Did any one able to make this work with atmega328P-PU 28 DIP 8MHz internal clock? or is it just me having problems with this boot loader?
I was able to load the boot loader successfully and able to upload a sketch but then nothing happen, i see nothing in the serial port (default 115200) and the gateway does not find any node.
I am using latest dev branch of 2.0 and the boot loader from the above thread link.
Just for compression i loaded another boot loader for 8MHz internal clock (Arduino on breadboard) and uploaded a sketch to it and it worked perfectly communicating with the gateway etc.
I want to be able to upload OTA.
Am i doing something wrong? does this boot loader even supports this MCU?
@dpressle MYSBootlader dev (and troublehooting) is currently on hold until the release of MySensors 2.0.0. This is necessary since some adjustments to the OTA protocols have to be finalized.
Thanks, i will wait...
MLs last edited by
Something new about OTA and MySensors 2.1.1 with atmega328P-PU 28 DIP 8MHz internal clock?