Radio compatibility question
First of all, thanks 4 the great work!
Now, have got a few:
sx1278(ai thinker RA-02)-433
RFM95W <-- explicitly supported, yeah! like!
And i wonder wether this hardware is fully supported, and wether i can change the default frequencies (868 || 433) to other hardware supported frequencies (RA-02 suppports 410Mhz to 525Mhz).
Thanks 4 the answers in advance.
skywatch last edited by skywatch
@garfius According to this page.... https://www.mysensors.org/about/components#the-radio the only supported devices are listed as nrf24l01+, rfm69 and esp8266.
I guess if you are talented in programming you could add your own support for the items you listed and maybe share your success so that other can benefit too....
I can see no reason you cannot 'change the default frequencies' so long as the protocols stay intact and all nodes talking to the gw are on the same frequency.
But according to:
And other sources, HopeRF RFM9X are chinese clones of the original semtech sx127X, and these things works using same LoRa.h library from sandeep. So, i guess are practically identical.
Also, i checked MySensors.h compiler definitions, where can be seen 868 and 433 freq are allowed.
So, these radios maybe works...¿!?¿!
nagelc last edited by
I use the RA-01 with MySensors RFM95 drivers. Works just fine.
I have not tried to change the frequency though. I have only used 433Mhz.
Your answer is valuable to anyone.