Hi @GertSanders,
Do you happen to still have the Eagle project files from version 3 you created and shared on OSH Park? I'd like to add a set of pads for the mini smd version of the NRF24L01. If not, I'll just use the version 2 files from openhardware.io and try my best to recreate the changes you made between them.
Kind regards,
AH
Hello Guys ,
I am looking to run the rasp pi as gateway+controller with the nrf24 . Please where should i start from does it have any explanation like we have for the arduino s running mysensor ? .
UPDATE
I think it's a problem with the arduino board itself.
So since my previous posts I've tried multiple radios and I've got a 4 working nodes now:
Mega + NRF24
UNO R3 + NRF24
DCcEle (clone) + NRF24
Nano DCCduino (clone) + NRF24
Plus the Raspberry Pi 2 as gateway with NRF24L01+ PA/LNA is working.
So... it seems like it's a problem with that Uno board.... weird.
I've tried multiple radios (specifically ones that worked on the other boards) and none of them work. Like I said before, the board and the Rp2 seem to be communication but not properly.
Has anyone ran into a similar problem before?
