💬 Secret Knock Sensor
-
This thread contains comments for the article "Secret Knock Sensor" posted on MySensors.org.
-
Need some help. I have wired everything up for this project however, when I connect my sound detection (mic) board, my speaker sounds then my relay turns on, sound, relay off....on and on. I tried changing the mic and button pins and checking for a bad ground but cant find anything.
-
Hmm. I connected a sound sensor to Arduino Mini Pro (with external power source), adjusted the sensitivity (so the LED only blinks when i knock on the mic), uploaded the example sketch. But the serial monitor shows me constantly knocks. Maybe 7 knocks per second. On and on....
I set the threshold value in the sketch to 10 and 100 and 200. But no change.
When i disconnect the sound sensors DO pin from Arduino. It's the same... constant knocks.What am i doing wrong?
P.S.: Digital 0 is what pin on the Arduino? Pin2?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login