't even mess with the x-10 anymore if I didn't already have all the outlets.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login