Ethernet Gateway Library
-
Hello everybody.
I'm work on ethernet gateway.
I used from meny library for run this but it gives errors.
Can you please run this code in your Arduino ide and if it work ,send me your libraries?
It's very important to me.
code EthernetGateway
-
Welcome to the forum @Rez
That code looks like it was made for MySensors 1.x, which quite old.
Try the latest version instead: https://www.mysensors.org/build/ethernet_gateway
-
Thank you Mr @mfalkvidd .
I found the library of this code but got the following error.
-
Mr @mfalkvidd
I want to recive data from this code:meter
how i get this data with your ethernet gateway code:GatewayW5100.ino
can you Please fill in (void setup) and (void presentation) and (void loop) according to the meter code? I thank you very much.
-
@Rez sorry, that sketch is way too complex for me to understand.
-
thanks Mr @mfalkvidd .
Suggested Topics
-
Is MQTT Necessary? or, Use Case for MQTT?
Controllers • 28 Mar 2016, 01:12 • TRS-80 9 Jan 2020, 09:01 -
Multiple virtual nodes on a gateway
Troubleshooting • 7 Feb 2019, 16:00 • pvoj 12 Feb 2019, 23:14 -
Communication problems between MQTT Gateway (OrangePi) and Node (Arduino Nano)
Troubleshooting • 1 May 2019, 19:22 • gammlerstyle 5 May 2019, 18:01 -
Just starting out have a question
General Discussion • 23 Feb 2015, 15:52 • Chaotic 27 Feb 2015, 15:04 -
Parallel Gateways
General Discussion • 29 May 2020, 11:12 • jocke4u 29 May 2020, 12:35 -
Step-by-step procedure to connect the NRF24L01+ to the GPIO pins and use the Raspberry as a Serial Gateway (MySensors 1.x)
Hardware • 22 Nov 2015, 20:40 • mfalkvidd 10 Oct 2017, 19:43 -
💬 USB RF Gateway
OpenHardware.io • 6 Sept 2019, 11:44 • openhardware.io 6 Feb 2020, 11:36 -
RFM69HW Raspberry Pi 2 Gateway
Troubleshooting • 2 Aug 2017, 12:39 • NickB149 2 Aug 2017, 14:30
