Any mass produced prototyping shields for the pro mini?

[NeverDie]

I looked, and I'm not finding any. Surely, it cannot be true?

[hek]

https://www.sparkfun.com/products/9709

http://www.amazon.com/ProtoShield-for-Arduino-Pro-Mini/dp/B004G58TEE

[NeverDie]

Seems like there should be something better. I'm specifically thinking of how to cheaply yet cleanly hook up the RFM69x.

Ideally, all the pins would connect upwards into the protoboard so that it can be attached/detached cleanly just via header pins.

[NeverDie]

Here's an interesting board, becauseit also considers what kind of box it might ultimately go into:

http://www.ebay.com/itm/ARDUINO-ultimate-prototype-board-PROTO-SHIELD-/271050561349?pt=LH_DefaultDomain_2&hash=item3f1bdf5745

[NeverDie]

Actually, it looks as though virtually any 2.54 pitch prototyping board would easily mate with a pro mini. There's no "oops" with the pitch as there was with the Uno to prevent it.

[Sparkman]

@NeverDie Not exactly mass produced, but here are some other options:

https://oshpark.com/shared_projects/uXIff7XO

https://oshpark.com/shared_projects/pRJiKWxV

https://oshpark.com/shared_projects/nJ8HNuZj

Cheers
Al