temp sensor keep on loging status switch

[Dick]

I have a working sensor that checks the temp om 2 places. If needed it wil switch on/of a Fan. That is all working perfect only this sensor logs continue the status of the switch. i am using Domoticz.
the log looks like this:

2017-01-05 19:24:18.747 EventSystem: Event triggered: ventilator aan/uit_2
2017-01-05 19:24:18.741 (MySensors GW1) Temp (Temp serre)
2017-01-05 19:24:18.960 (MySensors GW1) Lighting 2 (Temp Fan switch)
2017-01-05 19:24:48.736 EventSystem: Event triggered: ventilator aan/uit_2
2017-01-05 19:24:48.730 (MySensors GW1) Temp (Temp serre)
2017-01-05 19:24:49.068 (MySensors GW1) Lighting 2 (Temp Fan switch)
2017-01-05 19:26:49.032 EventSystem: Event triggered: ventilator aan/uit_2
2017-01-05 19:26:49.027 (MySensors GW1) Temp (Temp binnen)
2017-01-05 19:26:49.182 (MySensors GW1) Lighting 2 (Temp Fan switch)
2017-01-05 19:27:49.049 EventSystem: Event triggered: ventilator aan/uit_2
2017-01-05 19:27:49.044 (MySensors GW1) Temp (Temp serre)
2017-01-05 19:27:49.291 (MySensors GW1) Lighting 2 (Temp Fan switch)
2017-01-05 19:28:48.988 EventSystem: Event triggered: ventilator aan/uit_2
2017-01-05 19:28:48.985 (MySensors GW1) Temp (Temp binnen)
2017-01-05 19:28:49.401 (MySensors GW1) Lighting 2 (Temp Fan switch)
2017-01-05 19:29:18.972 EventSystem: Event triggered: ventilator aan/uit_2 italicised text

This is my code

#include <MySensor.h>
#include <SPI.h>
#include <Bounce2.h>
#include <DallasTemperature.h>
#include <OneWire.h>

// Partie Température
#define COMPARE_TEMP 1 // Send temperature only if changed? 1 = Yes 0 = No

#define ONE_WIRE_BUS 3 // Pin where dallase sensor is connected 
#define MAX_ATTACHED_DS18B20 16
unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)
OneWire oneWire(ONE_WIRE_BUS); // Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
DallasTemperature sensors(&oneWire); // Pass the oneWire reference to Dallas Temperature. 
float lastTemperature[MAX_ATTACHED_DS18B20];
int numSensors=0;
boolean receivedConfig = false;
boolean metric = true; 
// Initialize temperature message
MyMessage msg(0,V_TEMP);

// Partie Relay
#define RELAY_PIN  A1  // Arduino Digital I/O pinnumber for relay 
#define BUTTON_PIN  A3   // Arduino Digital I/O pin number for button 
#define CHILD_ID 17   // Id of the sensor child
#define RELAY_ON 1
#define RELAY_OFF 0

Bounce debouncer = Bounce(); 
int oldValue=0;
bool state;

unsigned long previousMillis = 0;

MySensor gw;
MyMessage msg2(CHILD_ID,V_LIGHT);

void setup()  
{  
  // Startup up the OneWire library
  sensors.begin();
  // requestTemperatures() will not block current thread
  sensors.setWaitForConversion(false);

  gw.begin(incomingMessage, AUTO, true);

  // Send the sketch version information to the gateway and Controller
  gw.sendSketchInfo("Relay & Button", "1.0");
  gw.sendSketchInfo("Temperature Sensor", "1.1");
  
    // Fetch the number of attached temperature sensors  
  numSensors = sensors.getDeviceCount();
  Serial.print(numSensors);
  Serial.println(" temperature sensors detected");
  
 // Setup the button
  pinMode(BUTTON_PIN,INPUT);
  // Activate internal pull-up
  digitalWrite(BUTTON_PIN,HIGH);
  
  // After setting up the button, setup debouncer
  debouncer.attach(BUTTON_PIN);
  debouncer.interval(5);

  // Present all sensors to controller
  for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) {   
     gw.present(i, S_TEMP);
      }
  // Register all sensors to gw (they will be created as child devices)
  gw.present(CHILD_ID, S_LIGHT);

  // Make sure relays are off when starting up
  digitalWrite(RELAY_PIN, RELAY_OFF);
  // Then set relay pins in output mode
  pinMode(RELAY_PIN, OUTPUT);   
      
  // Set relay to last known state (using eeprom storage) 
  state = gw.loadState(CHILD_ID);
  digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF);
}


/*
*  Example on how to asynchronously check for new messages from gw
*/
void loop() 
{
  gw.process();

  // Relay button
  debouncer.update();
  // Get the update value
  int value = debouncer.read();
  if (value != oldValue && value==0) {
      gw.send(msg2.set(state?false:true), true); // Send new state and request ack back
  }
  oldValue = value;
  
  // Fetch temperatures from Dallas sensors
  sensors.requestTemperatures();

  // query conversion time and sleep until conversion completed
  //int16_t conversionTime = sensors.millisToWaitForConversion(sensors.getResolution());
  unsigned long currentMillis = millis();
  // sleep() call can be replaced by wait() call if node need to process incoming messages (or if node is repeater)
  // gw.wait(conversionTime);

// Read temperatures and send them to controller 
  if (currentMillis - previousMillis >= SLEEP_TIME) {
    // save the last time you read temperature
    previousMillis = currentMillis;
    for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) {
 
      // Fetch and round temperature to one decimal
      float temperature = static_cast<float>(static_cast<int>((gw.getConfig().isMetric?sensors.getTempCByIndex(i):sensors.getTempFByIndex(i)) * 10.)) / 10.;
   
      // Only send data if temperature has changed and no error
      #if COMPARE_TEMP == 1
      if (lastTemperature[i] != temperature && temperature != -127.00 && temperature != 85.00) {
      #else
      if (temperature != -127.00 && temperature != 85.00) {
      #endif
   
        // Send in the new temperature
        gw.send(msg.setSensor(i).set(temperature,1));
        // Save new temperatures for next compare
        lastTemperature[i]=temperature;
        }
     }
  }
} 
 
void incomingMessage(const MyMessage &message) {
  // We only expect one type of message from controller. But we better check anyway.
  if (message.isAck()) {
     Serial.println("This is an ack from gateway");
  }

  if (message.type == V_LIGHT) {
     // Change relay state
     state = message.getBool();
     digitalWrite(RELAY_PIN, state?RELAY_ON:RELAY_OFF);
     // Store state in eeprom
     gw.saveState(CHILD_ID, state);
    
     // Write some debug info
     Serial.print("Incoming change for sensor:");
     Serial.print(message.sensor);
     Serial.print(", New status: ");
     Serial.println(message.getBool());
   } 
}

Does anyone know why it produce that large amount of logs?

[flopp]

The nodes send the data every 30 second, the log is ok.
You will get one line in the log very time a node report something.
It look like you also have an Event that gets trigger every time one of the nodes send data.

[Dick]

Yes you are right there is an Event. Do I have to add a timer or delay function in it or something else?

[flopp]

Depends on what you want to do with these temp/relay?

The log will still get all these lines even if you add a delay.

[Dick]

this sensor only messure the temp on 2 different locations and as seen in the Event, if the temp inside (TEMP binnen temp) <- 20 and the temp in the glasshouse is >-26 the fan switch on and the second part of the Event only switch of the Fan if the temp inside is to high (>-26) or the temp in the glasshouse is <-27. that is all I want with this project. I only want the mesurement every 15 min for example

[flopp]

Ok.

Then change Sleeptime to 900000, today you have 30000

900000 = 60000 * 15 minutes

[Dick]

that was easy, I do it right away. Thanks for the support and this stopped me for changing other parts of the event of the code of the sensor.
Have a nice day!

[flopp]

This is not a battery node, right?

Because this node never sleep, so it will consume battery all the time.

[Dick]

no good to mention, That is a new project for me to build an efficience battery powered node. In this case it is powered by an external power source.

[flopp]