Backwards compatible
-
Have been on ”MySensors” some time now, and have made sensors on protocol #1 (lib 1.x) and been using at Ethernet gateway that has been working fine – but not anymore. My controller is a Domoticz on a RPI.
My first problem is of case that I need a new gateway, and it seems naturally that I move on to lib version 2.x, but can I use a 2.x gateway and then receive 1.x messages from my sensors?. I only have sensors that e.g. report temperature to my controller.
So is 2.x gateway backwards compatible – or what do I do in practice?/Kurt
-
Have been on ”MySensors” some time now, and have made sensors on protocol #1 (lib 1.x) and been using at Ethernet gateway that has been working fine – but not anymore. My controller is a Domoticz on a RPI.
My first problem is of case that I need a new gateway, and it seems naturally that I move on to lib version 2.x, but can I use a 2.x gateway and then receive 1.x messages from my sensors?. I only have sensors that e.g. report temperature to my controller.
So is 2.x gateway backwards compatible – or what do I do in practice?/Kurt
@kurtsejr no. Every release in 1.x is backwards compatible with 1.0.0
Every release in 2.x is backwards compatible with 2.0.0.2.x is not backwards compatible with 1.x.
See https://forum.mysensors.org/topic/4276/converting-a-sketch-from-1-5-x-to-2-0-x for a guide on how to upgrade your sketches to 2.x, in case you decide to go for an upgrade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login