Is there any complete "how to guide"?

[sundberg84]

Never the gateway - this just pass along the msg to the controller.
If you do not set a static node id, the controller assign.

[magpern]

Yet again thanks @Dwalt.
I guess I'll have to wait for the Vera Edge to arrive. Can't make head or tail out of this.

I don't get anything useful out of MYSController. I have tried to read about it, but I can't find anything but the forum thread about it. Everybody seams to already have it running and have other problems (and talk about MYSBootloader alot)

MYSController connects to my gateway at 192.168.0.250:5003. It says
0;0;3;0;14;Gateway startup completed

when I power up my sensor, MYSController does some TX and RX (I also see thing happen in telnet client).
2015-10-14 22:05:23 TX 255;255;3;0;4;1
2015-10-14 22:05:23 RX 255;255;3;0;3;
But that's about it. Nothing more. Nodes does not update, routing table is the same
it just say this in the nodes list

0 - Gateway
Broadcast

[tekka]

@Magnus-Pernemark said:

2015-10-14 22:05:23 TX 255;255;3;0;4;1
2015-10-14 22:05:23 RX 255;255;3;0;3;

That looks already good. The node is asking for an ID, and the controller assigns ID 1 (not chronological in the log). What sketch are you running?

For further troubleshooting, please make sure "Logging" is enabled and upload the generated log file - that helps to understand what is going on.

[sundberg84]

@Magnus-Pernemark You can read about the serial api here: http://www.mysensors.org/download/serial_api_15
255 = Node does not have an id
3 = Internal
0 = No ack
...

damn... tecka was first :)

[tekka]

@sundberg84 sorry...lol :)

[magpern]

Hi @tekka. I just took a ESP8266 NodeMcu V0.9 and connected a NRF24L01+ radio to it. Uploaded sketch according to instructions found about this gateway.
Then I did the same thing with a Mini Pro, hooked up a NRF and uploaded the RelayActuator.
I didn't change any code, more then the LED pin on the gateway, SSID and password for WIFI.

Applyed power to gateway, started MYSController, applyed power to sensor.

And this is what I get

2015-10-14 22:30:13	STARTUP	Initialize message logging
2015-10-14 22:30:13	STARTUP	MYSController 0.1.2.282
2015-10-14 22:30:13	STARTUP	FPC 2.6.4 / Lazarus 1.4.2
2015-10-14 22:30:13	STARTUP	still under development :) tekka 2015
2015-10-14 22:30:13	STARTUP	Load INI file...
2015-10-14 22:30:13	STARTUP	INI version 0.1.2.282
2015-10-14 22:30:13	INFO	*** Logging START ***
2015-10-14 22:30:13	VERSION	MYSController 0.1.2.282
2015-10-14 22:30:13	STARTUP	INI file loaded
2015-10-14 22:30:13	STARTUP	Loading FW repository...
2015-10-14 22:30:13	REPO	FW "Blink" loaded. t=10, v=1, blocks=72, crc=0xD098
2015-10-14 22:30:13	REPO	FW "TimeReporter" loaded. t=20, v=1, blocks=840, crc=0x4AC5
2015-10-14 22:30:13	REPO	FW "Sensebender Micro" loaded. t=100, v=1, blocks=1344, crc=0x3482
2015-10-14 22:30:13	REPO	FW "Sensebender Blink" loaded. t=110, v=1, blocks=768, crc=0x1314
2015-10-14 22:30:13	REPO	FW repository loaded. Items=4
2015-10-14 22:30:13	STARTUP	Initialize message types
2015-10-14 22:30:13	NODE	New node discovered, node id=0
2015-10-14 22:30:13	NODE	New node discovered, node id=255
2015-10-14 22:30:17	INFO	Connected to 192.168.0.250:5003
2015-10-14 22:30:17	CHILD	New child discovered, node id=0, child id=0
2015-10-14 22:30:17	RX	0;0;3;0;14;Gateway startup complete.
2015-10-14 22:30:25	UPDATE	4295098650
2015-10-14 22:30:38	CHILD	New child discovered, node id=255, child id=internal
2015-10-14 22:30:38	TX	255;255;3;0;4;1
2015-10-14 22:30:38	RX	255;255;3;0;3;
2015-10-14 22:30:39	TX	255;255;3;0;4;1
2015-10-14 22:30:39	RX	255;255;3;0;3;
2015-10-14 22:30:41	TX	255;255;3;0;4;1
2015-10-14 22:30:42	RX	255;255;3;0;3;
2015-10-14 22:30:43	TX	255;255;3;0;4;1
2015-10-14 22:30:43	RX	255;255;3;0;3;

[tekka]

@Magnus-Pernemark looks like the node does not receive the ID reply - this has previously been observed: adding a larger capacitor or replacing the nRF often solved the issue.

[magpern]

Thanks @tekka that did it. I didn't have a capacitor on the gateway. I added a 4.7uF and now the sensor pops up in MYSController. (The capacitor recommendation was not in the ESP8266 setup, hense lack of one)

Thank you so much. One less thing to loose sleep over.

[tekka]

@Magnus-Pernemark :) have fun

[alfredocdmiranda]

@sundberg84 Thanks for your answer! Now makes a lot of sense and it works I am able to assign ids :)